Computational studies on cyclic [n]paraphenyleneacetylenes using homodesmotic reactions

Cyclic [n]paraphenyleneacetylenes ([n]CPPAs) are potentially useful compounds for molecular electronics. In this article, a homodesmotic reaction scheme coupled with density functional theory has been used to estimate theoretically strain energies and heats of formation of [n]CPPAs. Calculations have been done for a series of [n]CPPAs, containing up to ten phenylacetylene units. Strain energies of [n]CPPAs decrease, while heats of formation increase steadily with the increase in the number of phenylacetylene units using homodesmotic reaction schemes. B3LYP and mPW1PW91 functionals have been used with the Pople basis set 6-31G* to analyze the trends. The results are sensitive to the scheme of homodesmotic reaction chosen, thereby necessitating careful chemical consideration before spending considerable computational resources for higher [n]CPPAs not considered here. Computational estimates for the ring diameter of [n]CPPAs and absolute entropy have also been obtained here. The HOMO-LUMO gaps of the belt shaped [n]CPPAs show an odd–even difference. In addition, the HOMOs of the [3]CPPA, [5]CPPA, [7]CPPA and [9]CPPA are doubly degenerate.     

Convergence Dynamics of Delayed Hopfield-Type Neural Networks Under Almost Periodic Stimuli

Convergence dynamics of Hopfield-type neural networks subjected to almost periodic external stimuli are investigated. In this article, we assume that the network parameters vary almost periodically with time and we incorporate variable delays in the processing part of the network architectures. By employing Halanay inequalities, we obtain delay independent sufficient conditions for the networks to converge exponentially toward encoded patterns associated with the external stimuli. The networks are guaranteed to have exponentially hetero-associative stable encoding of the external stimuli.     

Spin compensation temperatures induced by longitudinal fields in a mixed spin-3/2 and spin-5/2 Ising ferrimagnet

I studied the ferrimagnetic Ising model with nearest neighbour interactions for a square lattice and simple cubic one, using mean field theory. The free energy of a mixed spin Ising ferrimagnetic model was calculated from a mean field approximation of the Hamiltonian. By minimizing the free energy, I obtained the equilibrium magnetizations and the compensation temperatures. Clear indications of the single-ion anisotropies on the compensation points of the mixed spin-3/2 and spin-5/2 ferrimagnetic lattices are found. Some interesting behaviors of these systems are obtained depending not only on the values of magnetic anisotropies for both sublattice sites but also on the lattice structure. The longitudinal magnetic fields dependence of the spin compensation temperature is the main focus of research. The possibility of many compensation temperatures is indicated.     

Short time synthesis of high quality carbon nanotubes with high rates by CVD of methane on continuously emerged iron nanoparticles

We report the variation of yield and quality of carbon nanotubes (CNTs) grown by chemical vapor deposition (CVD) of methane on iron oxide-MgO at 900-1000 °C for 1-60 min. The catalyst was prepared by impregnation of MgO powder with iron nitrate, dried, and calcined at 300 °C. As calcined and unreduced catalyst in quartz reactor was brought to the synthesis temperature in helium flow in a few minutes, and then the flow was switched to methane. The iron oxide was reduced to iron nanoparticles in methane, while the CNTs were growing.TEM micrographs, in accordance with Raman RBM peaks, indicate the formation of mostly single wall carbon nanotubes of about 1.0 nm size. High quality CNTs with I_G/I_D Raman peak ratio of 14.5 are formed in the first minute of CNTs synthesis with the highest rate. Both the rate and quality of CNTs degrades with increasing CNTs synthesis time. Also CNTs quality sharply declines with temperature in the range of 900-1000 °C, while the CNTs yield passes through a maximum at 950 °C. About the same CNTs lengths are formed for the whole range of the synthesis times. A model of continuous emergence of iron nanoparticle seeds for CNTs synthesis may explain the data. The data can also provide information for continuous production of CNTs in a fluidized bed reactor.     

Surfactant effect on the conductivity behavior of CsH2PO4: Characterization by electrochemical impedance spectroscopy

Cesium dihydrogen phosphate (CDP) nanoparticles were synthesized using the surfactants cetyltrimethyl ammonium bromide (CTAB), polyoxyethylene-polyoxypropylene (F-68) and (F-68:CTAB) with molar ratio 0.06. The samples conductivity such as CDP_CTAB, CDP_F-68 and CDP_{(F-68:CTAB)0.06} was studied by impedance spectroscopy in the frequency range 0.01 Hz to 1 MHz. The Nyquist plots were drawn at different temperatures of 210, 230 and 260 °C, which are defined below transition, phase transition and above transition, respectively. The measured conductivities obey the Arrhenius relation. The influence of surfactants on conductivity are more significant at higher temperature due to grain boundary. The conductivity of CDP_CTAB increased slightly with increasing temperature to 260 °C, whereas the conductivity of other samples decreased with increasing temperature over 230 °C. The results indicated that the conductivities increase in the order of CDP_CTAB>CDP_{(F-68:CTAB)0.06}>CDP_F-68. These are in accordance to the ion exchange capacities of the samples that the surfactant shows a direct influence on the samples proton mobility. It is found that the conductivity of CsH₂PO₄ is influenced by surfactant type.     

n-Type GaAs/AlGaAs heterostructure detector with a 3.2 THz threshold frequency

Terahertz detection using the free-carrier absorption requires a small internal work function of the order of a few millielectron volts. A threshold frequency of 3.2 THz (93 microm or approximately 13 meV work function) is demonstrated by using a 1 x 10(18) cm(-3) Si-doped GaAs emitter and an undoped Al(0.04)Ga(0.96)As barrier structure. The peak responsivity of 6.5 A/W, detectivity of 5.5 x 10(8) Jones, and quantum efficiency of 19% were obtained at 7.1 THz under a bias field of 0.7 kV/cm at 6 K, while the detector spectral response range spans from 3.2 to 30 THz.     

Distortion-free single point imaging of multi-layered composite sandwich panel structures

The results of a magnetic resonance imaging (MRI) investigation concerning the effects of an aluminum honeycomb sandwich panel on the B1 and B0 fields and on subsequent image quality are presented. Although the sandwich panel structure, representative of an aircraft composite material, distorts B0 and attenuates B1, distortion-free imaging is possible using single point (constant time) imaging techniques. A new expression is derived for the error caused by gradient field distortion due to the heterogeneous magnetic susceptibility within a sample and this error is shown not to cause geometric distortion in the image. The origin of the B0 distortion in the sample under investigation was also examined. The graphite-epoxy 'skin' of the panel is the principal source of the B0 distortion. Successful imaging of these structures sets the stage for the development of methods for detecting moisture ingress and degradation within composite sandwich structures.     

Photonic crystal channel drop filters with mirror cavities

In this paper, a new channel drop filter in two dimensional photonic crystals with mirror cavities is proposed. In the structure, three cavities are used. One is used for a resonant tunneling-based channel drop filter. The others are used to realize reflection feedback in the bus waveguide, which consists of a point defect micro-cavity side-coupled to a waveguide. The simulation results by using the finite-difference time-domain method conclude 98% output efficiency.     

Acid-induced gelation behavior of sonicated casein solutions

Casein gels were made from solutions sonicated by 24 and 130 kHz ultrasounds for 0, 60 and 120 min, followed by acidification with glucono-δ-lactone at 30 °C. The dynamics of gel formation were studied using rheological methods and microstructure of gels was monitored using scanning electron microscopy. Sonication postponed the gelation point to a lower pH value and increased the elasticity of freshly formed gels. It also resulted in gels with a more interconnected structure and smaller non-distinguishable particulates. This structure was especially dominant for the gel made from the solution already sonicated for 120 min.     

Dielectric Properties of Colossal-Dielectric-Constant Na1/2La1/2Cu3Ti4O12 Ceramics Prepared by Spark Plasma Sintering

In the current study, we report on the dielectric behavior of colossal-dielectric-constant Na_1/2La_1/2Cu₃Ti₄O₁₂ (NLCTO) ceramics prepared by mechanochemical synthesis and spark plasma sintering (SPS) at 850 °C, 900 °C, and 925 °C for 10 min. X-ray powder diffraction analysis showed that all the ceramics have a cubic phase. Scanning electron microscope observations revealed an increase in the average grain size from 175 to 300 nm with an increase in the sintering temperature. SPS NLCTO ceramics showed a room-temperature colossal dielectric constant (>10³) and a comparatively high dielectric loss (>0.1) over most of the studied frequency range (1 Hz–40 MHz). Two relaxation peaks were observed in the spectra of the electrical modulus and attributed to the response of grain and grain boundary. According to the Nyquist plots of complex impedance, the SPS NLCTO ceramics have semiconductor grains surrounded by electrically resistive grain boundaries. The colossal dielectric constant of SPS NLCTO ceramics was attributed to the internal barrier layer capacitance (IBLC) effect. The high dielectric loss is thought to be due to the low resistivity of the grain boundary of SPS NLCTO.