Silver(I)-selective coated-wire electrode based on an octahydroxycalix[4]arene derivative.

The performance of octahydroxycalix[4]arene derivative used as a neutral carrier for silver polymeric membrane electrode was studied. The sensor gave a good Nernstian response of 58 +/- 1 mV per decade for silver ion in the activity range 3.3 x 10(-6) to 3.3 x 10(-2) M Ag+. The limit of detection reached 2.1 x 10(-6) M Ag+ and exhibited high selectivity for silver ion against the alkali, alkaline earth and transition metal ions. The sensor can be used in wide pH range from 1.5 to 6.5. The response time of the sensor is less than 20 s. The potentiometric sensor was used as the indicator electrode in the titration of Ag+ ions by sodium chloride solution.     

Constructing a new optical sensor for monitoring ammonia in water samples using bis(acetylacetoneethylendiamine)-tributylphosphin cobalt(III) tetraphenylborate complex-coated triacetylcellulose.

A new ammonia optical sensor was designed using bis(acetylacetoneethylendiamine)tributylphosphin cobalt(III) tetraphenylborate complex, coated on transparent triacetylcellulose film as membrane. The change in the absorbance of the optode at the maximum wavelength of 408 nm was related to ammonia concentration in aqueous samples. A buffer solution with a pH of 9 (sodium borate-HCl) was used. The optode was fully regenerated in pH 2. The linear dynamic range for determination of ammonia was 3.3 x 10(-4) to 6.9 x 10(-3) mol l(-1) with a detection limit of 5.0 x 10(-5) mol l(-1) and a response time range of 4 - 6 min. This membrane was successfully applied for determination of ammonia in drinking water.     

Coated wire silver-ion selective electrode based on a N,N'-bis(2-thienylmethylene)-1,2-diaminobenzene.

A novel membrane coated platinum-wire electrode (MCPWE) based on N,N'-bis(2-thienylmethylene)-1,2-diaminobenzene (BTMD) for highly selective determination of Ag+ ion has been developed. The influences of membrane composition and pH on the potentiometric responses of electrode were investigated. The potentiometric responses are independent of the pH of the test solution in the range of 5.0 - 9.0. The electrode shows a linear response for Ag+ ion over the concentration range of 1.0 x 10(-60 to 1.0 x 10(-1) M with a lower detection limit of 6.0 x 10(-7) M. The electrode possesses a Nernstian slope of 59.7 mV decade(-1) and a fast response time of < or = 17 s and can be used for at least 2 months without any observable deviation. The proposed electrode displayed very good selectivity for Ag+ ion with respect to NH4+ and alkali, alkaline earth and some common transition metal ions. The practical utility of the electrode has been demonstrated by its use as the indicator electrode in the potentiometric titration of an AgNO3 solution with a NaI solution and in determination of the silver content of a developed radiological film.     

Some inequalities for the polar derivative of a polynomial

LetP(z) be a polynomial of degreen which does not vanish in |z|<1. In this paper, we estimate the maximum and minimum moduli of thekth polar derivative ofP(z) on |z|=1 and thereby obtain compact generalizations of some known results, which among other results, yields interesting refinements of Erdos-Lax theorem and a theorem of Ankeny and Rivlin.     

The convex hull property and topology of hypersurfaces with nonnegative curvature

We prove that, in Euclidean space, any nonnegatively curved, compact, smoothly immersed hypersurface lies outside the convex hull of its boundary, provided the boundary satisfies certain required conditions. This gives a convex hull property, dual to the classical one for surfaces with nonpositive curvature. A version of this result in the nonsmooth category is obtained as well. We show that our boundary conditions determine the topology of the surface up to at most two choices. The proof is based on uniform estimates for radii of convexity of these surfaces under a clipping procedure, a noncollapsing convergence theorem, and a gluing procedure.     

Highly selective PVC-membrane electrodes based on Co(II)-Salen for determination of nitrite ion.

A cobalt(II) derivative was used as a suitable ionophore for the preparation of a polymeric membrane nitrite-selective electrode. The electrode reveals a Nemstian behavior over a very wide NO2- ion concentration range (1.0 x 10(-6)-1.0 x 10(-1) M) and a very low detection limit (5.0 x 10(-7) M). The potentiometric response is independent of the pH of solution in the pH range 4.0-9.5. The electrode shows advantages such as low resistance, fast response and, most importantly, good selectivity relative to a wide variety of inorganic and organic anions. In fact, the selectivity behavior of the proposed NO2- ion-selective electrode shows great improvements compared to the previously reported electrodes for nitrite ion. The proposed electrodes could be used for at least 2 months without any significant changes in potentials. The electrode was successfully applied to the determination of nitrate ion concentrations in sausage and milk samples.     

A neutron polarization analysis study of Ce2Fe17 in its paramagnetic phase

Spin-flip (paramagnetic) scattering and neutron depolarization studies were performed on Ce₂Fe₁₇ in its paramagnetic phase on the Dhruva neutron polarization analysis spectrometer. The absence of normalQ dependence of the scattered spin flip intensity shows that Ce₂Fe₁₇ is not a normal paramagnetic and there exist superparamagnetic clusters of sufficiently large dimensions (～100Å). The observed neutron depolarization gives an indication of the dynamics of these Ce₂Fe₁₇ superparamagnetic clusters.     

Novel monohydrogenphosphate sensor based on vanadyl salophen

A novel PVC-based membrane sensor based on vanadyl salophen (VNSP) for determination of trace amounts of monohydrogenphosphate (MHP) ions is introduced. The electrode revealed Nernstian response towards monohydrogenphosphate over the wide concentration range from 1.0×10⁻¹ to 1.0×10⁻⁶ M at the pH of 8.2. The effect of solvent mediator, cationic additives and amount of ion-carrier on the behavior of the sensor was investigated. The sensor shows a short response time (<20 s) in the whole concentration ranges. The selectivity of the electrode is very high, and it can be used for detection of trace amounts of monohydrogenphosphate in the presence of large amounts of other anions. The detection limit of the electrode was 5.0×10⁻⁷ M (48 ng/ml) and it could be used for 14 weeks without any measurable changes in the slope. The potentiometric selectivity coefficients data revealed negligible interference from 16 common anions. It was successfully applied for the direct determination of monohydrogenphosphate in fertilizer samples and, as an indicator electrode, in potentiometric titration of HPO₄²⁻ ion with barium nitrate.     

Solid-liquid extraction and preconcentration of trace nickel using 2-nitroso-1-naphthol-4-sulfonic acid (Nitroso-S) and TDBA onto benzophenone and determination by atomic absorption spectrometry.

Nickel was quantitatively retained by 2-nitroso-1-naphthol-4-sulfonic acid (Nitroso-S) and tetradecyldimethylbenzylammonium chloride (TDBA Cl) onto benzophenone in the pH range 5.0-6.0 from large volumes of aqueous solutions of various samples. After filtration, each solid mass consisting of a nickel complex and benzophenone was dissolved with 5 ml of dimethylformamide (DMF) and the metal was determined by atomic absorption spectrometry (AAS). About 0.6 microg of nickel could be concentrated from 200 ml of an aqueous sample, where its concentration was as low as 3.0 ng/ml. Eight replicate determinations of 2.5 microg/ml of nickel in the final DMF solution gave a mean absorbance of 0.112 with a relative standard deviation of 1.9%. The sensitivity for 1% absorption was 98 ng/ml. The interference of a number of anions and cations was studied and the developed optimized conditions were utilized for the trace determination of nickel in various alloys and biological samples.     

Isolating the most recent entry in a random recursive tree by random cuts

A recursive tree is constructed by starting with a root node and repeatedly adjoining new nodes to one node of the tree already constructed. Such a tree can represent, for example, the heirarchy of a workforce of a company that grows via recruiting. At times of economic depression, the company may decide to lay off participants, and in some cases it is a fair policy to relieve the last senior worker (most recent entry in the tree). If we remove an edge from such a tree then it falls into two subtrees one of which contains the most recent entry. If we continue to remove edges from the successively smaller subtrees that contain the most recent entry, we eventually isolate the most recent entry. We consider how many randomly selected edges must be removed in average before isolating the most recent entry by this procedure.