Solvent-Free C-Benzoylation and N-Benzoylation Reactions Using Microwave Heating

An ecofriendly and efficient microwave-irradiated solvent-free benzoylation method was developed. The procedure for C-benzoylation used 50 mol% AlCl₃ as a Lewis acid catalyst at 130 °C and was completed in 10 min. The isolated yield was between 71% and 100%. N-benzoylation was conducted in a catalyst-free environment at 130 °C in 10 min. The isolated yield was between 80% and 100%.

Synthesis of Diaryl Ethers Through the Copper-Catalyzed Arylation of Phenols with Aryl Iodides Using KF/Al2O3

An efficient synthesis of diaryl ethers by the copper-catalyzed arylation of phenols with a variety of aryl iodide susing KF/Al₂O₃ as a suitable base and CuI and 1,3 diphenyl-1,3 propandione as the catalyst is described.     

Pd-Cu–Mediated Synthesis of 2-Substituted Imidazo[1,2-α]pyridines in Water

The reaction of 2-amino-1-(2-propynyl)pyridinium bromide with various iodobenzenes, catalyzed by Pd-Cu, in the presence of sodium lauryl sulfate as the surfactant and cesium carbonate as the base, in water, leads to the formation of 2-substituted imidazo[1,2-α]pyridines.     

Mode-I interlaminar fracture behaviour of nanoparticle modified epoxy/basalt fibre-reinforced laminates

The effect of nano-reinforcements on fracture behaviour of bulk epoxy nanocomposites and mode-I interlaminar fracture toughness of filament-wound basalt fibre-reinforced laminates was studied. Fracture energy of the bulk epoxy nanocomposites significantly increased with acrylic tri-block-copolymer addition but remained unchanged with incorporation of nanoclay. Delamination fracture toughness was not influenced by the presence of nanoparticles in the matrix. Decreasing fibre volume fraction, on the other hand, significantly improved interlaminar fracture energy. Rigid fibres in these composites constrict the stress field ahead of the crack-tip. Hence, increasing resin content enhanced composite delamination energy by increasing the capacity for matrix deformation. Interlaminar crack propagation through the composite was observed to occur mainly by interfacial failure and matrix cracking.     

Physical and Rheological Characteristics of Emulsion Model Structures Containing Iranian Tragacanth Gum and Oleic Acid

The physical and rheological properties of oil in water model emulsion systems containing Iranian tragacanth gum (TG) (0.5, 1 g/100 ml emulsions), whey protein isolate (WPI) (2, 4 g/100 ml emulsions), and oleic acid (5, 10 ml/100 ml emulsions) were investigated for droplet-size distribution, creaming index, and rheological properties of emulsions. The shear-thinning behavior of all dispersions was modeled using power law, Cross, and Ellis models. The power law model described the flow behavior of dispersions for its lowest standard error (0.29) and highest determination coefficient (R²) (0.99). Rheological investigation showed that both loss (G″) and storage (G′) modules increased as gum and oil content increased. Delta degree was 0.1 and increased as frequency increased, indicating that liquid-like viscose behavior dominated solid-like elastic behavior. Droplet-size distribution was measured by light scattering and microscopic observations revealed a flocculated system. Gum, WPI, and oil contents decreased the emulsion creaming index with gum concentration having the greatest effect.     

Phase Behavior of Bicontinuous and Water/Diesel Fuel Microemulsions Using Nonionic Surfactants Combined with Hydrophilic Alcohol Ethoxylates

Bicontinuous and water-in-diesel microemulsions were formulated using single nonionic alkyl poly glycol ethers combined with hydrophilic alcohol ethoxylates. The phase behavior at temperatures ranging from 0°C to 50°C was investigated. Visual inspection as well as cross-polarizers were used to detect anisotropy. The fish phase diagrams were determined. The presence of the hydrophilic alcohol ethoxylates was necessary to initiate both types of microemulsions. Increasing the hydrophobic chain length of the surfactant led to a wider range of temperature stability at lower surfactant concentration. Meanwhile, increasing the ethylene oxide units in the headgroup by two units led to a phase diagram that is dominated by lyotropic liquid crystal. The formulated water in diesel microemulsions were tested experimentally in a 4-cylinder diesel engine. From this it is observed that the emissions of NO_x, soot, and CO₂ were reduced substantially compared to neat diesel, while for the CO the reduction occurs just at low load.      

Ethylene Glycol as New Mobile Phase for Resolution of Two-Component Mixture of Cationic Surfactants on Alumina Surface

Aqueous ethylene glycol (ethane 1,2 diol) as a green mobile phase has been used for thin layer chromatographic (TLC) studies of cationic surfactants on alumina layers. Nineteen solvent systems were used to examine the mobility of the surfactants and to discover the best TLC system for the selective separation of dodecyl trimethylammonium bromide (DTAB) from multi-component mixture of other surfactants. Among the TLC systems studied, M₃ (ethylene glycol: water, 8:2) was best for achieving the selective separation of DTAB from multi-component mixture of other surfactants because in this mobile phase mobility of all surfactants except DTAB were insignificant. Effect of organic additives in aqueous ethylene glycol mobile phase on the mobility of surfactants was examined. The results obtained on laboratory made alumina TLC plates and commercially available precoated alumina HPTLC plates were compared. The lower limits of detection of DTAB, CPC, CTAB, HDTAC, and TTAB were 0.02, 0.05, 0.04, 0.06, or 0.08 µg per zone respectively. The resolution of mixture of cationic surfactants was also examined in the presence metal cations as an impurity in the analyzed sample.     

The effect of ethanol on the phase behaviour and micro-rheology of liquid crystals

The effect of ethanol on the phase behaviour and micro-rheology of lyotropic liquid crystals (LC) has been studied using a binary mixture of monoglyceride (MG) and aqueous ethanol. The phase behaviour study reveals the structural modulation of surfactant aggregates with increasing ethanol concentration, namely a bicontinuous cubic phase (Ia3d) transitions to the lamellar phase (L_α), at a fixed MG concentration. This behaviour is explained by considering the critical packing parameter (CPP) of the surfactant molecule. Because ethanol dehydrates the surfactant head group (a _s), the CPP values increase (decreasing a _s) and thus the formation of larger CPP aggregates is favoured (i.e., the Ia3d–L_α transition occurs). Cross-polarised images and X-ray scattering data support this conclusion. The structural modulation of the LC has further been investigated using a diffusing wave spectroscopy technique. The correlation and relaxation times, determined from the intersection point at short and long time scales of the mean square displacement (MSD), decrease with increasing concentrations of ethanol, indicating structural modulation of the LC. The micro-viscoelastic moduli (G′ and G′′) derived from the Laplace transformation of the MSD decrease with increasing ethanol concentrations, due to the LC modulation. The thermal effects on the micro-rheology of the LC have also been studied.