A novel synthesis, including asymmetric synthesis, of α-quaternary α-amino acid methyl esters from ketones via sulfinyloxiranes

Sulfinyloxiranes were synthesized from ketones and chloromethyl p-tolyl sulfoxide in two steps in almost quantitative yields. The sulfinyloxiranes were treated with NaN₃ in the presence of NH₄Cl to afford α-azido aldehydes, which were oxidized with iodine in the presence of KOH in methanol to give α-azido methyl esters in good overall yields. Catalytic hydrogenation of the α-azido esters afforded α-quaternary α-amino acid methyl esters in quantitative yields. Starting from β-tetralone and optically pure (R)-chloromethyl p-tolyl sulfoxide, an asymmetric synthesis of optically pure (R)-(+)-methyl 2-aminotetraline-2-carboxylate was realized in good overall yields.     

Effect of alcohols on the gamma-radiation-induced polymerization of ethylene

Gamma-radiation-induced polymerization of ethylene in alcohols such as methyl, ethyl, n-propyl, isopropyl, n-butyl, isobutyl, sec-butyl, tert-butyl, and n-pentyl alcohols was carried out under a pressure of 400 kg./cm.²at 30°C. at a dose rate of 1.4 × 10⁵ rad/hr. in a batch reactor of 100 ml. capacity. The yield and molecular weight of polymer formed in the alcohols (except tert-butyl alcohol) were much lower than those of the bulk polymerization under the same conditions, whereas the addition of tert-butyl alcohol increased the yield and reduced the molecular weight. From the infrared spectra of the polymers and those of the bromination products it was concluded that only primary OH exists in the polymer formed in methyl alcohol and that both primary and secondary OH are in the polymer formed in other primary alcohols. Both secondary and tertiary OH were observed in the polymer when the secondary alcohols were used, and only tertiary OH in the case of tert-butyl alcohol. These polymers were found to contain small amounts of vinylidene unsaturation and methyl group. On the basis of these results the roles of the alcohols in the polymerization are discussed.     

Quantum algebraic–combinatoric study of the conformational properties of n‐alkanes. I

Based on quantum chemical calculation results, four rules were previously derived for the numbers and the sequences of the conformers of free alkane molecules. This paper builds up first an algebra to handle the conformational problem of alkanes. Partitioning the set of all sequences, the whole problem is then subdivided into three independent subcases. With the help of an equivalence relation, the sequences can be classified. According to the quantum chemical rules, certain equivalence classes do not represent conformers. A welldefined subcase of the whole problem is solved.     

General synthesis and structural evolution of a layered family of Ln8(OH)20Cl4 x nH2O (Ln = Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, and Y)

The synthesis process and crystal structure evolution for a family of stoichiometric layered rare-earth hydroxides with general formula Ln(8)(OH)(20)Cl(4) x nH(2)O (Ln = Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, and Y; n approximately 6-7) are described. Synthesis was accomplished through homogeneous precipitation of LnCl(3) x xH(2)O with hexamethylenetetramine to yield a single-phase product for Sm-Er and Y. Some minor coexisting phases were observed for Nd(3+) and Tm(3+), indicating a size limit for this layered series. Light lanthanides (Nd, Sm, Eu) crystallized into rectangular platelets, whereas platelets of heavy lanthanides from Gd tended to be of quasi-hexagonal morphology. Rietveld profile analysis revealed that all phases were isostructural in an orthorhombic layered structure featuring a positively charged layer, [Ln(8)(OH)(20)(H(2)O)(n)](4+), and interlayer charge-balancing Cl(-) ions. In-plane lattice parameters a and b decreased nearly linearly with a decrease in the rare-earth cation size. The interlamellar distance, c, was almost constant (approximately 8.70 A) for rare-earth elements Nd(3+), Sm(3+), and Eu(3+), but it suddenly decreased to approximately 8.45 A for Tb(3+), Dy(3+), Ho(3+), and Er(3+), which can be ascribed to two different degrees of hydration. Nd(3+) typically adopted a phase with high hydration, whereas a low-hydration phase was preferred for Tb(3+), Dy(3+), Ho(3+), Er(3+), and Tm(3+). Sm(3+), Eu(3+), and Gd(3+) samples were sensitive to humidity conditions because high- and low-hydration phases were interconvertible at a critical humidity of 10%, 20%, and 50%, respectively, as supported by both X-ray diffraction and gravimetry as a function of the relative humidity. In the phase conversion process, interlayer expansion or contraction of approximately 0.2 A also occurred as a possible consequence of absorption/desorption of H(2)O molecules. The hydration difference was also evidenced by refinement results. The number of coordinated water molecules per formula weight, n, changed from 6.6 for the high-hydration Gd sample to 6.0 for the low-hydration Gd sample. Also, the hydration number usually decreased with increasing atomic number; e.g., n = 7.4, 6.3, 7.2, and 6.6 for high-hydration Nd, Sm, Eu, and Gd, and n = 6.0, 5.8, 5.6, 5.4, and 4.9 for low-hydration Gd, Tb, Dy, Ho, and Er. The variation in the average Ln-O bond length with decreasing size of the lanthanide ions is also discussed. This family of layered lanthanide compounds highlights a novel chemistry of interplay between crystal structure stability and coordination geometry with water molecules.     

Photodegradation mechanisms in poly(2,6-butylenenaphthalate-co-tetramethyleneglycol) (PBN-PTMG), Part III: Photodegradation induced by the carbonyl group in n, π excited states

In order to identify the initiation step in the photodegradation of poly(2,6-butylenenaphthalate)-block-poly(tetramethyleneglycol) (PBN-PTMG), we undertook its photolysis with monochromatic irradiation. We discuss the initiation reaction on the basis of the analytical results for the PBN-PTMG in the presence or absence of 2,2′-dihydroxy-4-methoxybenzophenone as a UV absorber, 2-hydroxy-4-methoxybenzophenone as a UV absorber, β-carotene as a quencher of singlet oxygen or methylene blue as a photosensitiser, respectively.The PBN-PTMG containing 2,2′-dihydroxy-4-methoxybenzophenone exhibits better resistance to the incident light of ca. 370 nm corresponding to the absorption of the n, π^* transition of the carbonyl group in the PBN block than the PBN-PTMG containing 2-hydroxy-4-methoxybenzophenone. The PBN-PTMG containing β-carotene shows similar photodegradation tendencies as that of the PBN-PTMG without β-carotene. In contrast, the PBN-PTMG with methylene blue is not degraded by monochromatic radiation in the range λ = 600-690 nm. These facts indicate that singlet oxygen does not participate in the initiation reaction of the photodegradation of the PBN-PTMG. Therefore, we concluded that the photodegradation of the PBN-PTMG is induced through the hydrogen abstraction by carbonyl groups in n, π^* excited states.     

Natural Sphingomonas glycolipids vary greatly in their ability to activate natural killer T cells

Mouse natural killer T (NKT) cells expressing an invariant T cell antigen receptor (TCR) recognize glycosphingolipids (GSLs) from Sphingomonas bacteria. The synthetic antigens previously tested, however, were designed to closely resemble the potent synthetic agonist alpha-galactosyl ceramide (alphaGalCer), which contains a monosaccharide and a C18:0 sphingosine lipid. Some Sphingomonas bacteria, however, also have oligosaccharide-containing GSLs, and they normally synthesize several GSLs with different sphingosine chains including one with a cyclopropyl ring-containing C21:0 (C21cycl) sphingosine. Here we studied the stimulation of NKT cells with synthetic GSL antigens containing natural tetrasaccharide sugars, or the C21cycl sphingosine. Our results indicate that there is a great degree of variability in the antigenic potency of different natural Sphingomonas glycolipids, with the C21cycl sphingosine having intermediate potency and the oligosaccharide-containing antigens exhibiting limited or no stimulatory capacity.     

General and simple approach for control cage and cylindrical mesopores, and thermal/hydrothermal stable frameworks

Highly ordered cage and cylindrical mesoporeous silica monoliths (HOM) with 2- and 3-dimensional (2D and 3D, respectively) structures, mesopore/micropore volumes, and thick-walled frameworks were successfully fabricated by instant direct templating of lyotropic phases of copolymer (EO(m)-PO(n)-EO(m)) surfactants. Large cage-like pores with uniform constriction sizes up to 10 nm and open cylindrical channel-like mesopores can be easily achieved by this simple and efficient synthesis design. Our results show that the cage-like pores could be fabricated at relatively lower copolymer concentrations used in the lyotropic phase domains at copolymer/TMOS ratios of 35 wt %. These ordered cage pore architectures underwent transition to open-cylindrical pores by increasing the copolymer concentration. High EO/PO block copolymers, in general, were crucially affected on the increase of the interior cavity sizes and on the stability of the cage mesopore characters. However, for F108 (EO(141)PO(44)EO(141)) systems, the fabrication of ordered and stable cage pore monoliths was achieved with significantly higher copolymer concentrations up to 90 wt %. Interestingly, the effective copolymer molecular nature was also observed in the ability to design various ordered mesophase geometries in large domain sizes. Our findings here show evidence that the synthetic strategy provides realistic control over a wide range of mesostructured phase geometries and their extended long-range ordering in the final replicas of the silica monolith frameworks. In addition, the HOM silica monoliths exhibited considerable structural stability against higher thermal temperature (up to 1000 degrees C) and longer hydrothermal treatment times under boiling water and steam. The remarkable structural findings of 3D frameworks, transparent monoliths, and micropores combined with large cage- and cylindrical-like mesopores are expected to find promising uses in materials chemistry.     

Fresnel diffraction mirror for an atomic wave

We have experimentally demonstrated a material-independent mirror for atomic waves that uses the Fresnel diffraction at an array of parallel ridges. He* (2 (3)S(1)) and Ne* (1s(3)) atomic waves were reflected coherently on a silicon plate with a microfabricated grating structure, consisting of narrow wall-like ridges. We measured the reflectivity at grazing incidence as a function of the incident velocity and angle. Our data show that the reflectivity on this type of mirror depends only on the distance between the ridges, the wavelength, and the incident angle, but is insensitive to the material of the grating structure. The reflectivity is observed to increase by 2 orders of magnitude, compared to that of a flat polished silicon surface, where the reflection is caused by the attractive surface potential. For He* atoms, the measured reflectivity exceeds 10% for normal incident velocities below about 25 cm/s.     

Novel synthesis of 2,3-diarylbuta-1,3-dienes from 1,4-dimethoxybutyne-2

It was found that 2,3-diarylbuta-1,3-dienes were readily obtained in good to excellent yields through the S_N-2′ type substitution of 1,4-dimethoxybutyne-2 with aryl Grignard reagents in the presence of a copper(I) salt.     

Preparation, Characterization and Nonlinear Optical Properties of One-Dimensional Tetranuclear Platinum Complex/Alumina Composite Films

The preparation of transparent films consisting of one-dimensional tetranuclear platinum complex and an alumina gel was attempted. Characterization of the composite films obtained was performed by UV-Vis-NIR spectroscopy. From the redox behavior of the complex in films, it was confirmed that the complex maintains the tetranuclear structure in the alumina gel, when the content of the complex is low. However, it seems to turn into another complex with a longer platinum chain, as the content of complex in the gel increases. The third-order nonlinear susceptibility (³) values of composite films was estimated from the third harmonic generation (THG) Maker-fringe measurements of this preliminary study.