Polylactic Acid Film Coated with Electrospun Gelatin/Chitosan Nanofibers Containing Betel Leaf Ethanolic Extract: Properties,Bioactivities, and Use for Shelf-Life Extension of Tilapia Slices

Gelatin/chitosan solutions incorporated with betel leaf ethanolic extract (BLEE) at varying concentrations were electrospun on polylactic acid (PLA) films. Nanofibers with different morphologies, as indicated by scanning electron microscopy (SEM), were formed after solutions of gelatin/chitosan with and without BLEE were electrospun on PLA films at a constant voltage (25 kV) and a feed rate of 0.4 mL/h. Beaded gelatin/chitosan nanofibers (GC/NF) were found, particularly when high concentrations of BLEE were encapsulated. PLA films coated with GC/NF, and with BLEE added, showed antioxidant and antibacterial activities, which were augmented by increasing BLEE concentrations. Lower water vapor permeability and enhanced mechanical properties were achieved for GC/NF-coated PLA film (p < 0.05). Microbial growth and lipid oxidation of Nile tilapia slices packaged in PLA film coated with GC/NF containing 2% BLEE were more retarded than those packaged in low-density polyethylene (LDPE) bags over refrigerated storage of 12 days. Based on microbial limits, the shelf-life was escalated to 9 days, while the control had a shelf-life of 3 days. Therefore, such a novel film/bag could be a promising active packaging for foods.     

Characterization of structural modifications in poly-tetra-fluoroethylene induced by electron beam irradiation

The effects of electron beam irradiation doses on the poly-tetra-fluoroethylene (PTFE) have been studied. Several techniques, such as X-ray diffraction (XRD), differential scanning calorimetry (DSC), mechanical properties and Fourier transform infrared spectroscopy (FTIR) were applied to characterize the PTFE samples and to study the radiation effects on the crystal structure of the polymer.The irradiation dose up to 150 kGy showed an increase in the crystallinity degree of PTFE, which has been observed and confirmed during the DSC and XRD measurements. The increase in crystallinity was attributed to the scissions of the chain in the amorphous region. Moreover, the number-average molecular weights were estimated from the heat of crystallization measured by DSC technique. The results indicated that the molecular weights were decreased by increasing the heat of crystallization due to irradiation with doses up to 150 kGy. Radiation resistance of the irradiated and non-irradiated PTFE was investigated during its mechanical properties at room temperature. The dose at half value of the elongation at break is about 3.10 kGy while the dose at half value of the tensile strength is about 1.70 kGy.     

Capillary gas chromatography of amines with ammonia as carrier gas

The use of ammonia as a carrier gas for the chromatography of aliphatic and aromatic amines has been investigated. As compared to nitrogen, ammonia gave drastically improved peak symmetry and lower capacity factors (k′) for primary and secondary amines on polar (Polyethylene glycol) and medium Polar (methylphenylcyanopropylsilicone) stationary Phases. The effect of ammonia was more Pronounced at low column temperatures. Considerably better detection limits of primary and secondary amines were obtained with ammonia as carrier gas than with nitrogen. No detrimental effects of using ammonia were observed on the gas chromatograph or on the columns over a period of about one year.     

Studies of interactions between silane coupling agents and cellulose fibers with liquid and solid-state NMR

The hydrolysis of three alkoxy-silane coupling agents, gamma-methacryloxypropyl trimethoxy silane (MPS), gamma-aminopropyl triethoxy silane (APS), and gamma-diethylenetriaminopropyl trimethoxy silane (TAS), was carried out in ethanol/water solutions (80/20 w/w) at different pH values and followed by 1H, 13C and 29Si NMR spectroscopy. Acidic media were found to stabilize the hydrolyzed forms. As expected, the formation of silanol groups was followed by their self-condensation to generate oligomeric structures, yielding, ultimately, solid homopolycondensated structures, as analyzed by 29Si and 13C high-resolution solid-state NMR. Hydrolyzed MPS in acidic media was then successfully adsorbed onto a cellulose surface and the ensuing substrates submitted to thermal treatment at 110-120 degrees C under reduced pressure, in order to create covalent bonds between cellulose and the coupling agent.     

Thermodynamic properties of the ternary system {yNH4Cl + (1 − y)MgCl2} (aq) at 298.15 K

The mixture {yNH₄Cl + (1 − y)MgCl₂} (aq) has been studied using the hygrometric method at the temperature 298.15 K. The water activities are measured at total molalities from 0.30 mol kg⁻¹ up to saturation for different ionic strength fractions y of NH₄Cl with y = 0.20, 0.50 and 0.80. The obtained data allow the deduction of osmotic coefficients. Experimental results are compared with the calculations using the models of Zdanovskii–Stokes–Robinson, Kusik and Meissner, Robinson and Stokes, Lietzke and Stoughton, Reilly–Wood and Robinson and Pitzer. Thermodynamic properties have been modeled using the Pitzer ion-interaction model with inclusion of an ionic strength dependence of the third virial coefficient for the binary systems. From these measurements and the obtained binary parameters β⁽⁰⁾, β⁽¹⁾, C⁽⁰⁾ and C⁽¹⁾, the mixing ionic parameters θNH₄Mg${\theta }_{\text{N}{\text{H}}_4\text{Mg}}$ and ψNH₄MgCl${\psi }_{\text{N}{\text{H}}_4\text{MgCl}}$ are determined by the standard Pitzer model. The results show that a good accuracy is obtained with the standard Pitzer model using extended binary parameters. The parameters θNH₄Mg${\theta }_{\text{N}{\text{H}}_4\text{Mg}}$ and ψNH₄MgCl${\psi }_{\text{N}{\text{H}}_4\text{MgCl}}$ were used for evaluation of activity coefficients in the mixture. The excess Gibbs energy is also determined.     

Synthesis and antiviral screening of some novel pyridazine and triazolopyridazine nucleosides

Some novel cyclic and acyclic pyridazine and triazolopyridazine nucleoside derivatives were prepared. Some of the prepared products were selected and tested for antiviral activity against herpes simplex virus type‐1 (HSV‐1) and hepatitis‐A virus (HAV, MBB‐cell culture adapted strain). Plaque reduction infectivity assay was used to determine virus count reduction as a result of treatment with test compounds. Compound 15 showed the highest effect on the HAV than the other tested compounds. © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:274–282, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20296     

Tri‐Chain Hydrocarbon Surfactants as Designed Micellar Modifiers for Supercritical CO2

Getting their feet wet : Low‐cost hydrocarbon surfactants act as fluid modifiers for supercritical carbon dioxide (scCO₂). Increased terminal branching of the surfactant chains aids micelle formation (see middle picture: CO₂ green), and more chains allows water to be incorporated (right, blue).

     

Epoxy-amine multimethacrylic prepolymers,kinetic and structural studies

Epoxy-amine methacrylated prepolymers are prepared in a 1-step synthesis by the reaction of Bisphenol A diglycidyl ether, glycidyl methacrylate, and different diamines. The adaptation of these reactions to production processes with a reduced reaction time requires a kinetic control and the use of efficient catalysts. The comparative kinetic treatment of the epoxy-amine reaction in the frame of Horie's and Rozenberg's kinetic schemes have been made. Cases where an efficient acid catalyst is used are also examined. Structural studies of these reactions established the occurrence of a Michael amine/double bond addition, when some amines are used. © 1995 John Wiley & Sons, Inc.     

C2-symmetric diphosphinite ligands derived from carbohydrates. The strong influence of remote stereocenters on asymmetric rhodium-catalyzed hydrogenation

Modular ligands of C(2) symmetry (13a-e, 14a,b,d, and ent-9), systematically modified at positions 2 and 5, were easily prepared from d-glucosamine, D-glucitol, and tartaric acid, respectively. The application of these ligands in the rhodium-catalyzed hydrogenation of methyl acetamidoacrylate, methyl acetamidocinnamate, and dimethyl itaconate shows that both the configuration and the substituents at positions 2 and 5 of the tetrahydrofuran backbone have a strong influence on the enantioselectivty of the processes.