Sonochemical syntheses of a new nano-plate cadmium(II) coordination polymer as a precursor for the synthesis of cadmium(II) oxide nanoparticles

Nanoplates of the three-dimensional coordination polymer, {[Cd(3)(3-pyc)(4)(N(3))(2)(H(2)O)](n) (1), 3-pyc(-)=pyridine-3-carboxylate), have been synthesized by a sonochemical process and characterized by scanning electron microscopy, X-ray powder diffraction, IR spectroscopy and elemental analyses. Cadmium(II) oxide nanoparticles were prepared from thermal decomposition in oleic acid and direct calcination of compound 1 at different temperatures. The thermal stability of nano-sized compound 1 was studied by thermal gravimetric (TG) and differential thermal analyses (DTA). Results show that the size and morphology of the CdO nanoparticles are dependent upon the particles size of compound 1 and the thermolysis temperature. A decrease in the particle size of compound 1 leads to a decrease in the particle size of the CdO, while an increase in the processing temperature leads to an increase in the particle size of the produced cadmium(II) oxide nano-particles.     

A selective sensor for nanolevel detection of lead (II) in hazardous wastes using ionic-liquid/Schiff base/MWCNTs/nanosilica as a highly sensitive composite

An effective potentiometric sensor had been fabricated for the rapid determination of Pb²⁺ based on carbon paste electrode consisting of room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF₆), multiwalled carbon nanotubes (MWCNTs), nanosilica, synthesized Schiff base, as an ionophore, and graphite powder. The constructed nanocomposite electrode showed better sensitivity, selectivity, response time, response stability, and lifetime in comparison with typical Pb²⁺ carbon paste electrode for the successfully determination of Pb²⁺ ions in water and in waste water samples. The best response for nanocomposite electrode was obtained with electrode composition of 18% ionophore, 20% BMIM-PF₆, 49% graphite powder, 10% MWCNT, and 3% nanosilica. The new electrode exhibited a Nernstian response (29.76?±?0.10 mV decade^?1) toward Pb²⁺ ions in the range of 5?×?10^?9?C1.0?×?10^?1 mol L^?1 with a detection limit of 2.51?×?10^?9 mol L^?1. The potentiometric response of prepared sensor is independent of the pH of test solution in the pH range of 4.5?C8.0. It has quick response with response time of about 6 s. The proposed electrode show fairly good selectivity over some alkali, alkaline earth, transition, and heavy metal ions.     

Suppressing shape instabilities to discover the Bjerknes force instability (L)

For sufficiently strong acoustic forcing in a standing wave field, subresonant size bubbles are predicted to be repelled from the pressure antinode. Single bubble sonoluminescence (SBSL) conditions in water do not allow the observation of this instability. This study investigates the possibility that increasing the viscosity of the host liquid can preferentially suppress shape instabilities of a bubble and allow SBSL experiments to be limited by the Bjerknes force instability.     

Time-stretch oscilloscope with dual-channel differential detection front end for monitoring of 100 Gb/s return-to-zero differential quadrature phase-shift keying data

Optical performance monitoring of high-capacity networks is one of the enabling technologies of future reconfigurable optical switch networks. In such networks, rapid performance evaluation of data streams becomes challenging due to the use of advanced modulation formats and high data rates. The time-stretch enhanced recording oscilloscope offers a potential solution to monitoring high-rate data in a practical time scale. Here we demonstrate an architecture with a differential detection front end for simultaneous I/Q data monitoring of a 100 gigabits/s return-to-zero differential quadrature phase-shift keying signal. This demonstration shows the potential of this technology for rapid performance monitoring of high-rate optical data streams that employ advanced modulation formats.     

Photonic temporal integration of broadband intensity waveforms over long operation time windows

We propose and experimentally demonstrate a novel design for temporal integration of microwave and optical intensity waveforms with combined high processing speed and a long operation time window. It is based on concatenating in series a discrete-time (low-speed) photonic integrator and a high-speed analog time-limited intensity integrator. This scheme is demonstrated here using a cascaded fiber-based interferometers' system (as a passive eight-point discrete-time integrator) and an analog time-limited intensity integrator. The latter is based on temporal intensity modulation of the input waveform with a rectangular-like incoherent energy spectrum followed by linear dispersion. Using this setup, we experimentally achieve accurate time integration of intensity signals with ~36 GHz bandwidths over an operation time window of ~4 ns, corresponding to a processing time-bandwidth product of >144.     

Effect of Ge4+ and Mg2+ doping on superconductivity,fluctuation induced conductivity and interplanar coupling of TlSr2CaCu2O7−δ superconductors

Substitution of Ge⁴⁺ in place of Cu in Tl_0.85Cr_0.15Sr₂CaCu_2?xGe_xO_7?δ (x = 0–0.6) showed initial increase in zero critical temperature value, T_{c zero} from 98 K (x = 0) to 100 K (x = 0.1) and in the range of 85–86 K for x = 0.2–0.3. The slow decrease in T_{c zero} is unexpected as tetravalent Ge⁴⁺ substitution is expected to strongly reduce hole concentration in the samples and suppress T_{c zero}. Excess conductivity analyses of resistance versus temperature data based on Asmalazov–Larkin (AL) theory revealed that the substitution induced 2D-to-3D transition of fluctuation induced conductivity with the highest transition temperature, T_2D–3D observed at x = 0.1. FTIR spectroscopy analysis indicates Ge⁴⁺ substitution cause reduction in CuO₂/GeO₂ interplanar distance while our calculation based on Lawrence–Doniach model revealed highest superconducting coherence length, ξ_c(0) and interplanar coupling, J at x = 0.3. On the other hand, substitution of divalent Mg²⁺ for Ca²⁺ in (Tl_0.5Pb_0.5)(Sr_1.8Yb_0.2)(Ca_1?yMg_y)Cu₂O₇ (y = 0–1.0), which is not expected to directly vary hole concentration, surprisingly caused T_{c zero} to increase from 89.6 K (y = 0) to an optimum value of 95.9 K (y = 0.6) before decreasing with further increase in y. Excess conductivity analyses showed 2D-to-3D transition of fluctuation induced conductivity for all samples where the highest T_2D–3D was at y = 0.4. Similar calculation revealed highest values of ξ_c(0) and J also at y = 0.4. FTIR analysis of the samples indicates inequivalent Cu(1)O(2)Pb/Tl lengths and possible tilting of CuO₂ plane as a result of Mg²⁺ substitution. The increased ξ_c(0) and J as a result of the Ge⁴⁺ and Mg²⁺ substitutions are suggested to contributed to sustenance of superconductivity above 80 K in the samples.     

An investigation on surface tensions of Pb-free solder materials

Surface tensions of some Pb-free solder systems such as Ag–Bi–Sn with cross-sections Ag/Bi = 1/1, Ag/Bi = 1/2, Ag/Bi = 2/1, In–Sn–Zn with cross-sections Sn/In = 1/1, Sn/In = 1/3 and (Ag₇Cu₃)_100?x Sn_x with cross-section Ag/Cu = 7/3 are calculated from the sub-binary surface tension data using the models, such as the Muggianu, Kohler, Toop models, Butler’s equation and Chou’s General Solution Model (GSM) at 873, 923 and 1073 K, respectively. The surface tension of In–Sn–Zn increases wavily with increasing amount of Zn and it is found that the best models are the GSM for both cross-sections in question while GSM becomes the best model for (Ag₇Cu₃)_100?x Sn_x alloy in the whole experimental range. Moreover, the surface tension of (Ag₇Cu₃)_100?x Sn_x decreases slightly with increasing amount of Sn. The Muggianu, Butler and Butler models are determined as the best models for the cross-sections in the order given above for entire measurement range, respectively, and the surface tension of Ag–Bi–Sn decreases slightly with an increasing amount of Bi and Ag but increases with increasing Sn in liquid alloys.     

Parametric Study of Nonplanar Dust Acoustic Solitons in Two‐Dimensional Superthermal Dusty Plasmas

The nonlinear properties of two dimensional low‐frequency electrostatic excitations of charged dust particles (or defects) are studied in a collisionless, unmagnetized dusty plasma. A fully ionized three‐component model plasma consisting of kappa distributed electrons, Maxwellian ions, and negatively charged massive dust grains is considered. In this regard, the well known reductive perturbation technique is used to the hydrodynamical equations and the Poisson equation, obtaining the cylindrical Kadomtsev–Petviashvili (CKP) equation. A parametric investigation indicates that the structural characteristics of these nonlinear excitations (width, amplitude) are significantly affected by the plasma nonthermality as well as by the relevant plasma parameters, such as dust concentration and dust temperature. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Ultrasound-induced membrane lipid peroxidation and cell damage of Escherichia coli in the presence of non-woven TiO2 fabrics

A non-woven titanium dioxide (TiO₂) fabric was applied to disinfection by ultrasound (US) irradiation, and the disinfection efficiency and lipid peroxidation of Escherichia coli (E. coli) cell membrane were evaluated to investigate the killing process. The addition of non-woven TiO₂ fabric enhanced hydroxyl (OH) radical generation and disinfection efficiency. Judging from the disinfection experiments using glutathione or t-butanol as a radical scavenger, the OH radical played a major role in cell killing in sonodynamic disinfection with non-woven TiO₂ fabric. Moreover, to understand the detailed killing process, damage to cell membrane was also evaluated using a diphenyl-1-pyrenylphosphine (DPPP) fluorescent probe, which detects the membrane’s lipid peroxidation. The addition of non-woven TiO₂ fabric aggravated this peroxidation. This aggravation was caused by the OH radical according to an assay using a radical scavenger. From these results, it was concluded that non-woven TiO₂ fabric as a sonocatalyst promoted peroxidation of the polyunsaturated phospholipid component of the lipid membrane initially and induced a major disorder in the E. coli cell membrane under US irradiation.     

Uptake of transferrin-conjugated quantum dots in single living cells

We study the uptake and distribution of transferrin （Tf）-conjugated CdSe/CdS/ZnS quantum dots （QDs） in single living HeLa cells with both fluorescence confocal microscopy and three-dimensional （3D） reconstruction technique. By increasing the co-incubation time or the dosage of QDs-Tf, we find that the uptake of QDs-Tf bioconjugates in the cells increases correspondingly, but with different uptake rates. Additionally, the distribution of QDs-Tf, in single live HeLa cells is time dependent. To our knowledge, this is the first study on quantitatively analyzing the uptake and distribution of bioconjugated QDs in single living cells. Such QDs nanoplatform can be further modified for developing biomedical evaluation tool in cancer diagnosis and targeted drug delivery.