Synthesis and pharmacological activity of 4-amino-5-chloro-2-methoxy-N-[(2S,4S)-1-ethyl-2-hydroxymethyl-4- pyrrolidinyl]benzamide (TKS159) and its optical isomers

Of 4-amino-5-chloro-2-methoxy-N-(1-ethyl-2-hydroxymethyl-4- pyrrolidinyl)benzamide, four optical isomers, (2S,4S)-1 (TKS159), (2S,4R)-25, (2R,4S)-26 and (2R,4R)-27, were prepared from optically active 4-amino-1-ethyl-2-hydroxymethylpyrrolidine di-p-toluenesulfonate [(2S,4S)-14, (2S,4R)-17, (2R,4S)-20 and (2R,4R)-23, respectively]. The requisites, (2S,4S)-14, (2S,4R)-17, (2R,4S)-20 and (2R,4R)-23, were prepared from a commercially available trans-4-hydroxy-L-proline. The absolute configurations of (2S,4S)-1 (TKS159), (2S,4R)-25, (2R,4S)-26 and (2R,4R)-27 were spectroscopically determined. Of the benzamide derivatives, four optical isomers, (2S,4S)-1, (2S,4R)-25, (2R,4S)-26 and (2R,4R)-27, showed a relatively potent affinity for 5-hydroxytryptamine 4 (5-HT4) receptors in a radioligand binding assay ([3H]GR113808). The activities of 25-27 were less effective than that of 1 for the gastric emptying of a phenol red semisolid meal in rats. All this suggests that the most potent of the isomers was 4-amino-5-chloro-2-methoxy-N-[(2S,4S)-1-ethyl-2- hydroxymethyl-4-pyrrolidinyl]benzamide (1).     

Fluorescent Molecular Recognition and Sensing System of Bis-Dansyl Modified γ-Cyclodextrins

Flexible hosts, 6A,6B-; 6A,6C-; 6A,6D-; and 6A,6E-bis dansylglycine-modified -cyclodextrins (-1, -2, -3, and -4, respectively) have been synthesized as a sensing molecule for organic guests including terpenoids and bile acids. These host compounds show a pure monomer fluorescence whose intensity is decreased or enhanced upon addition of guest species. The value I/I₀, where I and I₀ are fluorescence intensities in the presence and absence of a guest and I is I₀- I, was used as a parameter of sensitivity. These hosts exhibit highly sensitive and selective molecular recognition ability, particularly, for lithochoic acid, chenodeoxycholic acid, and ursodeoxycholic acid. The behaviors of the appended moieties of these hosts when host–guest complexation occurs are studied by induced circular dichroism (ICD) spectra and fluorescence spectral change on accommodation of a guest. The ICD pattern of these hosts alone or on accommodation of a guest is very similar, indicating that the behavior of the appended moieties are very similar. The guest-induced variations in the fluorescence or ICD intensity suggest that the appended moieties act as a hydrophobic cap that enables the cyclodextrin to form 1 : 1 host–guest complexes.     

Synthesis, crystal structure and thermoelectric properties of a new carbide Zr2[Al3.56Si0.44]C5

A new quaternary layered carbide, Zr₂[Al_3.56Si_0.44]C₅, has been synthesized and characterized by X-ray powder diffraction, transmission electron microscopy and thermopower and electrical conductivity measurements. The crystal structure was successfully determined using direct methods, and further refined by the Rietveld method. The crystal is trigonal (space group R3m, Z=3) with lattice dimensions of a=0.331059(5), c=4.09450(5) nm and V=0.38864(1) nm³. The final reliability indices calculated from the Rietveld refinement were R_wp=6.24%, R_p=4.21% and R_B=0.82%. The crystal structure is composed of electroconductive NaCl-type ZrC slabs separated by Al₄C₃-type [Al_3.56Si_0.44]C₃ layers. This material had thermoelectric properties superior to those of the ternary layered carbides Zr₂Al₃C₄ and Zr₃Al₃C₅, with the power factor reaching 7.6×10⁻⁵W m⁻¹ K⁻².     

Mechanism of thermal decomposition of peroxide radicals formed in polytetrafluoroethylene by γ-ray irradiation

Thermal decomposition of polymer peroxide radicals formed in γ-irradiated polytetrafluoroethylene, ～CF₂CF(OO·)CF₂～ (radical I) and ～CF₂CF₂(OO～) (radical II), was studied by mass spectral analysis of the gas evolved in comparison with their photolysis with ultraviolet light. In the thermal decomposition of radicals I and II, CO₂ was the most abundant component, with smaller amount of CO, CF₂O, and gases present. In the photolysis, CO instead of CO₂ was the most abundant in the case of radical I, while in the case of radical II, CO₂ was again the main product. When a labeled polymer peroxide radical, ～CF₂CF(¹⁸O-¹⁸O·)CF₂～, was treated with heat or ultraviolet light, C¹⁸O¹⁶O was detected as a main component. In the treatment with ultraviolet light, a large amount of C¹⁸O comparable to that of C¹⁸O¹⁶O was also obtained. The mechanism of main-chain scission of radicals I and II is discussed.     

Kinetics of the γ-radiation-induced polymerization of ethylene in liquid carbon dioxide

The γ-radiation-induced polymerization of ethylene with the use of liquid carbon dioxide as a solvent, was studied from the viewpoint of kinetics. The polymerization was carried out at conversions less than 10% under the pressure ranging from 100 to 400 kg./cm.², dose rates 1.3 × 10⁴?1.6 × 10⁵ rad/hr., and temperatures of 20–90°C. The concentration of carbon dioxide varied up to 84.1 mole-%. The polymerization rate and the polymer molecular weight were observed to increase with reaction time. This observation, however, becomes less pronounced with increasing concentration of carbon dioxide and with rising temperature. The exponents of the pressure and the dose rate were determined to be 2.3 and 0.85 for the rate, and 2.0 and ?0.20 for the molecular weight, respectively. From the kinetic considerations for these results, the effect of carbon dioxide on the initiation and termination reaction in the polymerization was evaluated.     

TEMPO/NaBr/NaClO and NaBr/NaClO oxidations of cotton linters and ramie cellulose samples

Dried cotton linters and ramie cellulose samples were oxidized with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)/NaBr/NaClO and NaBr/NaClO (i.e., TEMPO-free) in water at pH 10. The carboxy contents, degrees of polymerization (DPs), X-ray diffraction patterns, and solid-state ¹³C NMR spectra were measured or obtained for the oxidized products with and without subsequent NaBH₄ reduction. Cellulose nanofibrils were prepared from the oxidized cellulose samples by sonication in water and observed by atomic force microscopy and transmission electron microcopy. Because the cellulose molecules were depolymerized with NaBr/NaClO, the depolymerization behavior of the cellulose samples with TEMPO/NaBr/NaClO can be mainly explained by depolymerization with NaBr/NaClO (i.e., not TEMPO-related compounds or reactions). However, because C6-aldehydes formed in the disordered regions periodically present along the longitudinal direction of each cellulose microfibril, the viscosity-average DP values of the TEMPO/NaBr/NaClO-oxidized cellulose samples decreased to 200–300, while those with subsequent NaBH₄ reduction exhibited much higher DP values. The nanofibrils prepared from the TEMPO/NaBr/NaClO-oxidized cellulose samples had smallest fibril heights or widths of 5–6 nm. However, significant amounts of unfibrillated bundles with heights of 10–40 mm were present in the nanofibril/water dispersions. The high carboxy contents of the TEMPO/NaBr/NaClO-oxidized cellulose samples (1.62–1.63 mmol/g) indicated that significant amounts of carboxy groups were likely present in the disordered regions, probably forming tail-like polyglucuronate chains. Solid-state ¹³C NMR analysis revealed that some of the glucosyl units originally with the tg C6–OH conformation were transformed to other conformations by TEMPO/NaBr/NaClO oxidation, while the crystalline C4 signal areas remained constant.

Graphic abstract

     

Synthesis of Unsymmetrical Tetrathiafulvalene Derivatives via Me(3)Al-Promoted Reactions of Organotin Compounds with Esters

Efficient synthetic methods for the construction of a wide variety of unsymmetrical tetrathiafulvalenes (TTFs) via the Me(3)Al-promoted reactions of organotin thiolates or selenolates with esters are described. Reaction of tin thiolates (3a-c and 10) and selenolates (3d, 5, and 7) with esters (11a,b) in the presence of Me(3)Al as a Lewis acid gave dihydrotetrathiafulvalene derivatives (12, 14, 15, and 17-20) and 1,3-dithiane derivatives (13 and 16). In addition, the synthesis of diselenadithiafulvalene derivatives (25-28) could be accomplished by Me(3)Al-mediated reaction of tin thiolate (2a) or selenolates (3d and 5) with esters (22a, 22d, and 24). Furthermore, the application of the Me(3)Al-promoted reaction of tin thiolate (34) with esters (11a-b, 22a-d, and 35a-b) for the synthesis of unsymmetrical TTFs-fused donors enabled us to obtain various TTFs-fused systems (29-33) in short steps.     

The uniqueness for minimal surfaces inS 3

We give a sufficient condition on a Jordan curve in the 3-dimensional open hemisphereH ofS ³ in terms of the Hopf fibering under which spans a unique compact generalized minimal surface inH. The maximum principle for minimal surfaces inS ³ is proved and plays an important role in the proof of the uniqueness theorem.Dedicated to Professor Shingo Murakami on his 60th birthdayThis work was carried out while the author was a visitor to the Max-Planck-Institut für Mathematik.     

Preparation of composite fine particles by heterocoagulation

To prepare regular composite particles comprised of organic and inorganic compounds, based on heterocoagulation theory, the properties of the mixture of small amphoteric latices (2a=250 nm) and large spherical silica (2a=240–1590 nm) were investigated as a function of pH, particle number ratio, particle size ratio and electrolyte concentration in the medium. It is apparent that under suitable conditions, we may prepare a stable mixed suspension comprising uniform composite particles, which are made up of many latices regularly adsorbed on silica surfaces, and each composite particle is undergoing Brownian motion as an isolated unit. This new composite particle is very stable for electrolyte, base and acid medium, and its surface charges (sign and magnitude) can be controlled by changing the pH of the medium.