Quartz crystal microbalance (QCM) in high-pressure carbon dioxide (CO2): experimental aspects of QCM theory and CO2 adsorption

The quartz crystal microbalance (QCM) technique has been developed into a powerful tool for the study of solid-fluid interfaces. This study focuses on the applications of QCM in high-pressure carbon dioxide (CO2) systems. Frequency responses of six QCM crystals with different electrode materials (silver or gold) and roughness values were determined in helium, nitrogen, and carbon dioxide at 35-40 degrees C and at elevated pressures up to 3200 psi. The goal is to experimentally examine the applicability of the traditional QCM theory in high-pressure systems and determine the adsorption of CO2 on the metal surfaces. A new QCM calculation approach was formulated to consider the surface roughness contribution to the frequency shift. It was found that the frequency-roughness correlation factor, Cr, in the new model was critical to the accurate calculation of mass changes on the crystal surface. Experiments and calculations demonstrated that the adsorption (or condensation) of gaseous and supercritical CO2 onto the silver and gold surfaces was as high as 3.6 microg cm(-2) at 40 degrees C when the CO2 densities are lower than 0.85 g cm(-3). The utilization of QCM crystals with different roughness in determining the adsorption of CO2 is also discussed.     

Synthesis, Characterization, Luminescence, and Electrochemistry of New Tetranuclear Gold(I) Amidinate Clusters: Au4[PhNC(Ph)NPh]4, Au4[PhNC(CH3)NPh]4, and Au4[ArNC(H)NAr]4

The syntheses and the X-ray structures of the tetranuclear gold(I) benzamidinate, Au₄[PhNC(Ph)NPh]₄, and the tetranuclear gold(I) acetamidinate, Au₄[PhNC(CH₃)NPh]₄, clusters are reported. The clusters are produced by the reaction of the sodium salt of an amidine ligand with the gold precursor Au(THT)Cl in a (1:1) stoichiometry. The average Au...Au distance between adjacent Au(I) atoms is ∼2.9 ?, typical of compounds having an aurophilic interaction. The four gold atoms are arranged in a square (Au...Au...Au... = 88–91°) in the acetamidinate and in a distorted square (Au...Au...Au... = 82–97°) in the benzamidinate derivative. Electrochemical oxidation of the tetranuclear complex Au₄[PhNC(Ph)NPh]₄ show three reversible waves at 0.87, 1.19, 1.42 V vs. Ag/AgCl at a scan rate of 100 mV/s in CH₂Cl₂ similar to the three reversible waves seen before from the tetranuclear complexes Au₄[ArNC(H)NAr]₄, Ar = C₆H₄-4-OMe, Ar = C₆H₄-4-Me, and Ar = C₆H₃-3,5-Cl. A summary of the chemistry of the tetranuclear Au(I) amidinate complexes Au₄[ArNC(H)NAr]₄, Ar = C₆H₄-4-OMe, C₆H₃-3,5-Cl, C₆H₄-4-Me, C₆H₄-3-CF₃, C₆F₅, C₁₀H₇ also is presented. The tetranuclear clusters Au₄[ArNC(H)NAr]₄, Ar = C₆H₄-4-OMe, Ar = C₆H₄-3-CF₃, Ar = C₆H₄-4-Me and Ar = C₆H₄-3,5-Cl are the first tetranuclear gold(I) cluster species from group 11 elements to show fluorescence at room temperature. The lifetimes of the naphthyl and trifluoromethylphenyl complexes are in the millisecond range indicating phosphorescent processes. Recently it has been shown that Au₄[ArNC(H)NAr]₄ are very effective catalysts upon calcination for room temperature CO oxidation. Congratulations to Dieter Fenske, a superb synthetic chemist with exceptional talents in cluster chemistry, on the occasion of his 65th birthday.     

Three-stage sequential extraction procedure for metal partitioning in polluted soils and sediments

The sequential extraction procedure proposed by the Standard, Measurements and Testing program "SM&T" of the European Union has been applied to evaluate the amounts of Cr, Cu, Mn, Ni, Pb and Zn, extracted at each stage and indirectly their mobility and bioavailability in soil and sediment samples from a polluted area. Analysis of the extracts was carried out by flame atomic absorption spectrometry (FAAS). No significant matrix interferences were found except for Cr in the acetic acid and hydroxylammonium chloride extracts, which required determination by the standard additions method. Both of soils and sediments studied show similar partitioning of Mn, Ni, Cu and Cr. Mn and Ni can be considered to have significant component bound to the acido-soluble fraction, whereas, Cr and Cu occur largely in the organic and residual phases. The partitioning of Pb and Zn was different between soil and sediment. In terms of mobility and bioavailability, in soils, Ni and Mn can be regarded as moderately available followed by a lower availability of Pb while Cu, Zn and Cr have a very limited availability. In sediments, a higher availability (short-medium term) of Mn and Zn was presumed followed by a lower availability of Ni and Pb, whereas, Cu and Cr, occurring largely in the organic and residual phases, were of very limited availability.     

Reactions with heterocyclic amidines. VI. Synthesis and chemistry of pyrazol-5-yl,and 1,2,4-triazol-5-ylhydrazonyl chlorides

The 4-bromo-3-phenylpyrazol-5-ylhydrazonyl chlorides (Ia,b) and 1,2,4-triazol-5-ylhydrazonyl chlorides (IIa,b) were prepared via coupling of diazotized 4-bromo-3-phenyl-5-aminopyrazole (III) and 5-amino-1,2,4-triazole (IV) with α-chloro derivatives of acetylacetone and of ethyl aceto-acetate. Compounds Ia and IIa,b were utilised for the synthesis of several new heterocyclic derivatives.     

Aqueous polymerization of acrylonitrile by ascorbic acid–peroxodisulfate redox system

The polymerization of acrylonitrile initiated by an ascorbic acid–peroxodisulfate redox system was studied in an aqueous solution at 35°C in the presence of air. Molecular oxygen was found to have no effect on the polymerization reaction. An increase in ionic strength slightly increased the rate. The overall rate of polymerization, R_p, showed a square dependence on [monomer] and a half-order dependence on [peroxodisulfate]. A first-order dependence on [ascorbic acid] at low concentrations (<3.0 × 10^?3 mol L^?1) followed by a decrease in R_p at higher concentrations of ascorbic acid (>3.0 × 10^?3 mol L^?1) was also noted. R_p remained unchanged up to 40°C and showed a decline thereafter. Addition of catalytic amounts of cupric ions decreased the rate whereas ferric ions were found to increase the rate. Added sulfuric acid in the range (6.0?50.0) × 10^?5 mol L^?1 decreased the R_p.     

Method for Visible Light‐Induced Photocatalytic Degradation of Methylparaben in Water Using Nanostructured Ag/AgBr@m‐WO3

An efficient method of photocatalytic degradation of methylparaben in water using Ag nanoparticles (NPs) loaded AgBr‐mesoporous‐WO₃ composite photocatalyst (Ag/AgBr@m‐WO₃), under visible light is presented. In this process, quantification of methylparaben in water was carried out by high‐performance liquid chromatography (HPLC) and the HPLC results showed a significant reduction of methylparaben in water due to the enhanced of photocatalytic degradation efficiency of Ag/AgBr@m‐WO₃. For the material synthesis, highly ordered mesoporous‐WO₃ (m‐WO₃) was initially synthesized by sol–gel method and AgBr nanoparticles (NPs) were subsequently introduced in the pores of m‐WO₃, and finally, the Ag nanoparticles were introduced by light irradiation. The enhanced photocatalytic degradation of methylparaben in water is attributed to the formation of surface plasmonic resonance (SPR) due to the introduction of Ag NPs on the surface of the catalyst. Also, the formation of heterojunction between AgBr and mesoporous‐WO₃ in Ag/AgBr@m‐WO₃ significantly inhibited the recombination of light‐induced electron‐hole pairs in the semiconductor composite. The morphological and optical characterizations of the synthesized photocatalysts (Ag/AgBr@m‐WO₃) were carried out using SEM, TEM, XDR, N₂ adsorption–desorption, UV‐VIS diffuse reflectance spectroscopy (DRS). Also, the photocatalytic studies using radical scavengers were carried out and the results indicated that ${\text{O}}_2^{·-}$ is the main reactive species.     

Tethered 2 + 2 + 2 cycloaddition reactions of cobalt-cycloheptyne complexes

Cycloheptyne-dicobalt hexacarbonyl complexes, substituted by propargylic ether functions, undergo 2 + 2 + 2 cycloaddition reactions with alkynes to give tricyclic benzocycloheptanes; an all-intramolecular version of this transformation is also possible.     

Cinnamolid‐3β‐ol hemihydrate and 3β‐hydroxycinnamolide acetate,two drimanolide‐class sesquiterpene lactones from Warburgia ugandensis

3β‐Hydr­oxy‐7‐drimen‐12,11‐olide hemihydrate, C₁₅H₂₂O₃·0.5H₂O, (I), has two sesquiterpene mol­ecules and one water mol­ecule in the asymmetric unit. The OH groups of both mol­ecules and both H atoms of the water mol­ecule are involved in near‐linear inter­molecular hydrogen bonds, having O⋯O distances in the range 2.632 (3)–2.791 (2) Å. 3β‐Acet­oxy‐7‐drimen‐12,11‐olide, C₁₇H₂₄O₄, (II), has its ring system in very nearly the same conformation as the two mol­ecules of (I).     

Synthesis, characterization and biological activity of some transition metals with Schiff base derived from 2-thiophene carboxaldehyde and aminobenzoic acid

Metal complexes of Schiff base derived from 2-thiophene carboxaldehyde and 2-aminobenzoic acid (HL) are reported and characterized based on elemental analyses, IR, 1H NMR, solid reflectance, magnetic moment, molar conductance and thermal analysis (TGA). The ligand dissociation as well as the metal-ligand stability constants were calculated pH metrically at 25 degrees C and ionic strength mu=0.1 (1M NaCl). The complexes are found to have the formulae [M(HL)2](X)n.yH2O (where M=Fe(III) (X=Cl, n=3, y=3), Co(II) (X=Cl, n=2, y=1.5), Ni(II) (X=Cl, n=2, y=1) and UO2(II) (X=NO3, n=2, y=0)) and [M(L)2] (where M=Cu(II) (X=Cl) and Zn(II) (X=AcO)). The molar conductance data reveal that Fe(III) and Co(II), Ni(II) and UO2(II) chelates are ionic in nature and are of the type 3:1 and 2:1 electrolytes, respectively, while Cu(II) and Zn(II) complexes are non-electrolytes. IR spectra show that HL is coordinated to the metal ions in a terdentate manner with ONS donor sites of the carboxylate O, azomethine N and thiophene S. From the magnetic and solid reflectance spectra, it is found that the geometrical structure of these complexes are octahedral. The thermal behaviour of these chelates shows that the hydrated complexes losses water molecules of hydration in the first step followed immediately by decomposition of the anions and ligand molecules in the subsequent steps. The activation thermodynamic parameters, such as, E*, DeltaH*, DeltaS* and DeltaG* are calculated from the DrTG curves using Coats-Redfern method. The synthesized ligands, in comparison to their metal complexes also were screened for their antibacterial activity against bacterial species, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus pyogones and Fungi (Candida). The activity data show that the metal complexes to be more potent/antibacterial than the parent Schiff base ligand against one or more bacterial species.     

Synthesis, crystal structure and mono-dimensional thallium ion conduction of TlFe0.22Al0.78As2O7

A new solid solution TlFe_0.22Al_0.78As₂O₇ has been synthesized by a solid-state reaction. The structure of the title compound has been determined from a single-crystal X-ray diffraction and refined to final values of the reliability factors: R(F²)=0.030 and wR(F²)=0.081 for 1343 independent reflections with I>2σ(I). It crystallizes in the triclinic space group P-1, with a=6.296(2) Å, b=6.397(2) Å, c=8.242(2) Å, α=96.74(2)°, β=103.78(2)°, γ=102.99(3)°, V=309.0(2) Å³ and Z=2. The structure can be described as a three-dimensional framework containing (Fe/Al)O₆ octahedra connected through As₂O₇ groups. The metallic units and diarsenate groups share oxygen corners to form a three-dimensional framework with interconnected tunnels parallel to the a, b and c directions, where Tl⁺ cations are located. The ionic conductivity measurements are performed on pellets of the polycrystalline powder. At 683 K, The conductivity value is 5.23×10⁻⁶ S cm⁻¹ and the ionic jump activation energy is 0.656 eV. The bond valence analysis reveals that the ionic conductivity is ensured by Tl⁺ along the [001] direction.