Capillary electrochromatography with monolithic silica columns III. Preparation of hydrophilic silica monoliths having surface-bound cyano groups: chromatographic characterization and application to the separation of carbohydrates, nucleosides, nucleic acid bases and other neutral polar species

Two synthetic routes have been introduced and evaluated for the preparation of hydrophilic silica-based monoliths possessing surface-bound cyano functions. In one synthetic scheme, the silica monolith was reacted in a single step with 3-cyanopropyldimethylchlorosilane to yield a cyano phase referred to as CN-monolith. In a second synthetic route, the silica monolith was first reacted with gamma-glycidoxypropyltrimethoxysilane (gamma-GPTS), followed by a reaction with 3-hydroxypropionitrile (3-HPN) to give a stationary phase denoted CN-OH-monolith. Although the gamma-GPTS was intended to play the role of a spacer arm to link the 3-HPN to the silica surface, this spacer arm became an integral part of the hydrophilic stationary phase. Thus, the CN-OH-monolith can be viewed as a double-layered stationary phase (i.e., stratified phase) with a hydroxy sub-layer and a cyano top layer. Due to its stronger hydrophilic character, the CN-OH-monolith yielded higher retention and better selectivity than the CN-monolith. The CN-OH-monolith was demonstrated in the normal-phase capillary electrochromatography (CEC) of various polar compounds including phenols and chloro-substituted phenols, nucleic acid bases, nucleosides, and nitrophenyl derivatives of mono- and oligosaccharides. The CN-OH-monolith yielded a relatively strong electroosmotic flow over a wide range of mobile phase composition, thus allowing rapid separation of the polar compounds studied.     

Enaminones in heterocyclic synthesis: Synthesis and chemical reactivity of 3‐anilino‐1‐substituted‐2‐propene‐1‐ one

The 3‐anilinoenones 3a,b were prepared from the corresponding 3‐dimemyl‐aminopropenones. The reactivity of 3a,b towards a variety of carbon and nitrogen nucleophiles as well as naphthoquinones is reported.     

Selective monodeoxygenation of quinoxaline-amino acid and ester dioxides

Trimethyl phosphite selectively removes the N-1-oxygen in N-(3-methyl-2-quinoxaloyl) L-α-amino ester-1,4-dioxides, whereas it removes the N-4-oxygen in the corresponding series of dioxides lacking the C₃-Me. This selectivity reversal reflects the relative strength of the intrahydrogen-bridging to the N-1-oxygen. The monoxides having the favourable N-oxygen are not reduced to the quinoxalines, implying that the reagent requires doubling of the N-oxide function for deoxygenation. However, alkaline sodium dithionite removes the N-1-oxygen in both series of the amino acid-dioxides, as well as in the parent quinoxaline-2-carboxylic acid-dioxides, a result that contradicts the report stating removal of the N-4-oxygen. The N-oxygenated quinoxalinium ion ($\text{m}\text{e}$ 145 or 159) prevails in the MS of the 4-oxides, but it is not observed (<1%) for the isomeric 1-oxides. ¹H NMR, ¹³C NMR and UV spectral data also offer diagnostic criteria for differentiation between the isomeric 1- and 4-oxides. Aryl-heteryl “interaction” (as revealed by ¹H NMR, though not by ¹³C NMR in the aromatic amino ester dioxides) is not manifested in the corresponding monoxides.     

Gamma-radiation effects on the reduction of hematite to iron in the graphite-iron(III) oxide system

The effects of⁶⁰Co-gamma radiation and of various sample composition on the reduction of hematite to iron in the graphite-iron(III) oxide system in air were studied using isothermal and dynamic TG techniques. Kinetic analysis of isothermal data were performed according to various theoretical models of heterogeneous reactions and the results showed that the three-dimensional phase boundary model gives the best fit of data. Analysis of dynamic TG data were made using Ozawa integral method, Coats-Redfern method and a composite method based on the modified Coats and redfern equation. The activation parameters were calculated and the results of the different methods were compared and discussed.Radiation apparently did not introduce a change in the reaction model or mechanism. However, there is a decrease in activation energy and frequency factor upon irradiation and a decrease in the half-life time of the reaction which is remarkable at the higher temperatures and higher doses.

---

Zusammenfassung Mittels isothermer und dynamischer TG wurde im Graphit-Eisen(III)oxidsystem in Luft der Einfluß von⁶⁰Co-Gammastrahlung und von verschiedenen Probenzusammensetzungen auf die Reduktion von Hämatit zu Eisen untersucht. Entsprechend verschiedener theoretischer Modelle heterogener Reaktionen wurde eine kinetische Analyse der isothermen Daten durchgeführt und die Ergebnisse zeigten, daß das dreidimensionale Phasengrenzenmodell die beste Übereinstimmung liefert. Die Analyse der dynamischen TG-Daten wurde mittels der Integralmethode von Ozawa, der Coats-Redfem-Methode und einer zusammengesetzten Methode auf der Grundlage der modifizierten Coats und Redfern Gleichung durchgeführt. Die Aktivierungsparameter wurden berechnet und die Ergebnisse der verschiedenen Methoden miteinander verglichen und diskutiert.Strahlung scheint keine Änderung des Reaktionsmodelles oder des Mechanismus hervorzurufen. Durch Bestrahlung gibt es aber ein Absinken der Aktivierungsenergie und des Frequenzfaktors sowie ein Absinken der Halbwertszeit der Reaktion, was bei höheren Temperaturen und höherer Dosis bemerkenswert groß ist.

     

Oscillating repulsive force between macroscopic surfaces as a consequence of the fluctuation of the density in the gap region

We try to explain the short-range repulsive force between surfaces as a consequence of a decrease in the configurational entropy of liquid molecules in the gap region as the width of the gap decreases. A simple model shows that the density has an oscillating variation when the surfaces are pushed towards each other. As a consequence, an oscillating repulsive force appears between the macroscopic surfaces, which is the result of a loss of configurational freedom of the liquid molecules because of their orientation in the gap. Received: 14 August 2000 Accepted: 30 January 2001     

Mechanical and physico-chemical characterization of cyclodextrin finished polyamide fibers

We present the study of the cyclodextrin (CDs) finishing of polyamide fibers (PA) by means of citric acid (CTR) as crosslinking agent. We observed that the mode of grafting happened by the formation of a crosslinked polymer formed between CTR and CDs. This polymer physically adhered to the fibers network and was resistant to hot water washings. Modified fibers were characterized by evaluating the contact angle with a polar liquid and by studying the hysteresis of damping of PA fibers (Cahn balance) with various grafting rates and by studying the absorptivity of grafted fabrics via the technique of the posed drop (Digidrop^® instrument). Then a mechanical characterization of the PA fabrics grafted with various proportions of CDs was accomplished, by traction and tear tests by using a tensile-test bench Lohmergy. Finally a topographic study of PA grafted surfaces was approached by atomic force microscopy (AFM and LFM; contact and non-contact mode) which permitted to evaluate the roughness and the chemical heterogeneity of the grafted surfaces.     

Zirconium(IV)-porphyrins as novel ionophores for fluoride-selective polymeric membrane electrodes

The feasibility of using Zr(IV)-porphyrins as novel ionophores for preparing anion-selective polymeric membrane electrodes is examined. Electrodes constructed using o-nitrophenyl octyl ether plasticized poly(vinyl chloride) membranes containing Zr(IV)-octaethylporphyrin (OEP) dichloride (Zr(IV)[OEP]Cl₂) or Zr(IV)-tetraphenylporphyrin (TPP) dichloride (Zr(IV)[TPP]Cl₂) were found to exhibit enhanced potentiometric selectivity toward fluoride compared to electrodes based on a typical anion-exchanger (e.g. tridodecylmethylammonium chloride). At pH 5.5, the electrodes displayed the following selectivity sequences: ClO₄⁻ > SCN⁻ > I⁻ > F⁻ > NO₃⁻ > Br⁻ > NO₂⁻ > Cl⁻ and F⁻ > ClO₄⁻ > SCN⁻ > I⁻ > NO₂⁻ > NO₃⁻ > Br⁻ > Cl⁻ for membranes doped with Zr(IV)[OEP]Cl₂) and Zr(IV)[TPP]Cl₂, respectively. Both ionophores are shown to operate via a charged carrier mechanism, with 10 mol% of lipophilic tetraphenylborate derivative in the membrane phase required to achieve optimal selectivity. Electrodes prepared with both metalloporphyrin species display super-Nernstian response toward fluoride with slopes typically greater than −100 mV per decade. It is shown, via UV-VIS spectroscopy of the membrane phase, that this behavior occurs due to spontaneous formation of hydroxide ion bridged porphyrin dimers in the membrane in the presence of the lipophilic anionic additive. The dimers are easily converted to monomeric species upon increasing the concentration of fluoride in the sample solution. Decreasing the pH of sample buffer background solution (from pH 5.5 to pH 3) decreases the lower detection limit (DL) of the electrode response toward fluoride (by two-order of magnitude) and improves the electrodes’ selectivity.     

Renewable-surface sol-gel derived carbon ceramic electrode fabricated by [Ru(bpy)(tpy)Cl]PF6 and its application as an amperometric sensor for sulfide and sulfur oxoanions

A highly sensitive and fast responding sensor for the determination of thiosulfate, sulfite, sulfide and dithionite is described. It consists of a chemically modified carbon ceramic composite electrode (CCE) containing [Ru(bpy)(tpy)Cl]PF6 complex that was constructed by the sol-gel technique. A reversible redox couple of Ru(II)/Ru(III) was observed as a solute in acetonitrile solution and as a component of carbon based conducting composite electrode. Electrochemical behavior and stability of modified CCE were investigated by cyclic voltametry, the apparent electron transfer rate constant (kappa(S)) and transfer coefficient (a) were determined by cyclic voltametry which were about 28 s(-1) and 0.43 respectively. Electrocatalytic oxidation of S(2-), SO3(2-), S2O4(2-) and S2O3(2-) were effective at the modified electrode at significantly reduced overpotentials and in the pH range 1-11. Optimum pH values for amperometric detection of thiosulfate, dithionite, sulfide and sulfite are 7, 9, 2 and 2. Under the optimized conditions the calibration curves are linear in the concentration ranges 1-500, 3-80, 2-90 and 1-100 microM for S2O3(2-), SO3(2-), S2- and S2O4(2-) determination. The detection limit (signal to noise is 3) and sensitivity are 0.5 and 12, 2.8 and 6, 1.6 and 8, and 0.65 microM and 80 nA microM(-1) for thiosulfate, sulfite, sulfide and dithionite detection. The modified carbon ceramic electrode doped with Ru-complex shows good reproducibility, a short response time (t < 2 s), remarkable long term stability (> 6 month) and especially good surface renewability by simple mechanical polishing (RSD for eight successive polishing is 2%). The advantages of this sulfur compound amperometric detector based on ruthenium doped CCE are high sensitivity, inherent stability at a broader pH range, excellent catalytic activity, less expense and simplicity of preparation in comparison with recently published papers. This sensor can be used as a chromatographic detector for analysis of sulfur derivatives.     

Novel species in the electrochemical reduction of a metalmetal bond bridged by a bidentate fluorophosphine

The purple bridged bimetallic complex [CH₃N(PF₂)₂]₃Co₂(CO)₂ undergoes successive chemically and electrochemically reversible one-electron reductions to the corresponding green radical anion and pale-yellow dianion. The radical anion is relatively unreactive towards oxygen and methyl iodide. The dianion is not only reactive towards oxygen and methyl iodide but also captures small positively charged species (e.g. Li⁺ and H⁺) with significant alteration of its chemical properties.     

The use of Omega Chrome Fast Blue 2G in the microdetermination of some metals

Summary Omega Chrome Fast Blue 2G has been found to be a suitable indicator for the detection of the equivalence point of calcium, magnesium and manganese in the presence of cadmium, nickel, and aluminium, when they are masked by the addition of cyanide or triethanolamine. It is also a suitable indicator for the back titration of aluminium using calcium or magnesium as a back titrant.This dye has also been found to be a suitable reagent for the colorimetric determination of calcium, magnesium, manganese and thorium.