Molecular structure,molecular docking,thermal, spectroscopic and biological activity studies of bis‐Schiff base ligand and its metal complexes

Coordination compounds of Fe(III), Zn(II), Ni(II), Co(II), Cu(II), Cd(II) and Mn(II) ions were synthesized from the ligand [4,4′‐((((ethane‐1,2‐diylbis(oxy))bis(2,1‐phenylene))bis(methanylylidene))bis(azanylylidene))diphenol]ethane (H₂L) derived from the condensation of bisaldehyde and 4‐aminophenol. Microanalysis, magnetic susceptibility, infrared, ¹H NMR and mass spectroscopies, molar conductance, X ray powder diffraction and thermal analysis were used to confirm the structure of the synthesized chelates. According to the data obtained, the composition of the 1:1 metal ion–bis‐Schiff base ligand was found to be [M(H₂L)(H₂O)₂]Cl_n (M = Zn(II), Ni(II), Co(II), Cu(II), Cd(II) and Mn(II), n = 2; Fe(III), n = 3). Magnetic susceptibility measurements and reflectance spectra suggested an octahedral geometry for the complexes. Central metals ions and bis‐Schiff base coordinated together via O2 and N2 donor sites which as evident from infrared spectra. The Gaussian09 program was applied to optimize the structural formula for the investigated Schiff base ligand. The energy gaps and other important theoretical parameters were calculated applying the DFT/B3LYP method. Molecular docking using AutoDock tools was utilized to explain the experimental behaviour of the Schiff base ligand towards proteins of Bacillus subtilis (5 h67), Escherichia coli (3 t88), Proteus vulgaris (5i39) and Staphylococcus aureus (3ty7) microorganisms through theoretical calculations. The docked protein receptors were investigated and the energies of hydrogen bonding were calculated. These complexes were then subjected to in vitro antibacterial studies against several organisms, both Gram negative (P. vulgaris and E. coli) and Gram positive (S. pyogones and B. subtilis). The ligand and metal complexes exhibited good microbial activity against the Gram‐positive and Gram‐negative bacteria.     

Spectrophotometric Determination of Pyrithioxin in Pharmaceutical Preparations

Rapid direct and induced difference spectrophotometric methods for determination of pyrithioxin in single dosage forms (tablets and syrups) are reported. The direct methods depend upon measurement of the absorbance of pyrithioxin in different media at λ_max i-e at 296 nm in 0.1 M hydrochloric acid, at 328 nm in citric acid-phosphate buffer of pH 7 and at 314 nm in 0.1 M sodium hydroxide. The mean percentage recovery of the authentic samples were 100.55±0.43, 101.21±0.58 and 100.29±0.64 respectively (P=0.05). The absorbance difference methods are based upon either measurement of the difference between the acid and the alkaline solutions i-e. Δ A (Alk-Acid) at 318 nm with an accuracy of 100.72±0.88 or the absorbance difference between the acid and neutral solutions i-e Δ A (pH 7-acid) at 328 nm with an accuracy of 100.31±0.68.     

Entire large solutions of semilinear equations involving the fractional Laplacian

We investigate the existence and nonexistence of positive entire large solutions of a class of semilinear equations involving the fractional Laplacian. Sharp lower and upper bounds of the minimal solution, if it exists, are also given.     

Determination of the inhibitory effect of green tea extract on glucose‐6‐phosphate dehydrogenase based on multilayer capillary enzyme microreactor

Natural herbal medicines are an important source of enzyme inhibitors for the discovery of new drugs. A number of natural extracts such as green tea have been used in prevention and treatment of diseases due to their low‐cost, low toxicity and good performance. The present study reports an online assay of the activity and inhibition of the green tea extract of the Glucose 6‐phosphate dehydrogenase (G6PDH) enzyme using multilayer capillary electrophoresis based immobilized enzyme microreactors (CE‐IMERs). The multilayer CE‐IMERs were produced with layer‐by‐layer electrostatic assembly, which can easily enhance the enzyme loading capacity of the microreactor. The activity of the G6PDH enzyme was determined and the enzyme inhibition by the inhibitors from green tea extract was investigated using online assay of the multilayer CE‐IMERs. The Michaelis constant (K_m) of the enzyme, the IC₅₀ and K_i values of the inhibitors were achieved and found to agree with those obtained using offline assays. The results show a competitive inhibition of green tea extract on the G6PDH enzyme. The present study provides an efficient and easy‐to‐operate approach for determining G6PDH enzyme reaction and the inhibition of green tea extract, which may be beneficial in research and the development of natural herbal medicines. Copyright © 2016 John Wiley & Sons, Ltd.     

Comparative study between two fabricated potentiometric sensors to enhance selectivity towards ferrous ions

Electroanalytical methods are highly selective for measuring electrical quantities including the charge, potential and current with their relation to chemical parameters. They are widely applied in various fields such as biochemical analysis, industrial quality control and environmental monitoring. They have many advantages over other techniques in that they are not time consuming and are specific for certain oxidation states of certain elements which give these techniques high selectivity and sensitivity features. This paper is based on two parts: the first part describes the fabrication of screen‐printed electrodes (SPEs) modified with methyl red as electroactive material, while second part describes the preparation and characterization of Fe(II)–methyl red complex using various spectroscopic tools, the complex being used for the construction of carbon paste electrodes (CPEs). The two proposed electrodes were successfully applied for the determination of Fe(II) in water and pharmaceutical (pharovit) samples. The electrodes under investigation show potentiometric response for Fe(II) in the concentration range 8.0 × 10^?7–1.0 × 10^?2 and 5.0 × 10^?7–1.0 × 10^?2 M at 25°C for SPE and CPE, respectively, and the electrode response is independent of pH in the range 1.5–7.0. These sensors show Nernstian slopes of 29.1 ± 0.2 and 29.7 ± 0.16 mV decade^?1 with detection limit values of 8.0 × 10^?7 and 5.0 × 10^?7 M for SPE and CPE, respectively. These electrodes show fast response time of 6 and 4 s and exhibit a lifetime of 100 and 30 days for SPE and CPE, respectively. The mechanism of chemical reaction between modifier and Fe(II) on the SPE surface was studied using infrared spectra, scanning electron microscopy and energy‐dispersive X‐ray analysis. The proposed potentiometric method was validated according to the IUPAC recommendations. The results obtained using the proposed sensors were comparable with those obtained with inductively coupled plasma analysis.     

Polymer complexes. LXXVI. Synthesis,characterization, CT‐DNA binding,molecular docking and thermal studies of sulfoxine polymer complexes

Novel polymer complexes of 8‐hydroxyquinoline‐5‐sulfonic acid hydrate ( H ₂ L ) with Cu²⁺, Co²⁺ and Ni²⁺ chloride were prepared and characterized. Microanalysis, magnetic susceptibility, IR spectra, electron spin resonance, mass spectra, X‐ray, molar conductance, thermal, and UV–Vis spectra studies have been used to confirm the structure of the prepared polymer complexes. The molecular and electronic structures of the hydrogen bond conformers for ligand ( H ₂ L ) were optimized theoretically and the quantum chemical parameters were calculated. On the basis of elemental and IR data, the chemical structure of metal chelates commensurate that the tri‐dentate (H₂L) coordinate to metal chlorides through oxygen atom of phenolic OH and oxygen atom of SO₃‐H group by replacing H atoms and nitrogen of the quinoline ring. The magnetic studies suggested the octahedral geometrical structure for all produced polymer complexes with general formula {[ML (OH₂)₃] .xH₂O}_n (M = Cu²⁺, x = 1.; Co²⁺, x = 2 and Ni²⁺, x = 2) in molar ratio (1:1). Coats–Redfern and Horowitz–Metzger methods have been used for calculating the activation thermodynamic parameters of the thermal decomposition for H ₂ L and its polymer complexes. The interaction between H ₂ L and its transition metal complexes with the calf thymus DNA (CT‐DNA) was determined by UV–Vis spectra. Binding efficiency between H ₂ L with the receptors of the prostate cancer (PDB code 2Q7L Hormone) and the breast cancer (PDB code 1JNX Gene regulation) was studied by molecular docking. The inhibition behaviour of H ₂ L against the corrosion of carbon steel / HCl (2 M) solution was studied by weight loss, Tafel polarisation, electrochemical impedance spectroscopy (EIS) and electrochemical frequency modulation (EFM) techniques. The adsorption isotherm was found to be Friendlish isotherm. The morphology of inhibited carbon steel? s surface was studied using scanning electron microscope (SEM) and energy dispersive X‐ray spectroscopy (EDS).     

Hydrothermal synthesis,thermal decomposition and optical properties of Fe2F5(H2O)(Htaz)(taz)(Hdma)

Crystal structure of Fe₂F₅(H₂O)(Htaz)(taz)(Hdma) which crystallizes in the triclinic system space group $\text{P}\overline{1}$ with unit cell parameters a = 8.8392(5) Å, b = 9.1948(5) Å, c = 9.5877(5) Å, α = 82.070(3)°, β = 63.699(3)°, γ = 89.202(3)°, Z = 2, and V = 690.91(7) ų, was synthesized under hydrothermal conditions at 393 K for 72 h, by a mixture of FeF₂/FeF₃, 1,2,4-triazole molecule (Htaz), and hydrofluoric acid solution (HF 4%) in dimethylformamide solvent (DMF). The main feature of this material is the coexistence of two oxidation states for iron atoms (Fe²⁺, Fe³⁺) in the unit cell, which associate by opposite fluorine corners of FeF₅N and FeF₂N₄ octahedra, and/or triazole molecule which originates the 2D produces material. The structure determination, performed from single crystal X-ray diffraction data, lead to the R₁/_WR₂ reliability factors 0.031/0.087. Thermal stability studies (TG/DTG/DTA) show that the decomposition provides in the temperature range 473–773 K and no mass loss was detected before 473 K. Mass spectrometry (MS) has been used. The optical absorption of the solid was measured at the corresponding λ_max using UV–vis diffuse-reflectance spectrum.