Theoretical study of the reaction of alkynes with furan catalyzed by AuCl3 and AuCl

A general scheme for the endo‐ and exo‐cyclization of furan reactivity with [L ‐Au^{III, I}Cl_x] with (x = 3, 1 and L ‐acetylene and vinylidene) complexes is investigated using density functional theory (DFT) code. Two conceivable mechanisms via a [4 + 2] Diels–Alder process or carbene complex are analyzed. According to the activation energy values of the gold (III and I) catalyst, the first mechanism, which implies the Diels–Alder reaction of Au^III, is thermodynamically favored and gives more evidence of the intramolecular addition of the furan with the alkynes. The second mechanism, presumably assisted by the spontaneous formation of the exo‐vinylidene complexes and intermediates of gold (III, I) by forming the carbene complex, is kinetically favored. Additionally, we compare our results with other structures with intramolecular additions that exhibit the quasi‐similarity of gold analogue structures. Differences in activation energies are observed, according to the functional used. Finally, we probe the solvent effects, which decrease the energy barrier in the path. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Synergism in the solvent extraction of samarium by thenoyltrifluoroacetone and triphenyl or trioctyl phosphine oxide mixture

Synergistic extraction of samarium with TTA(HA) and TPPO or TOPO (B) mixtures were investigated. The extracted complex was proved to have the general formula SmA₃ · 2B. A graphical determination for the formation constants of these complexes gave the values 3.9 × 10¹³ and 8.2 × 10¹⁰ for SmA₃ · 2TOPO and SmA₃ · 2TPPO in benzene, respectively.     

Evaluating the residence time for cesium removal from simulated Hanford tank wastes using SuperLig® 644 resin

Batch contact and column experiments were performed to evaluate the effect of residence time on cesium removal from two simulated Hanford tank wastes using SuperLig^® 644 resin. The two waste simulants mimic the compositions of tanks 241-AZ-102 and 241-AN-107 at the U.S. Department of Energy (DOE) Hanford site. A single column made of glass tube (2.7-cm i.d.), which contained ~100 ml of H-form SuperLig^® 644 resin was used in the column experiments. The experiments each consisted of loading, elution, and regeneration steps were performed at flow rates ranging from 0.64 to 8.2 BV/h for AZ-102 and from 1.5 to 18 BV/h for AN-107 simulant. The lowest flow rates of 0.64 and 1.5 BV/h were selected to evaluate less than optimal flow conditions in the plant. The range of the flow rates is consistent with the River Protection Project design for the waste treatment plant (WTP) columns, which will operate at a flow rate between 1.5 to 3 BV/h. Batch contact experiments were also performed for two batches of SuperLig^® 644 to determine the equilibrium distribution coefficients (K _d) as a function of Cs concentration. The column experiments revealed that adequate column loading for Cs on SuperLig^® 644 (50% breakthrough at 100 bed volumes) can be achieved for the two simulated Hanford tank wastes at the nominal plant flow rates of 1.5 and 3 BV/h (residence times 40 and 20 minutes). The column performance was marginally improved at flow rates below the nominal rates. At flow rates higher than the nominal, the Cs loading deteriorated significantly. The SuperLig^® 644 was eluted effectively with 0.5M nitric acid. The elution required approximately 15 BVs to reduce Cs concentration to below 1% of initial Cs concentration in the feeds.     

Alkenyl selenols and selenocyanates: synthesis, spectroscopic characterization by photoelectron spectroscopy, and quantum chemical study

Vinyl, allyl, and homoallyl selenols were easily prepared by a chemoselective reduction of the corresponding selenocyanates with aluminum hydrides. Two stable vinyl and five stable allyl conformers of both series were predicted on the potential-energy surface. The interaction of SeH or SeCN groups with the vinyl group has been investigated with UV photoelectron spectroscopy and quantum chemical calculations, using the MP2/cc-pVTZ and B3LYP/cc-pVTZ levels. In the vinyl derivatives, a surprisingly strong direct conjugation of the selenium lone electron pair and the C=C double bond was observed. On the other hand, in allyl position the selenium lone pair is independent on the C=C double bond, and the hyperconjugation between the Se-C bond and the double bond is the ruling effect. Thus is clarified the type and extent of the interaction between the SeH or SeCN group and the unsaturated moiety.     

Friedel-Crafts reactions catalyzed by samarium diiodide

Samarium diiodide is an efficient precatalyst for the Friedel-Crafts reaction involving various aromatic substrates and chelating electrophiles. Alkyl 3,3,3-trifluoropyruvates are transformed into α-hydroxyesters in good yields with total regioselectivity. In reactions involving an ethyl glyoxylate or a glyoxylic imine, α-hydroxyesters or α-aminoesters are obtained with variable amounts of products resulting from a double Friedel-Crafts reaction.     

O-silylated enolate phenylthialkylation: A synthesis of α,β-unsaturated 5- and 6-membered lactones.

ZnBr₂-catalysed phenylthioalkylation of ketene bis(trimethylsilyl)acetals, obtained from carboxylic acids, with appropriate α-chlorosulphides can be used to prepare γ- and δ- lactones.     

Barrier to internal rotation in 2,3- and 3,3-difluoropropenal and their methyl derivatives

The conformational stability and structure of 2,3-dimethylpropenal, 2,3-difluoropropenal and their 3,3-dimethyl and 3,3-difluoro derivatives were investigated utilizing ab initio calculations with 3-21G and 6-31G basis sets. For 2,3-dimethylpropenal and 3,3-difluoropropenal the s-trans was predicted to be the low-energy form. In the case of 3,3-dimethylpropenal and 2,3-difluoropropenal the s-cis was predicted by both levels of calculation to be the more stable conformer. Full optimization was performed at the transition states and the barriers to internal rotation were calculated. Methyl and fluorine substitution were found to significantly increase the barrier to interconversion in propenal. The relative change in the barrier depends on the position and the type of the substituent. The trans to cis barrier in 2,3-dimethylpropenal was calculated to be about 3 kcal mol⁻¹ greater than that in 3,3-dimethylpropenal, while the cis to trans barrier in 2,3-difluoropropenal was predicted to be about 7 kcal mol⁻¹ higher than the corresponding one in 3-3-difluoropropenal.     

Determination of trace elements in Egyptian molasses by instrumental neutron activation analysis

Multielement neutron activation analysis has been applied to the determination of macro, micro and trace amounts of Al, Br, Ca, Cl, Co, Cr, Cs, Fe, K, La, Mg, Mn, Na, Rb, Sc and V in molasses of Kom Ombo, Edfu, Armant, Naga Hammady and Abu Korkass cane sugar factories. The threshold element concentrations are acceptable and below the safety. Differences in element concentrations may be related to different botanic textures and structures, different compositions of sugar cane plants, corrosion of containers or changes in soil as a result of geochemical differentiation. The method is sensitive down to 0.038 ppm of V. The relative errors due to counting statistics are in the range of 0.2–11%.     

Renewable-surface sol-gel derived carbon ceramic electrode fabricated by [Ru(bpy)(tpy)Cl]PF6 and its application as an amperometric sensor for sulfide and sulfur oxoanions

A highly sensitive and fast responding sensor for the determination of thiosulfate, sulfite, sulfide and dithionite is described. It consists of a chemically modified carbon ceramic composite electrode (CCE) containing [Ru(bpy)(tpy)Cl]PF6 complex that was constructed by the sol-gel technique. A reversible redox couple of Ru(II)/Ru(III) was observed as a solute in acetonitrile solution and as a component of carbon based conducting composite electrode. Electrochemical behavior and stability of modified CCE were investigated by cyclic voltametry, the apparent electron transfer rate constant (kappa(S)) and transfer coefficient (a) were determined by cyclic voltametry which were about 28 s(-1) and 0.43 respectively. Electrocatalytic oxidation of S(2-), SO3(2-), S2O4(2-) and S2O3(2-) were effective at the modified electrode at significantly reduced overpotentials and in the pH range 1-11. Optimum pH values for amperometric detection of thiosulfate, dithionite, sulfide and sulfite are 7, 9, 2 and 2. Under the optimized conditions the calibration curves are linear in the concentration ranges 1-500, 3-80, 2-90 and 1-100 microM for S2O3(2-), SO3(2-), S2- and S2O4(2-) determination. The detection limit (signal to noise is 3) and sensitivity are 0.5 and 12, 2.8 and 6, 1.6 and 8, and 0.65 microM and 80 nA microM(-1) for thiosulfate, sulfite, sulfide and dithionite detection. The modified carbon ceramic electrode doped with Ru-complex shows good reproducibility, a short response time (t < 2 s), remarkable long term stability (> 6 month) and especially good surface renewability by simple mechanical polishing (RSD for eight successive polishing is 2%). The advantages of this sulfur compound amperometric detector based on ruthenium doped CCE are high sensitivity, inherent stability at a broader pH range, excellent catalytic activity, less expense and simplicity of preparation in comparison with recently published papers. This sensor can be used as a chromatographic detector for analysis of sulfur derivatives.     

Microdetermination of the fluoride ion using an amplification reaction

Summary A new simple, rapid and accurate amplification micro method for fluoride determination is described. It is based on the reaction between the sparingly soluble calcium iodate and the fluoride ion. After adding isopropyl alcohol to the solution, so that its final concentration is 65%, and filtering, an equivalent amount of the iodate is obtained. The latter is titrated iodometrically resulting in a six-fold amplification of the titre. The method is reproducible over a range from 0.4–8 mg fluoride ion. The mean recovery is 99.69%, after applying a correction factor due to potassium iodate solubility.

---

Zusammenfassung Ein Multiplikationsverfahren zur Mikrobestimmung von Fluorid wurde beschrieben. Es beruht auf der Umsetzung zwischen dem schlecht löslichen Calciumjodat und Fluorid. Nach Zusatz von i-Propylalkohol, bis die Lösung 65% davon enthält, wird filtriert. Die äquivalente Jodatmenge wird jodometrisch titriert. Zwischen 0,4 und 8 mg Fluorid sind die Ergebnisse reproduzierbar. Bei Anwendung eines Korrekturfaktors wegen der Löslichkeit von Kaliumjodat wurden 99,69% Fluorid wieder gefunden.