Synthesis and antidiabetic activity of novel triazole derivatives containing amino acids

New series of triazole derivatives coupled with amino acids 1a-h were obtained via multicomponent reaction of 2-hydroxy benzaldehyde or 2-hydroxy acetophenone with thiosemicarbazide and different amino acids. The obtained compounds were reacted with p-toluinesulfonyl chloride 2 to give the corresponding sulfonamides 3a-h . Compound 1b was allowed to react with different aromatic aldehydes or cyclic ketone under alkaline conditions to afford the expected imino compounds 4a-d and 6a-c , respectively. These compounds were allowed to react with ethyl glycolate to yield the expected thiazolidinone derivatives 5a-d or 7a-c , respectively. Structures of the newly synthesized compounds were found to be in accordance with their elemental analyses and spectral data. The obtained compounds exhibited very prominent in vitro and in vivo antihyperglycemic effect at a dose of 40 mg/kg body weight compared to the standard drug gliclazide and control. The antidiabetic effect was investigated using oral glucose tolerance test in normal and non-insulin-dependent diabetes mellitus (NIDDM) in STZ-rat model. Compounds 3a - h , 5b , 5c , 5d , 7a , 7b , and 7c showed significant activity in lowering blood glucose (more than 80%) compared to the NIDDM control.     

Cyanoacetanilides Intermediates in Heterocyclic Synthesis. Part 2: Preparation of Some Hitherto Unknown Ketene Dithioacetal,Benzoazole and Pyridone Derivatives

Ketene dithioacetal 3 , aminopyrazole 5 , tetrazine 7 , benzoazole 9 and pyridone 11 , 12 , 13 and 16 derivatives were prepared from cyanoacetanilide 1 as a starting material.     

Mg-LDH Nanoclays Intercalated Fennel and Green Tea Active Ingredient: Field and Laboratory Evaluation of Insecticidal Activities against Culex pipiens and Their Non-Target Organisms

(1) Background: Mosquito control with essential oils is a growing demand. This work evaluated the novel larvicidal and adulticidal activity of fennel and green tea oils and their Layered double hydroxides (LDHs) nanohybrid against Culex pipiens (Cx. pipiens) in both laboratory and field conditions and evaluated their effect against non-target organisms; (2) Methods: Two types of nanoclays, MgAl-LDH and NiAl-LDH were synthesized and characterized using PXRD, TEM and SEM, whereas their elemental analysis was accomplished by SEM-EDX; (3) Results: Mg and Ni LDHs were synthesized by the co-precipitation method. The adsorption and desorption of active ingredients were conducted using LC MS/MS, with reference to the SEM-EXD analysis. The desorption process of MgAl-LDH intercalated green tea oil was conducted using ethanol, and reveled significant peaks related to polyphenols and flavonoids like Vanillin, Catechin, Daidzein, Ellagic acid, Naringenin, Myricetin and Syringic acid with concentrations of 0.76, 0.73, 0.67, 0.59, 0.52, 0.44 and 0.42 μg/g, respectively. The larvicidal LC₅₀ values of fennel oil, Mg-LDH-F, and Ni-LDH-F were 843.88, 451.95, 550.12 ppm, respectively, whereas the corresponding values of green tea were 938.93, 530.46, and 769.94 ppm. The larval reduction percentage of fennel oil and Mg-LDH-F reached 90.1 and 96.2%, 24 h PT and their persistence reached five and seven days PT, respectively. The reduction percentage of green tea oil and Mg-LDH-GT reached 88.00 and 92.01%, 24 h PT and their persistence reached five and six days PT, respectively. Against adults, Mg-LDH-GT and Ni-LDH-GT were less effective than green tea oil as their LC₉₅ values were 5.45, 25.90, and 35.39%, respectively. The reduction in adult density PT with fennel oil, Mg-LDH-F, green tea oil, and Mg-LDH-GT reached 83.1, 100, 77.0, and 99.0%, respectively, 24 h PT and were effective for three days. Mg-LDH-GT and Mg-LDH-F increased the predation Cybister tripunctatus (71% and 69%), respectively; (4) Conclusions: For the first time, Mg-LDH-GT and Mg-LDH-F was the best system loaded with relatively good desorption release to its active ingredients and significantly affected Cx. pipiens larvae and adults in both laboratory and field circumstances, and it could be included in mosquito control.     

A Composition Analysis and an Antibacterial Activity Mechanism Exploration of Essential Oil Obtained from Artemisia giraldii Pamp

The goal of this work was to use the GC-MS technique to explore the chemical components of Artemisia giraldii Pamp essential oil (AgEo) and to uncover its antibacterial activity, specifically the antibacterial mechanism of this essential oil. There were a total of 63 chemical constituents in the AgEo, monoterpenes (10.2%) and sesquiterpenes (30.14%) were found to be the most common chemical components, with camphor (15.68%) coming in first, followed by germacrene D. (15.29%). AgEo displayed significant reducing power and good scavenging ability on hydroxyl radicals, 2,2-Diphenyl-1-picrylhydrazyl (DPPH) radicals, and 2,2′-Azinobis-(3-ethylbenzthiazoline-6-sulphonate (ABTS) radicals, according to antioxidant data. The diameter of the inhibition zone (DIZ) of AgEo against S. aureus and E. coli was (14.00 ± 1.00) mm and (16.33 ± 1.53) mm, respectively; the minimum inhibitory concentration (MIC) of AgEo against E. coli and S. aureus was 3 μL/mL and 6 μL/mL, respectively; and the minimum bactericidal concentration (MBC) of AgEo against E. coli and S. aureus was 6 μL/mL and 12 μL/mL, respectively. The antibacterial curve revealed that 0.5MIC of AgEo may delay bacterial growth while 2MIC of AgEo could totally suppress bacterial growth. The relative conductivity, alkaline phosphatase (AKP) activity, and protein concentration of the bacterial suspension were all higher after the AgEo treatment than in the control group, and increased as the essential oil concentration was raised. In addition, the cell membrane ruptured and atrophy occurred. The study discovered that AgEo is high in active chemicals and can be used as an antibacterial agent against E. coli and S. aureus, which is critical for AgEo’s future research and development.     

Investigating neutron back scattering technique for the detection of oil water separation levels in horizontal gravity oil separators

Journal of Radioanalytical and Nuclear Chemistry - Neutron backscattering technique is investigated as an alternative way for measuring the level of water in the horizontal oil gravity separators....     

Kinetic Determination of Iodide Based on its Effect on the Hydrogen Peroxide Oxidation of Triflupromazine

Summary.  A new selective, sensitive, and simple kinetic method is developed for the determination of trace amounts of iodide. The method is based on the catalytic effect of iodide on the reaction of triflupromazine (TFP) with H₂O₂. The reaction is followed spectrophotometrically by tracing the oxidation product at 498 nm within 1 min after addition of H₂O₂. The optimum reaction conditions are TFP (0.4 × 10⁻³ M), H₂SO₄ (1.0M), H₃PO₄ (2.0M), and H₂O₂ (1.6M) at 30°C. Following this procedure, iodide can be determined with a linear calibration graph up to 4.5 ng ċ cm⁻³ and a detection limit of 0.04 ng ċ cm⁻³, based on the 3 S_b criterion. The method can also be applied to the determination of iodate and periodate ions. Determination of as little as 0.2, 1.0, 2.0, and 4.0 ng ċ cm⁻³ of I⁻, IO₃ ^-, or IO₄ ^- in aqueous solutions gave an average recovery of 98% with relative standard deviations below 1.6% (n = 5). The method was applied to the determination of iodide in Nile river water and ground waters as well as in various food samples after alkaline ashing treatment. The method is compared with other catalytic spectrophotometric procedures for iodide determination. Received January 19, 2001. Accepted (revised) March 12, 2001     

A combined experimental and DFT investigation of the adsorption of humic acid by-products on polypyrrole

This study sheds light on the removal of humic acid by-products (trimellitic and pyromellitic acids; TMA and PMA, respectively) from aqueous solution using conducting polypyrrole (PPy) as an effective adsorbent. The effects of experimental factors including contact time, solution pH, initial concentration, adsorbent dose, and temperature were systematically investigated. The pseudo-second-order kinetic model provides the best correlation with adsorption experimental data. The equilibrium adsorption was well described by the Langmuir model with maximum mono-layer adsorption capacities of 47.62 and 71.43?mg?g^?1 for TMA and PMA, respectively. The analysis of thermodynamic parameters indicated that the adsorption process was spontaneous and endothermic in nature. In addition, we investigated the adsorption mechanism using the density functional theory (DFT) calculations. The TMA and PMA were physisorbed on the PPy surface through the formation of hydrogen bonds between carboxylic groups of adsorbate molecules and the amino group of the adsorbent. The calculated theoretical data were in good agreement with experiments.     

Unsteady MHD double-diffusive convection boundary-layer flow past a radiate hot vertical surface in porous media in the presence of chemical reaction and heat sink

This paper presents an analytical study of the unsteady MHD free convective heat and mass transfer flow of a viscous, incompressible, gray, absorbing-emitting but non-scattering, optically-thick and electrically conducting fluid occupying a semi-infinite porous regime adjacent to an infinite moving hot vertical plate with constant velocity. We employ a Darcian viscous flow model for the porous medium the Rosseland diffusion approximation is used to describe the radiative heat flux in the energy equation. The homogeneous chemical reaction of first order is accounted in mass diffusion equation. The governing equations are solved in closed form by Laplace-transform technique. A parametric study of all involved parameters is conducted and representative set of numerical results for the velocity, temperature, concentration, shear stress function $\frac{\partial u}{\partial y} \vert_{y=0}$ , temperature gradient $\frac{\partial \theta }{ \partial y}\vert_{y=0}$ , and concentration gradient $\frac{ \partial \phi }{\partial y}\vert_{y=0}$ is illustrated graphically and physical aspects of the problem are discussed.     

Finite element method for the stress analysis of isotropic cylindrical helical spring

This paper presents an efficient two nodes finite element with six degrees of freedom per node, capable to model the total behaviour of a helical spring. The formulation, which includes the shear deformation effects, is based on the assumed forces hybrid approach. The resultant forces approximation verifies exactly the resultant equilibrium equations. The developed model proves its accuracy compared with other elements. This element permits to get the distribution of different stresses along the spring and through the wire surface by only one element.     

Fast parametrically excited van der Pol oscillator with time delay state feedback

We investigate the effect of a fast vertical parametric excitation on self-excited vibrations in a delayed van der Pol oscillator. We use the method of direct partition of motion to derive the main autonomous equation governing the slow dynamic in the vicinity of the trivial equilibrium. Then, we apply the multiple scales method on this slow dynamic to derive a second-order slow flow system describing the modulation of slow dynamic. In particular we analyze the slow flow to obtain the effect of a fast excitation on the regions in parameter space where self-excited vibrations can be eliminated. We have shown that in the case where the time delay and the feedback gains are imposed, fast vertical parametric excitation can be an alternative to suppress undesirable self-excited vibrations in a delayed van der Pol oscillator.