Pressure‐Induced Intersite Bi?M (M=Ru, Ir) Valence Transitions in Hexagonal Perovskites

Pressure‐induced charge transfer from Bi to Ir/Ru is observed in the hexagonal perovskites Ba_3+nBiM_2+nO_9+3n (n=0,1; M=Ir,Ru). These compounds show first‐order, circa 1 % volume contractions at room temperature above 5 GPa, which are due to the large reduction in the effective ionic radius of Bi when the 6s shell is emptied on oxidation, compared to the relatively negligible effect of reduction on the radii of Ir or Ru. They are the first such transitions involving 4d and 5d compounds, and they double the total number of cases known. Ab initio calculations suggest that magnetic interactions through very short (ca. 2.6 Å) M M bonds contribute to the finely balanced nature of their electronic states.     

A simple route to derivatives of benzo[j]fluoranthene

3,6,8,11-Tetramethoxybenzo[j]fluoranthene can be made from 1,6-dimethoxynaphthalene in a one-pot ferric chloride oxidation/methanol reduction procedure. The reaction is tolerant of the presence of substituents in the 7-position of the naphthalene nucleus and provides a quick and easy route to these particular benzo[j]fluoranthenes. The reactions presumably proceed through initial formation of a bond between the 4-positions of two naphthalene molecules followed by closure of the five-membered ring. Indeed in one case some 4,4′-binaphthyl was isolated from the reaction mixture and it was generally found that better yields of the benzo[j]fluoranthrenes were obtained starting from the 4,4′-binaphthyl rather than by using the naphthalene as the starting material. In an analogous manner to the ring-closure of the 4,4′-binaphthyls, starting from a hexakisalkoxyphenylnaphthalene, a hexakisalkoxyfluoranthene could be obtained.     

Synthesis and evaluation of N6-substituted azide- and alkyne-bearing N-mustard analogs of S-adenosyl-l-methionine

The synthesis of a family of N-mustard analogs of S-adenosyl-l-methionine (SAM) containing azides and alkynes at the N6-position of the adenosine base has been accomplished from commercially available inosine. Further biochemical analysis of these analogs indicates successful modification of pUC19 plasmid DNA in an enzyme-dependent fashion with DNA methyltransferases M.TaqI and M.HhaI.     

A one-pot tandem synthesis of various 1,2-disubstituted benzimidazoles

A facile method to synthesize various 1,2-disubstituted benzimidazoles is developed. It is suggested that formation of a Meisenheimer adduct between the substrate, amine, and solvent aids the N-arylation process. The generality of the protocol is demonstrated by the efficient reactions involving numerous substituents ranging from electron-withdrawing groups to electron-donating groups.     

Characterization and optimization of heroin hapten-BSA conjugates: method development for the synthesis of reproducible hapten-based vaccines

A potential new treatment for drug addiction is immunization with vaccines that induce antibodies that can abrogate the addictive effects of the drug of abuse. One of the challenges in the development of a vaccine against drugs of abuse is the availability of an optimum procedure that gives reproducible and high yielding hapten-protein conjugates. In this study, a heroin/morphine surrogate hapten (MorHap) was coupled to bovine serum albumin (BSA) using maleimide-thiol chemistry. MorHap-BSA conjugates with 3, 5, 10, 15, 22, 28, and 34 haptens were obtained using different linker and hapten ratios. Using this optimized procedure, MorHap-BSA conjugates were synthesized with highly reproducible results and in high yields. The number of haptens attached to BSA was compared by 2,4,6-trinitrobenzenesulfonic acid (TNBS) assay, modified Ellman’s test and matrix assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS). Among the three methods, MALDI-TOF MS discriminated subtle differences in hapten density. The effect of hapten density on enzyme-linked immunosorbent assay (ELISA) performance was evaluated with seven MorHap-BSA conjugates of varying hapten densities, which were used as coating antigens. The highest antibody binding was obtained with MorHap-BSA conjugates containing 3–5 haptens. This is the first report that rigorously analyzes, optimizes and characterizes the conjugation of haptens to proteins that can be used for vaccines against drugs of abuse. The effect of hapten density on the ELISA detection of antibodies against haptens demonstrates the importance of careful characterization of the hapten density by the analytical techniques described.     

Synthesis,spectroscopy, electrochemistry,and methylation reaction of the dithiolate-based cobalt(II) complex derived from tert-butyl N-(2-mercaptoethyl)carbamate

A dithiolate-containing a carbamate mononuclear cobalt(II) complex namely, [Co(Boc-S)₂] (1), was obtained by the reaction of a methanolic solution of cobalt(II) nitrate hexahydrate with two equimolar amounts of the deprotonated form of tert-butyl N-(2-mercaptoethyl)carbamate (Boc-SH). The cobalt(II) complex (1) was characterized in the solid state and in solution by using FT–IR, Raman, UV–visible, and EI–mass spectroscopies, as well as thermal and X-ray diffraction studies. Spectral data showed that the carbamate (Boc-SH) acts as a mono-anionic bidentate ligand coordinating the cobalt(II) ion through two imine nitrogen and two deprotonated thiolate sulfur donor atoms in a distorted tetrahedral geometry. The thermoanalytical data evidence that the complex is stable up to 165 °C and undergoes complete decomposition, resulting in CoO. TEM imaging of the oxide residue shows its nano size clusters, suggesting that the complex (1) may be used as a precursor for nano-oxides. X-ray powder diffraction patterns evidence an isomorphism among the complex. The redox behavior of the cobalt(II) complex was also investigated by cyclic voltammetry. The reaction of the dithiolate cobalt(II) complex (1) with methyl iodide appears to occur intramolecularly with the cobalt-bound dithiolate, forming the cobalt(II)-bound dithioether complex [Co(Boc–SCH₃)₂]I₂ (2), as a dication complex with a clean second-order reaction of 13.24 × 10⁻² M⁻¹·s⁻¹.     

An original approach for Raman spectroscopy analysis of radioactive materials and its application to americium‐containing samples

An approach for Raman measurements of highly radioactive samples is presented here. The innovative part of this approach lies in the fact that no single part of the Raman equipment is in direct contact with the radioactive sample, as the sample is sealed in an alpha‐tight capsule. Raman analysis is effectively performed through the optical‐grade quartz window closing the capsule. This allows performing micro‐Raman measurements on radioactive samples with no limitations on the laser source wavelength, polarisation mode, spectrometer mode and microscope mode (provided the focal length of the microscope objective is greater than the thickness of the quartz window and with sub mg samples). Some example results are shown and discussed. In particular, some spectral features of americium‐containing oxide nuclear fuel specimens are presented. Raman spectra clearly reveal in these specimens the presence of abundant oxygen defects induced in the fcc fluorite lattice by trivalent americium. In order to complete the analysis the Raman spectrum of pure americium dioxide was also measured with a lower energy excitation source compared with previous research. The current results seem to be consistent with the possible occurrence of a photolysis process induced by the Raman laser, resulting in the formation of hyperstoichiometric americium sesquioxide Am₂O_{3 + z}. Such a photolytic process is deemed to be unavoidable when visible lasers are used as excitation sources for the Raman analysis of americium dioxide. © 2015 The Authors Journal of Raman Spectroscopy Published by John Wiley & Sons, Ltd.     

In vitro dielectrophoresis of HEK cell migration for stimulating chronic wound epithelialization

This article describes a dielectrophoresis (DEP)-based simulation and experimental study of human epidermal keratinocyte (HEK) cells for wounded skin cell migration toward rapid epithelialization. MyDEP is a standalone software designed specifically to study dielectric particles and cell response to an alternating current (AC) electric field. This method demonstrated that negative dielectrophoresis (N_DEP) occurs in HEK cells at a wide frequency range in highly conductive medium. The finite element method was used to characterize particle trajectory based on DEP and drag force. The performance of the system was assessed using HEK cells in a highly conductive EpiLife suspending medium. The DEP experiment was performed by applying sinusoidal wave AC potential at the peak-to-peak voltage of 10 V in a tapered aluminum microelectrode array from 100 kHz to 1 MHz. We experimentally observed the occurrence of NDEP, which attracted HEK cells toward the local electric field minima in the region of interest. The DIPP-MotionV software was used to track cell migration in the prerecorded video via an automatic marker and estimate the average speed and acceleration of the cells. The results showed that HEK cell migration was accomplished approximately at 6.43 μm/s at 100 kHz with 10 V, and F_DEP caused the cells to migrate and align at the target position, which resulted in faster wound closures because of the application of an electric field frequency to HEK cells in random locations.     

Correction to: Production and subsequent separation of 47Sc of nuclear medicine applications using neutron‑induced reactions on different natural targets

Journal of Radioanalytical and Nuclear Chemistry -     

Synthesis,design of experiments and optimization of heterogeneous Fenton-like degradation of tartrazine by MgFe2O4 nano-catalyst

In this work, magnesium ferrites nanoparticles (MgFe₂O₄ NPs) were successfully fabricated by sol-gel auto-combustion (SGAC) method and were used in heterogeneous Fenton-like degradation of tartrazine. The obtained products were characterized using XRD, FTIR, SEM and EDX. XRD studies confirmed that the synthesized MgFe₂O₄ NPs had a cubic spinel structure. The average crystallite size was evaluated using the Debyee Scherrer formula and found to be in the range 16.18–28.55 nm. In FTIR spectra, two primary absorption bands at 571 cm^?1 and 415 cm^?1 were observed. The spinel ferrites are characterized by these bands and the EDX confirms the presence of the desired elements Mg, Fe, and O. The influences of operating parameters were examined using the Box Behnken statistical design (BD), including magnesium ferrite dosage (0.04–0.12 g/L), tartrazine concentration (30–50 mg/L) and H₂O₂ concentration (3.53–7.06 mM). Using analysis of variance, a significant quadratic model was created. Optimum conditions were magnesium ferrite dosage of 0.092 g/L, tartrazine concentration of 30.21 mg/L and H₂O₂ concentration of 6.66 mM, respectively. The predicted degradation efficiency within the optimum conditions as established by the suggested model was 98.4%. Confirmatory tests were carried out and the degradation efficiency of 98.9% was observed, which was in good agreement with the model's prediction. After five recuperation and reapplications, the catalyst's degradation efficiency remains stable. These findings indicate that a heterogeneous Fenton-like process utilizing MgFe₂O₄ is effective in advanced wastewater treatment.