Solid phase extraction of gold by sorption on octadecyl silica membrane disks modified with pentathia-15-crown-5 and determination by AAS

A simple and selective method for rapid and efficient concentration and determination of μg l⁻¹ levels of Au(III) ions in aqueous solution using octadecyl silica membrane disks modified by pentathia-15-crown-5 and flame atomic absorption spectrometry is presented. The influence of flow rates of eluent and sample solution, amount of ligand, types and least amount of eluent for elution of Au from disks were investigated. Break through volume and limit of detection of the membrane disks modified by 5 mg of the thiacrown ether was found to be 2.0 l and 1.0 μg l⁻¹, respectively. The effects of various cationic interferences on percent recovery of gold were studied. The method was successfully applied for the determinations of gold in some pharmaceutical samples and for the recovery of trace Au³⁺ ions from synthetic and water samples.     

Ion exchangers as catalysts. II. Catalytic decomposition of hydrogen peroxide with resin-ethylenediamine-copper(II) complex ions

Summary The slow decomposition of H₂O₂ in the presence of Dowex-50 W resin in the form of an ethylenediaminecopper(II) complex ion in water is accompanied by an induction period. The reaction is first order with respect to [H₂O₂] and the rate constant (perg of dry resin) was deduced. Autocatalytic behaviour was found for the H₂O₂ decomposition with 2% crosslinked divinylbenzene. The induction period disappeared and the reaction rate increased when the decomposition was carried out with a resin in the form of a peroxo-copper complex, which proves that the formation of an intermediate (active species) retards the reaction rate. The precursor of the active species, formed during the induction period, was not the amine-copper(II) complex ion but a product of the latter with H₂O₂. It proved impossible to carry out the decomposition in acid or buffer solutions, in which the resin is regenerated.     

The thermal dissociation of some metal cupferrate chelates

The thermal dissociation of the cupferron complexes with Cu(II), Ni, Co(II), Zn, Cd, Mn(II), Hg(II), Mg, Ca, Ba, Sr, Al, Fe(III). Ce(III), La, and Nd was studied by differential thermal analysis (DTA) and by pyrolysis into a mass spectrometer. The DTA curves consisted mainly of endothermic peaks although some contained exothermic peaks as well. The mass spectrometer showed that cupferron decomposes slightly above room temperature, giving off N₂, NO, N₂O, NH₃ and H₂O. A mechanism for the thermal dissociation of the coppcr(II) cupferrate is proposed.     

Transfer of radiation technology to developing countries

Transfer of technology is a complex process with many facets, options and constraints. While the concept is an important step in bringing industrialization process to agricultural based countries, it is clear, however, that a country will only benefit from a new technology if it addresses a real need, and if it can be absorbed and adapted to suit the existing cultural and technological base.

International Atomic Energy Agency, as UN body, has a mandate to promote nuclear applicationsand assist Member States in transfer of technology for peaceful applications. This mandate has been pursued by many different mechanisms developed in the past years: technical assistance, coordinated research programmes, scientific and technical meetings, publications, etc. In all these activities the Agency is the organizer and initiator, but main contributions come from expert services from developed countries and, increasingly, from developing countries themselves. The technical cooperation among developing coutries more and more becomes part of different programmes.

In particular, regional cooperation has been demonstrated as an effective instrument for transfer of technology from developed and among developing countries.

Some examples of actual programmes are given.     

Comparison of analytical techniques to quantify malondialdehyde in milk powders

Several analytical methods were compared to quantify malondialdehyde (MDA) in milk powders. Modified thiobarbituric acid (TBA) methods, using either visible spectrophotometry (direct absorbance reading or after third derivative transformation of the spectrum) or HPLC, required derivatisation at elevated temperature, which appeared to catalyse artefactual MDA formation and thus overestimate the MDA content. In contrast to the TBA derivatisation method, the measurement of MDA as the dinitrophenylhydrazone derivative by HPLC or as the phenylhydrazone product by GC-MS with a deuterated internal standard resulted in lower estimates in the ranges of 2-17- and 3-30-fold, respectively; apparently due to the milder derivatisation conditions. The estimates of MDA determined by both HPLC-UV and GC-MS techniques result in lower values which are similar in magnitude even though the GC-MS technique is more sensitive.     

Stability-indicating methods for determination of pyritinol dihydrochloride in the presence of its precursor and degradation product by derivative spectrophotometry

A first-derivative spectrophotometric (1D) method and a derivative-ratio zero-crossing spectrophotometric (1DD) method were used to determine pyritinol dihydrochloride (I) in the presence of its precursor (II) and its degradation product (III) with 0.1N hydrochloric acid as a solvent. Linear relationships were obtained in the ranges of 6-22 microg/mL for the (1D) method and 6-20 microg/mL for the (1DD) method. By applying the proposed methods, it was possible to determine pyritinol dihydrochloride in its pure powdered form with an accuracy of 100.36 +/- 1.497% (n = 9) for the (1D) method and an accuracy of 99.92 +/- 1.172% (n = 8) for the (1DD) method. Laboratory-prepared mixtures containing different ratios of (I), (II), and (III) were analyzed, and the proposed methods were valid for concentrations of < or = 10% (II) and < or = 50% (III). The proposed methods were validated and found to be suitable as stability-indicating assay methods for pyritinol in pharmaceutical formulations.     

Analysis of selected pesticides and alkylphenols in human cord blood by gas chromatograph-mass spectrometer

A total of seven pesticides and eight alkylphenols were monitored using this method for the determination of their trace levels in human cord blood. The pesticides are lindane, diazinon, α-endosulfan, β-endosulfan, endosulfan sulfate, chlorpyrifos and endrin; while the alkylphenols are 4-n-butylphenol, 4-n-pentylphenol, 4-n-hexylphenol, 4-t-octylphenol, 4-n-heptylphenol, nonylphenol, 4-n-octylphenol and bisphenol A. The pesticides and alkylphenols in the cord blood samples were extracted with solid phase extraction IST C18 cartridges and analyzed by selected ion monitoring mode using quadrapole detector in Shimadzu QP-5000 gas chromatograph-mass spectrometer. Trace levels of pesticide and alkylphenols in the range of non-detectable to 15.17 ng ml⁻¹, were detected in the human cord blood samples. This technique of monitoring the levels of endocrine-disruptors in blood samples is consistent, reliable and cost effective while reducing wastage of time and solvents.     

Computer-assisted optimization of reversed-phase HPLC isocratic separation of neutral compounds

An appropriate optimization strategy should be used to find a desired resolution or selectivity with a minimum number of experiments in a limited time, which could assure the baseline separation of all target compounds. It was usually realized by means of a specialized computer program. In this paper, mapping optimization method and overlapping resolution mapping were compared for the optimization of a reversed-phase high-performance liquid chromatography (HPLC) isocratic separation of neutral compounds. The calculated resolutions and separation time of 7 to 10 experiments are fitted by different equations, which were used to build a contour plot with a minimum effective resolution and maximum retention time as a function of a mobile phase composition. The balance between resolution and analysis time could be easily realized by the overlapping of the final overlapping resolution mapping and analysis time mapping. The validity of the two methods was confirmed by some typical experiments. The models are simple, visual, and common without theoretical arithmetic.     

Umbellactal, a novel diterpenoid from the Formosan soft coral Xenia umbellata

Umbellactal, isolated from the soft coral Xenia umbellata, is an unprecedented diterpenoid. The structure of umbellactal was established by extensive analysis of spectroscopic data.     

Structures and energies of seleno derivatives of biuret.Ab Initio comparative studies of diselenobiuret, selenobiuret, and selenothiobiuret

Ab initio studies (LCAO-MO method) on conformers of three seleno derivatives of the biuret molecules diselenobiuret [I], selenobiuret [II], and selenothiobiuret [III] were carried out at the Hartree-Fock (HF) and MP2 levels. The molecular geometries of these species were fully optimized at the HF level and characterized by analysis of the harmonic vibrational frequencies using a split-valence triple-zeta basis set augmented by a set ofd polarization functions on heavy atoms andp polarization functions on hydrogen atoms [TZP(d, p)]. The total energies of the HF-optimized structures were calculated at the MP2 (frozen core) level using a larger TZP (2df, 2pd) basis set. The potential energy searches revealed a total of 11 minimum-energy conformers (assigned astrans-trans, trans-cis, cis-trans, andcis-cis) and seven transition-state species for the title molecules. The two predicted conformers for diselenobiuret (Ia=trans-trans andIc=cis-cis) are characterized byC ₂ and the third byC _s symmetry. For selenothiobiuret two forms (IIIa=trans-trans andIIId=cis-cis) possessC ₁ and two (IIIb=trans-cis andIIIc=cis-trans) possessC _s symmetries, respectively. For selenobiuret, four formsIIa=trans-trans (C₁),IIb=trans-cis (C _s),IIc=cis-trans (C ₁), andIId=cis-cis (C₁), were obtained as a result of gradient optimization. Comparison of the relative energies for the considered species indicated that thecis-trans forms are the most stable conformations for all three systems at both the HF and MP2 levels of theory.