Thioimidazolate versus pyrazolate-zinc(II)-bound hydroxo complex as structural model for the active site of hydrolytic enzyme: the crystal structure of the inclusion complex TtZn–O–C6H4–p-NO2, Tt?=?hydrotris(N-xylyl-2-thioimidazolyl)borate

The reaction of the tripod ligand hydrotris(N-(2-methylphenyl)-2-thioimidazol-1-yl)borate, Tt with zinc(II) chloride yielded the chloro complex [TtZn–Cl] 1. The hydrolytic reactivity of its hydroxo complex [TtZn–(μ-OH)ZnTt]Cl 2 towards p-nitrophenyl acetate was hampered due to the formation of the stable phenolate complex [TtZn–O–Ar–p-NO₂] 3 as a product inhibition. The X-ray structure analysis of complex 3 was determined and showed that its Zn[S₃O] coordination sphere includes three thione donors from the ligand Tt and one oxygen donor from the hydrolysed product p-nitrophenolate in an ideally tetrahedral arrangement around the zinc(II) centre.     

Counter-flow electrokinetic supercharging for the determination of non-steroidal anti-inflammatory drugs in water samples

Electrokinetic supercharging (EKS) has been used in the last few years as a powerful tool for separation and on-line preconcentration of different types of analytes. We have developed a valuable modification for EKS system, namely counter-flow EKS (CF-EKS) and applied it for the separation and on-line preconcentration of seven non-steroidal anti-inflammatory drugs (NSAIDs) in water samples. In CF-EKS, a hydrodynamic counter-flow is applied during electrokinetic injection of the analytes within the EKS system. This counter-flow minimises the introduction of the sample matrix into the capillary, allowing longer injections to be performed. Careful choice of the optimum counter-flow as well as the optimum injection voltage allowed the sensitivity to be enhanced by 11,800-fold, giving limits of detection (LODs) of 10.7–47.0 ng/L for the selected NSAIDs. The developed method was validated and then applied for the determination of the studied NSAIDs in drinking water as well as wastewater samples from Hobart city.     

Isolation of tumor cells using size and deformation

The isolation and analysis of circulating tumor cells (CTCs) from blood are the subject of intense research. Although tests to detect metastasis on a molecular level are available, progress has been hampered by a lack of tumor-specific markers and predictable DNA abnormalities. The main challenge in this endeavor is the small number of available cells of interest, 1–2 per mL in whole blood. We have designed a micromachined device to fractionate whole blood using physical means to enrich for and/or isolate rare cells from peripheral circulation. It has arrays of four successively narrower channels, each consisting of a two-dimensional array of columns. Current devices have channels ranging in width from 20 to 5 μm, and in depth from 20 to 5 μm. Several optimizations resulting in the fabrication of a total of 10 derivative devices have been carried out; only two types are used in this study. Both have increasingly narrower gap widths between the columns along the flow axis with 20, 15, 10, and 5 μm spacing all on one device. The first 20 μm wide segment disperses the cell suspension and creates an evenly distributed flow over the entire device, whereas the others were designed to retain increasingly smaller cells. The channel depth is constant across the entire device, the first type was 10 μm deep and the second type is 20 μm deep. When cells from each of eight tumor cell lines were loaded into the device, all cancerous cells were isolated. In mixing experiments using human whole blood, we were able to fractionate cancer cells without interference from the blood cells. Additionally, either intact cells, or DNA, could be extracted for molecular analysis. The ultimate goal of this work is to characterize the cells on the molecular level to provide non-invasive methods to monitor patients, stage disease, and assess treatment efficacy. Furthermore, this work will use gene expression profiles to gain insights into metastasis.     

Photoinduced processes of newly synthesized bisferrocene- and bisfullerene-substituted tetrads with a triphenylamine central block

Photoinduced electron transfer processes of two newly synthesized tetrads with a triphenylamine (TPA) as central building block, to which bisfullerenes (C₆₀) and bisferrocenes (Fc) are covalently connected, have been studied. One of them has a TPA linked with one C₆₀ moiety and two ferrocene moieties C₆₀-TPA-(Fc)₂ and another tetrad has a TPA linked with two C₆₀ moieties and one ferrocene unit (C₆₀)₂-TPA-Fc. The photophysical properties of (C₆₀)_m-TPA-(Fc)_n have been investigated by applying the picosecond time-resolved fluorescence and nanosecond transient absorption techniques in both polar and nonpolar solvents. The charge separation process via the excited singlet state of the C₆₀ moiety of the C₆₀-TPA-(Fc)₂ is more efficient than that of the (C₆₀)₂-TPA-Fc. It is found that the ratio of Fc-donor to C₆₀-acceptor affects charge separation efficiency via the excited singlet state of the C₆₀ moiety.     

Electrochemical and solid-phase synthetic modification of glassy carbon electrodes with dihydroxybenzene compounds and the electrocatalytic oxidation of NADH

We report the preparation, using electrochemical and solid-phase synthesis, and characterisation of a 26 member library of 13 dihydroxybenzene derivatives covalently attached to glassy carbon through ethylenediamine (EDA) and C₆H₄CH₂NH linkers. First, Boc-protected EDA or Boc–NHCH₂C₆H₄ were electrochemically attached to the GC surface. After Boc-deprotection, dimethoxybenzoyl chlorides were coupled to the EDA and C₆H₄CH₂NH linkers using solid-phase synthesis followed by deprotection of the methoxy groups to give the corresponding dihydroxybenzene compounds. Surface coverage and electrochemical parameters of the dihydroxybenzene modified electrodes were evaluated in parallel using cyclic voltammetry. The mid-peak potentials, E_mp, and surface coverages for the 13 dihydroxybenzene derivatives were found to be independent of the choice of linker. The mid-peak potentials of the immobilised dihydroxybenzene derivatives varied between 0.0 and 260 mV vs. SCE and their surface coverages varied between 0.07 and 1.1 nmol cm^− 2, depending on the pattern of substitution of the dihydroxybenzene ring. The electrocatalytic activities of the library were evaluated for mediation of NADH oxidation, and the ortho-dihydroxybenzene derivatives were found to have higher catalytic activity.     

Impedance spectroscopy and conductometric biosensing for probing catalase reaction with cyanide as ligand and inhibitor

In this work, a new biosensor was prepared through immobilization of bovine liver catalase in a photoreticulated poly (vinyl alcohol) membrane at the surface of a conductometric transducer. This biosensor was used to study the kinetics of catalase–H₂0₂ reaction and its inhibition by cyanide. Immobilized catalase exhibited a Michaelis–Menten behaviour at low H₂0₂ concentrations (< 100 mM) with apparent constant K_M^app = 84 ± 3 mM and maximal initial velocity V_M^app = 13.4 μS min^? 1. Inhibition by cyanide was found to be non-competitive and inhibition binding constant K_i was 13.9 ± 0.3 μM. The decrease of the biosensor response by increasing cyanide concentration was linear up to 50 μM, with a cyanide detection limit of 6 μM. In parallel, electrochemical characteristics of the catalase/PVA biomembrane and its interaction with cyanide were studied by cyclic voltammetry and impedance spectroscopy. Addition of the biomembrane onto the gold electrodes induced a significant increase of the interfacial polarization resistance R_P. On the contrary, cyanide binding resulted in a decrease of Rp proportional to KCN concentration in the 4 to 50 μM range. Inhibition coefficient I₅₀ calculated by this powerful label-free and substrate-free technique (24.3 μM) was in good agreement with that determined from the substrate-dependent conductometric biosensor (24.9 μM).     

Gamma-radiation combined with tricycloazole to protect tempera paintings in ancient Egyptian tombs (Nile Delta,Lower Egypt)

In order to comprehensively understanding the metabolism process of fluvastatin, the stable isotope-labeled (3R, 5S)-fluvastatin and (3S, 5R)-fluvastatin were required. Both of (3R, 5S)-fluvastatin and (3S, 5R)-fluvastatin were synthesized via a seven steps procedure starting from aniline and [²H₆] 2-bromopropane. Two versions of deuterium labeled compound revealed over 98% deuterium enrichment, using as an internal standard.

     

Selective uranium adsorption using modified acrylamide resins

Polymeric matrices composed of N,N′-Methylenebis(acrylamide)/glycidyl methacrylate was prepared and modified producing two resins (GMA/MBA/OH and GMA/MBA/SO₃H). The adsorption of U(VI) ions onto the modified acrylamide resins was studied from synthetic and granite samples. For better understanding around the uranium mineralization and the rock-forming minerals of the hosted granitic rocks, to facilitate the choice of the appropriate ore-processing techniques, it was necessary to identify the mineral composition and the radiometric specifications of the used granitic rock. The synthesized adsorbents revealed a promising selective adsorption toward the U(VI) ions from its bearing solutions even with the competence of other cations.

     

Synthesis of new transition metal complexes of 1H-perimidine derivatives having antimicrobial and anti-inflammatory activities

New series of 1H-perimidine-2-thiol derivatives and (2-substituted-1H-perimidin-1-yl)ethane-1,2-dione derivatives and their ligands (C₂₄H₁₄N₄S₂O₂) H₂L¹ and (C₂₆H₁₈N₄S₂O₂) H₂L² have been synthesized with transition metal ions, e.g., Copper (II), Silver (I), Cobalt (II) and Ruthenium (III) were prepared and evaluated for their antimicrobial, analgesic and anti-inflammatory activities. The synthesized compounds and their complexes were characterized by elemental analysis, ¹H NMR, IR, MS, molar conductance, thermal gravimetric analysis and electronic spectra. All results revealed that compounds 3 and 13 exhibited high inhibitory effects against some bacterial strains by the disc diffusion method. On the other hand, compounds 2, 3, 7 and 12 displayed potent anti-inflammatory activity.     

Preparation of multiwall carbon nanotubes (MWCNTs) stabilised by highly branched hydrocarbon surfactants and dispersed in natural rubber latex nanocomposites

The performance of single-, double- and triple-chain anionic sulphosuccinate surfactants for dispersing multiwall carbon nanotubes (MWNCTs) in natural rubber latex (NR-latex) was studied using a range of techniques, including field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA) and Raman spectroscopy. The conductivities of the nanocomposites were also investigated using four-point probe measurements. Here, MWCNTs were efficiently dispersed in NR-latex with the aid of hyperbranched tri-chain sulphosuccinate anionic surfactants, specifically sodium 1,4-bis(neopentyloxy)-3-(neopentyloxycarbonyl)-1,4-dioxobutane-2-sulphonate (TC14). This paper highlights that TC14 performs much better than that of the commercially available surfactant sodium dodecyl sulphate (SDS), demonstrating how careful consideration of surfactant architecture leads to improved dispersibility of MWCNTs in NR-latex. The results should be of significant interest for improving nanowiring applications suitable for aerospace-based technology.