Preparation of conductive,flexible and transparent films by in situ deposition of polypyrrole nanoparticles on polyethylene terephthalate

In this study polypyrrole (PPy) nanoparticles were deposited as a thin film on the modified surface of polyethyleneterephthalate (PET) by in situ chemical polymerization in the presence of sodium dodecylsulfate (SDS), sodium dodecylbenzenesulfonate (DBSNa) and mixture of them as the surfactant. The surface of PET was modified by KOH before deposition and was investigated for conductivity and adhesion of PPy nanoparticles to PET. Resulting conductive flexible films were characterized by UV–Vis spectroscopy, fieldemission scanning electron microscopy, contact angle measurements and four-point-probe technique for conductivity. Direct morphological observation (FESEM) and electrical measurements indicated that the morphology, conductivity and the nature of deposited PPy films depend on surfactant, surface modification of PET and monomer concentration. In optimized process condition, uniform conductive films of PPy were obtained with good adhesion to PET.     

Boron nitride nanotube (BNNT) as a sensor of hydroperoxyl radical (HO<Subscript>2</Subscript>): A DFT study

In this present study, the adsorption behavior of HO₂ radical on the exterior surface of (5, 0) zigzag boron nitride nanotube (BNNT) has been investigated. The electronic structures and geometries of studied complexes were calculated at B3LYP-D3/6-31++G (d, p) computational level. The value of adsorption energy for the most stable configuration (A) is obtained ?0.68 eV, indicating physisorption process. Meaningful change of HOMO–LUMO gap after adsorption confirming BNNT can be introduced as a promising sensor for sensing of HO₂ radical.     

Determination of migrated phthalic acid residues into edible oils using a green mode of air-assisted liquid–liquid microextraction followed by high-performance liquid chromatography–diode array detector

In this study, for the first time, an organic solvent-free air-assisted liquid–liquid microextraction method has been reported for the extraction and preconcentration of phthalic acids (o-phthalic acid, m-phthalic acid, and p-phthalic acid) from edible oil samples. The method is based on the repeated aspirating/injection of an alkaline aqueous solution and the oil sample mixture in a conical bottom centrifuge tube to form a cloudy solution. After phase separation by centrifuging, the sedimented phase is directly analyzed by high-performance liquid chromatography–diode array detection. Under the optimum extraction conditions, the method showed low limits of detection and quantification between 0.11–0.29 and 0.28–0.91 ng mL^?1, respectively. Extraction recoveries and enrichment factors were from 81 to 97% and 406 to 489, respectively. The relative standard deviations for the analysis of 5 ng mL^?1 of each analyte were less than 5.9% for intraday (n = 6) and interday (n = 5) precisions. Finally, different oil samples were successfully analyzed using the proposed method and m-phthalic acid, and p-phthalic acid were determined in some of them at ng mL^?1 level.     

Development of colorimetric sensor array for discrimination of herbal medicine

Today, traditional systems of medicines (such as herbal distillates) become important resources for providing healthcare benefits. The ability to discriminate among closely similar herbal products is critical to ensure their efficacy. This article proposes a pattern-based recognition approach for the rapid discrimination of herbal distillates using a low-cost and sensitive colorimetric sensor array composed of 25 indicators. The color changes of the sensor exposed to the vapor of the herbal distillates can be monitored easily with an ordinary flatbed scanner. The digital representation of the array response was analyzed with hierarchical clustering analysis (HCA) and principal component analysis (PCA). Using new variable selection strategy, 6 indicators among the 25 employed indicators were selected as discriminant elements of the array. So, a complete discrimination (with 100% accuracy) of 46 herbal distillates was achieved. The proposed sensor represented a better resolution when analytes were placed in an oven at 85 °C for 45 min. This colorimetric sensor array demonstrates excellent potential for quality assurance/control applications of herbal distillates.     

Rapid,green, and catalyst-free one-pot three-component syntheses of 5-substituted 1<Emphasis Type="Italic">H</Emphasis>-tetrazoles in magnetized water

The catalyst-free multi-component reactions of aldehydes, malononitrile, and sodium azide at a relatively low temperature in magnetized water provided 5-substituted 1H-tetrazoles in high-to-excellent yields. This method offers the advantages of short reaction times, low costs, quantitative reaction yields, simple work-up, green, and no need for any organic solvent.     

Vibratio nal assig nme nts,co nformatio nal a nalysis,a nd molecular structures of $$\left[ {\text{C}_{\text{ n}} \text{mim}} \right]\left[ {\text{NTF}_{\text{2}} } \right]$$C nmimNTF2 ( n = 2, 4, 6, a nd 8) imidazolium-based io nic liquids: a combi ned experime ntal a nd qua ntum chemical approach

This work is aimed at providing physical insights about the interactions of cations, anion, and ion pairs of four imidazolium-based ionic liquids of \(\left[ {{\text{C}}_{\text{n}} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) with varying alkyl chain lengths (n = 2, 4, 6, and 8) using both DFT calculations and vibrational spectroscopic measurements (IR absorption and Raman scattering) in the mid- and far regions. The calculated Mulliken charge distributions of \(\left[ {{\text{C}}_{\text{n}} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) ion pairs indicate that hydrogen-bonding interactions between oxygen and nitrogen atoms (more negative charge) on \(\left[ {{\text{NTF}}_{2} } \right]^{ - }\) anion and the hydrogen atoms (more positive charge) on the imidazolium ring play a dominating role in the formation of ion pair. Thirteen stable conformers of \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) were optimized. According to our results, the strongest and weakest hydrogen bonds were existing in \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) and \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), respectively. A redshift of 290, 262, 258, and 257 cm^?1 has been observed for cations involving \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]^{ + }\), \(\left[ {{\text{C}}_{4} {\text{mim}}} \right]^{ + }\),\(\left[ {{\text{C}}_{6} {\text{mim}}} \right]^{ + }\), and stretching vibrations of \({\text{C}}12{-}{\text{H}}3\), respectively. By increasing the chain length, the strength of hydrogen bonds decreases as a result of \({\text{C}}12{-}{\text{H}}3\) bond elongation and less changes are observed in stretching vibrations of \({\text{C}}12{-}{\text{H}}3\) compared to the free cations. To the best of our knowledge, this research is the first work which reports the far-IR of \(\left[ {{\text{C}}_{4} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), \(\left[ {{\text{C}}_{6} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), and \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) and the mid-IR of \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\).     

A comparison of the inclusion behavior of human serum albumin and holo transferrin with fluoxymesterone in the presence of three different cyclodextrins

This article describes the interaction of fluoxymesterone (Flu) with HSA and HTF in the absence and presence of cyclodextrins (CDs) (α, β and γ). According to fluorescence data, the binding of Flu to the proteins caused strong static quenching in the binary and ternary systems. The fluorescence quenching results demonstrated that HSA and HTF had two and one class of apparent binding sites with a distinct binding constant in the presence of the CDs, respectively. The effects of Flu on the structure of HSA and HTF were analyzed using synchronous fluorescence spectroscopy, which showed that the interaction of Flu with both proteins in the binary and ternary systems altered the microenvironment around the Trp and Tyr residues. The distance, r, between Flu and the proteins was obtained according to FRET which pointed at a successful formation of a drug-protein complex. Far-UV CD spectra indicated that the binding of the drug to both proteins induced changes in the secondary structure of HSA and HTF in the binary and ternary systems. Finally, molecular modeling provided possible binding sites of Flu within the proteins for the binary and ternary systems and also confirmed the experimental results. The obtained data can be useful for determining usage drug doses in drug delivery.     

Inhibitory effect of safranal and crocin,two principle compounds of <Emphasis Type="Italic">Crocus sativus</Emphasis>, on fibrillation of lysozyme

A key feature in more than twenty amyloid-related diseases is the aggregation of intra-and/or extracellular misfolded proteins as amyloid fibrils. Therefore, preventing or reversing amyloid aggregation by using of small molecules is considered as useful approaches to the treatment of these diseases. We have evaluated the ability of safranal and crocin, to inhibit amyloid self-assembly of hen egg white lysozyme (HEWL), as an in vitro model system. Structural properties of HEWL in the presence of these compounds were investigated individually using thioflavin T, anilinonaphthalene-8-sulfonic acid fluorescence assays, far-UV circular dichroism and scanning electron microscopy as well as docking method. Our results showed that incubation of HEWL with either crocin or safranal at various concentrations leads a significant inhibition in the rate of amyloid formation. Docking analysis revealed crocin and safranal interact with the central hydrophobic region of lysozyme through van der Waals interaction. Hydroxyl group in crocin through hydrogen bonds connected to the several hydrophilic amino acids of lysozyme, while in safranal there are just one aldehyde group that through hydrogen bonds connected to aspartic acid in lysozyme. It can be concluded that both hydrophobic and hydrophilic groups contribute to lower lysozyme fibril accumulation.     

Supercritical carbon dioxide extraction and analysis of lipids from <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> using gas chromatography

The influence of six different supercritical carbon dioxide extraction conditions on the quantity and quality of the extracted lipids from Chlorella vulgaris (C. vulgaris) was examined using experimental design. The investigated parameters included dynamic extraction times (45 and 90 min), pressures (300 and 350 bars) and a modifier (with and without ethanol). By using a grinding method prior to the extraction, cells were disrupted resulting in an enhanced extraction yield. The results showed that the total lipid yields increased by increasing the pressure, extraction time and the modifier. Applying harsher extraction conditions increased the extraction of longer-chain fatty acids (FAs), changed the FA compositions and enhanced the total lipid yield. Using transesterification, the extracted lipids were converted to biodiesel. The biodiesel physiochemical properties were estimated using empirical equations based on the fatty acid methyl ester contents. Furthermore, analysis of the protein content of remaining biomass showed a decrease in protein content with increasing the lipid extraction yield.     

Semi-automated salt-assisted liquid–liquid extraction coupled to high-performance liquid chromatography to determine three aromatic hydrocarbons in aqueous samples

In this study, a new device for semi-automated salt-assisted liquid–liquid extraction was designed and coupled with high-performance liquid chromatography (HPLC) to determine three aromatic hydrocarbons in aqueous samples. In order to evaluate the performance of the designed device, three aromatic hydrocarbons including 2-naphthol, naphthalene and anthracene were selected as model analytes. Sample solution, extraction solvent and salt solution using separate channels were transferred to a sample holder, respectively. These three components were mixed using a magnetic stirrer. After stirrer stopping, the aqueous and organic phases were separated and organic layer transferred to the injection loop of HPLC system. Optimization process was achieved using response surface methodology by Design-Expert software. A central composite design was used to optimize the main parameters including pH (A), stirrer time (B), organic solvent volume (C) and salt concentration (D). The limit of quantitation for 2-naphthol, naphthalene and anthracene was 15.0, 25.0 and 1.0 ng mL^?1, respectively. Under the optimum conditions, obtained recoveries for three analytes were in the range of 76.0–96.2% with relative standard deviation less than 8.2%. The salt-assisted liquid–liquid extraction method using the proposed device has been successfully used for the analysis of real samples containing studied analytes in various matrices.