Novel monohydrogenphosphate sensor based on vanadyl salophen

A novel PVC-based membrane sensor based on vanadyl salophen (VNSP) for determination of trace amounts of monohydrogenphosphate (MHP) ions is introduced. The electrode revealed Nernstian response towards monohydrogenphosphate over the wide concentration range from 1.0×10⁻¹ to 1.0×10⁻⁶ M at the pH of 8.2. The effect of solvent mediator, cationic additives and amount of ion-carrier on the behavior of the sensor was investigated. The sensor shows a short response time (<20 s) in the whole concentration ranges. The selectivity of the electrode is very high, and it can be used for detection of trace amounts of monohydrogenphosphate in the presence of large amounts of other anions. The detection limit of the electrode was 5.0×10⁻⁷ M (48 ng/ml) and it could be used for 14 weeks without any measurable changes in the slope. The potentiometric selectivity coefficients data revealed negligible interference from 16 common anions. It was successfully applied for the direct determination of monohydrogenphosphate in fertilizer samples and, as an indicator electrode, in potentiometric titration of HPO₄²⁻ ion with barium nitrate.     

Solid-liquid extraction and preconcentration of trace nickel using 2-nitroso-1-naphthol-4-sulfonic acid (Nitroso-S) and TDBA onto benzophenone and determination by atomic absorption spectrometry.

Nickel was quantitatively retained by 2-nitroso-1-naphthol-4-sulfonic acid (Nitroso-S) and tetradecyldimethylbenzylammonium chloride (TDBA Cl) onto benzophenone in the pH range 5.0-6.0 from large volumes of aqueous solutions of various samples. After filtration, each solid mass consisting of a nickel complex and benzophenone was dissolved with 5 ml of dimethylformamide (DMF) and the metal was determined by atomic absorption spectrometry (AAS). About 0.6 microg of nickel could be concentrated from 200 ml of an aqueous sample, where its concentration was as low as 3.0 ng/ml. Eight replicate determinations of 2.5 microg/ml of nickel in the final DMF solution gave a mean absorbance of 0.112 with a relative standard deviation of 1.9%. The sensitivity for 1% absorption was 98 ng/ml. The interference of a number of anions and cations was studied and the developed optimized conditions were utilized for the trace determination of nickel in various alloys and biological samples.     

Isolating the most recent entry in a random recursive tree by random cuts

A recursive tree is constructed by starting with a root node and repeatedly adjoining new nodes to one node of the tree already constructed. Such a tree can represent, for example, the heirarchy of a workforce of a company that grows via recruiting. At times of economic depression, the company may decide to lay off participants, and in some cases it is a fair policy to relieve the last senior worker (most recent entry in the tree). If we remove an edge from such a tree then it falls into two subtrees one of which contains the most recent entry. If we continue to remove edges from the successively smaller subtrees that contain the most recent entry, we eventually isolate the most recent entry. We consider how many randomly selected edges must be removed in average before isolating the most recent entry by this procedure.     

Identification and Separation of Some Anions on Plain and Mixed Adsorbent Layers Using Water as Eluent

The analytical potential of water as an eluent in thin layer chromatographic separation of various anions on plain adsorbent layers (silica gel "G" alumina, and cellulose) as well as on beds containing different combinations of silica gel, alumina, or cellulose has been investigated. In addition to some important separation of anions, microgram separation of IO⁻₄ from milligram quantities of IO⁻₃, Bro⁻₃, MoO²⁻₄, and Fe (CN)³⁻₆ has been realized. The effect on pH of the sample in the separation of IO⁻₄ from accompanying ions has also been studied. The limits of detection and dilution limits of anions on alumina thin layers have been determined. NO⁻₂ in artificial seawater has been detected. The effect of CaCl₂, MgCl₂, and NaHCO₃ on some ternary separations of analytical importance has been examined.     

Bis(2-hydroxyacetophenone)ethylenediimine as a neutral carrier in a coated-wire membrane electrode for lead(II).

A coated-wire ion-selective electrode (CWISE), based on a Schiff base as a neutral carrier, was successfully developed for the detection of Pb(II) in aqueous solution. CWISE exhibited a linear response with a Nernstian slope of 29.4 +/- 0.5 mV/decade within the concentration range of 1.0 x 10(-5) - 1.0 x 10(-1) M lead ion. CWISE has shown detection limits of 5.0 x 10(-6) M. The electrode exhibited good selectivity over a number of alkali, alkaline earth, transition and heavy metal ions. This sensor yielded a steady potential within 10 to 20 s at a linear dynamic range. The electrode was suitable for use in aqueous solutions in a pH range of 2.0 to 5.0. Applications of this electrode for the determination of lead in real samples and as indicator electrode for potentiometric titration of Pb2+ ion using K2CrO4 are reported.     

Analysis of anions by solid-state spot-tests

Trituration and capillary solid-state spot-tests for 25 anions with a number of organic and inorganic reagents have been examined. A comparative study of the corresponding reactions in solution has also been made. Incorporation of a glass-wool plug in the capillary improves the selectivity. Schemes are presented for possible use of the technique.     

A Method for the Acetylation of Alcohols Catalyzed by Heteropolyoxometallates

Summary. Esterifications of acetic acid with some linear, secondary, tertiary, and benzylic alcohols mediated by catalytic amounts of Keggin, Wells–Dawson, and Preyssler type heteropolyacids were carried out under reflux at mild reaction conditions with good to excellent yields. Among the examined catalysts, H₃PW₁₂O₄₀ and H₁₄NaP₅W₃₀O₁₁₀ revealed better results than other heteropolyacids. This work was performed with the aim of simplifying the esterification process by omitting any solvents and mineral acid catalysts. Easy work-up, low cost, and acidic waste reduction, which are all important features from the environmental and economical points of view, are distinct aspects of this protocol. Heteropolyacid catalysts could be separated after a simple work-up and reused for several times.     

Water as an Efficient Solvent for Oxygenation Transformations with 34% Hydrogen Peroxide Catalyzed by some Heteropolyoxometalates

Summary. A highly efficient, selective, fast, and cheap protocol is developed for oxidation of aromatic amines and alcohols utilizing 34% hydrogen peroxide in water catalyzed by some W- and Mo-based heteropolyoxometalates. Findings showed that dodecatungstophosphoric acid, H₃PW₁₂O₄₀, was the most efficient catalyst in the examined oxidation reactions. This methodology may prove to be a valuable alternative for eco-friendly green oxidation. Inherent simplicity, easy work up, and using regenerable catalysts were other key aspects of this oxidation protocol.     

Headspace solvent microextraction of trihalomethane compounds into a single drop

Headspace solvent microextraction (HSME) into a single drop is developed for the determination of six trihalomethanes, CH2Cl2, CHCl3, C4H9Cl, CCl4, C2HCl3, and C2Cl4, in aqueous solution. A drop of benzyl alcohol containing bromoform, as an internal standard, is used for extraction. The analytes are extracted by suspending a 3-microL drop directly from the needle of a microsyringe. The needle passes through the septum of a vessel, and the needle tip appears above the surface of the solution. After the prescribed extraction time, the drop is drawn back into the syringe. The syringe is then removed, and its content is injected directly into a gas chromatography column for analysis. The main parameters affecting the HSME process, such as stirring speed, microdrop volume, sample solution temperature, microsyringe needle temperature, sample volume, solution pH, extracting solvent, and ionic strength of the solution, are studied. Also, the linear range and precision of the method are examined.     

SnCl4 and SbCl5 promoted aromatization of enamines

Aromatic amines have been synthesized efficiently from enamines using SnCl₄ and SbCl₅ in CH₂Cl₂ at room temperature.