Toward a practical and waste-free synthesis of thioureas in water

An operationally simple and entirely green protocol for the synthesis of thiourea derivatives by the reaction of carbon disulfide with primary amines in pure water is developed. This reaction is a highly atom-economic process for production of highly pure, hindered thioureas without any catalyst and tedious work-up.     

Analysis of coir fiber acoustical characteristics

Coir fiber from coconut husk is an important agricultural waste in Malaysia. Acoustic absorption coefficient of the fiber as a porous material is studied in this paper. Two types of fiber are investigated, fresh from wet market and industrial prepared mixed with binder. Moreover two analytical models, namely; Delany–Bazley and Biot–Allard are used for analysis. Experimental measurements in impedance tube are conducted to validate the analytical outcomes. Results show that fresh coir fiber has an average absorption coefficient of 0.8 at f > 1360 Hz and 20 mm thickness. Increasing the thickness is improved the sound absorption in lower frequencies, having the same average at f > 578 Hz and 45 mm thickness. Delany–Bazley technique can be used for both types of fiber while Biot–Allard method is compensated for the industrial prepared fiber considering the binder additive. This form generally shows poor acoustical absorption in low frequencies. Inevitably, fiber has to be mixed with additives in commercial use to enhance its characteristics such as stiffness, unti-fungus and flammability. Hence other approaches such as adding air gap or perforated plate should be used to improve the acoustical properties of industrial treated coir fiber.     

Effects of Cs treatment on field emission properties of capped carbon nanotubes

Within the methodology [M. Khazaei, A.A. Farajian, Y. Kawazoe, Phys. Rev. Lett. 95 (2005) 177602] based on first-principles electronic structure calculations, the effects of Cs treatment on current emissions and emission patterns of capped carbon nanotubes are considered at low deposition densities when the nanotubes are under an electric field 0.2 V/Å. The results show that the current emission from the cap with one adsorbed Cs is 3.4 times larger than the cap without any Cs. It is 9.6 times larger in the cap with two adsorbed Cs atoms. After Cs deposition the emission patterns become asymmetric (current emission from the carbon atoms located at the topmost pentagon ring close to Cs atoms is larger than the other atomic sites). There are very few localized states on Cs atoms. Hence, although the tunneling probability of electron emission from Cs atoms is significant, there is no current from Cs atoms. In addition, the effect of Cs on work function reduction of nanotubes is explained in terms of Cs deposition densities and the surface dipole moments.     

Numerical study of magnetic nanoparticles concentration in biofluid (blood) under influence of high gradient magnetic field

Ferrofluids are widely used in pharmaceutical industries as magnetic separation tools, anti-cancer drug carriers and micro-valve applications. The purpose of the current study is to investigate the effect of a magnetic field on the volume concentration of magnetic nanoparticles of a non-Newtonian biofluid (blood) as a drug carrier. The effect of particles on the flow field is considered. The governing non-linear differential equations, concentration and Naviar-stokes are coupled with the magnetic field. To solve these equations, a finite volume based code is developed and utilized. The results show accumulation of magnetic nanoparticles near the magnetic source until it looks like a solid object. The accumulation of nanoparticles is due to the magnetic force that overcomes the fluid drag force. As the magnetic strength and size of the magnetic particles increase, the accumulation of nanoparticles increases, as well. The magnetic susceptibility of particles also affects the flow field and the contour of the concentration considerably.     

Pyrophosphate Selective Recognition in Aqueous Solution Based on Fluorescence Enhancement of a New Aluminium Complex

A novel and simple fluorescence enhancement method for selective pyrophosphate(PPi) sensing was proposed based on a 1:1 metal complex formation between bis(8-hydroxy quinoline-5-solphonat) chloride aluminum(III) (Al(QS)₂Cl), (L) and PPi in aqueous solution. The linear response range covers a concentration range of 1.6 × 10⁻⁷ to 1.0 × 10⁻⁵ mol/L of PPi and the detection limit of 2.3 × 10⁻⁸ mol/L. The association constant of L-PPi complex was calculated 2.6 × 10⁵ L/mol. L was found to show selectively and sensitively fluorescence enhancement toward PPi over than I₃^-, NO₃^-, CN⁻, CO₃²⁻, Br⁻, Cl⁻, F⁻, H₂PO4⁻ and SO₄²⁻, which was attributed to higher stability of inorganic complex between pyrophosphate and L.     

Preparation,surface state and band structure studies of SrTi(1 − x)Fe(x)O(3 − δ) (x = 0–1) perovskite-type nano structure by X-ray and ultraviolet photoelectron spectroscopy

In this report, SrTi_(1 ? x)Fe_(x)O_(3 ? δ) photocatalyst powder was synthesized by a high temperature solid state reaction method. The morphology, crystalline structures of obtained samples, was characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), and transmission electron microscopy (TEM), respectively. The electronic properties and local structure of the perovskite STF_x (0 ≤ x ≤ 1) systems have been probed by extended X-ray absorption fine structure (EXAFS) spectroscopy. The effects of iron doping level x (x = 0–1) on the crystal structure and chemical state of the STF_x have been investigated by X-ray photoelectron spectroscopy and the valence band edges for electronic band gaps were obtained for STF_x by ultraviolet photoelectron spectroscopy (UPS). A single cubic perovskite phase of STF_x oxide was successfully obtained at 1200 °C for 24 h by the solid state reaction method. The XPS results showed that the iron present in the STF_x perovskite structure is composed of a mixture of Fe³⁺ and Fe⁴⁺ (SrTi_(1 ? x)[Fe³⁺, Fe⁴⁺]_(x)O_(3 ? δ)). When the content x of iron doping was increased, the amount of Fe³⁺ and Fe⁴⁺ increased significantly and the oxygen lattice decreased on the surface of STF_x oxide. The UPS data has confirmed that with more substitution of iron, the position of the valence band decreased.     

Sensitive determination of adenosine disodium triphosphate in soil,milk, and pharmaceutical formulation by enoxacin–europium (III) fluorescence complex in solution

A new spectroflurometric method for the determination of adenosine disodium triphosphate (ATP) is developed. Fluorometric interaction between ATP and enoxacin (ENX)–Eu³⁺ complex was studied using UV–vis and fluorescence spectroscopy. Weak luminescence spectra of Eu³⁺ were enhanced after complexation with ENX at 589 nm and 614 nm upon excitation at 395 nm due to energy transfer from the ligand to the lanthanide ion. It was observed that luminescence spectrum of Eu³⁺ was strongly enhanced further at 614 nm after incorporation of ATP into the ENX–Eu³⁺ complex. Under optimal conditions, the enhancement of luminescence at 614 nm was responded linearly with the concentration of ATP. The linearity was maintained in the range of 1.5×10^?10–1.15×10^?8 M (R=0.9973) with the limit of detection (3σ) of 4.71×10^?11 M. The relative standard deviation (RSD) for 9 repeated measurements of 1×10^?9  M ATP was 1.25%. Successful determinations of ATP in soil, milk, and a pharmaceutical formulation with the proposed method were demonstrated.     

The numerical and experimental study of photon diffusion inside biological tissue using boundary integral method

In this study, the diffusion of photons in turbid media, like biological tissue has been studied. Due to scattering and absorption of photons in such media, the study of photon propagation in biological tissue is complicated. The several numerical methods have been presented to simulate the behavior of diffused photons. Recently, Boundary Integral Method (BIM) has been offered to simulate photon migration inside biological tissues. This method has advantage, e.g. lower computational time in compared with other numerical methods. In this study, the accuracy and precision of BIM compares with another numerical method like Monte Carlo technique and finite difference method, and also the calculated results obtained by BIM and Monte Carlo method evaluate with measured results. Furthermore, the effects of scattering and absorption coefficient of tissue on the measured signal are studied.     

Fragmentation of chitosan by ultrasonic irradiation

Kinetics of chitosan fragmentation by ultrasonic irradiation at frequency of 20 kHz, and the effects of experimental variables (power of ultrasound, chitosan concentration and solution temperature) on fragmentation were investigated. The kinetics studies were followed by measuring solution viscosity of the original and its fragments, and determining average number of chain scission of the fragments. The effects of ultrasonic power, chitosan concentration and solution temperature on fragmentation process were followed by viscometry and size exclusion chromatography. The chemical structure of the original chitosan and its fragments were examined by (1)H NMR spectroscopy and elemental analysis. The experimental results showed that the rate of fragmentation increased with an increase in power of ultrasound. Chain scission increased with an increase in power of ultrasound; and solution temperature, but a decrease in chitosan concentration. The chemical structure and polydispersity of the original and the fragments were nearly identical. A model based on experimental data to describe the relationship between chain scission and experimental variables (power of ultrasound; irradiation time; reduced concentration, c[eta]; and solution temperature) was proposed. It was concluded that ultrasonic irradiation is a suitable method to perform partial depolymerization and to obtain moderate macromolecules from large ones.     

Analysis and design of simple low-loss wide-angle waveguide bends

In this paper a simple low-loss planar waveguide wide-angle bend is proposed and analyzed. The waveguide bend of this work consists of a curved tapered angle such that its tapering can be adjusted for a minimum loss (maximum transmission coefficient) and small dimension of bend. The analysis is done using wide-angle BPM (beam propagation method) type Pade (4,4). The simulated results of different bends show that at the same transmission coefficient the area required for the proposed bends are smaller than those of the abrupt bends.