Design and synthesis of novel type somatostatin analogs with antiproliferative activities on A431 tumor cells

It was reported that the somatostatin analog TT-232, d-Phe-c(Cys-Tyr-d-Trp-Lys-Cys)-Thr-NH₂, exhibited a highly potent antitumor activity in vitro and in vivo. Using pyrazinone analogs and aliphatic amino acids instead of the disulfide bond, we prepared novel type somatostatin analogs including the sequence essential for antitumor activities, Tyr-d-Trp-Lys. These analogs exhibited antiproliferative effect on A431 tumor cells.     

Kinetic study of the electron-transfer oxidation of the phenolate anion of a vitamin E model by molecular oxygen generating superoxide anion in an aprotic medium

Electron-transfer reduction of molecular oxygen (O2) by the phenolate anion (1-) of a vitamin E model, 2,2,5,7,8-pentamethylchroman-6-ol (1H), occurred to produce superoxide anion, which could be directly detected by a low-temperature EPR measurement. The rate of electron transfer from 1- to O2 was relatively slow, since this process is energetically unfavourable. The one-electron oxidation potential of 1- determined by cyclic voltammetric measurements is sufficiently negative to reduce 2,2-bis(4-tert-octylphenyl)-1-picrylhydrazyl radical (DOPPH*) to the corresponding one-electron reduced anion, DOPPH-, suggesting that 1- can also act as an efficient radical scavenger.     

Extensive investigations on oxidized amino acid residues in H(2)O(2)-treated Cu,Zn-SOd protein with LC-ESI-Q-TOF-MS, MS/MS for the determination of the copper-binding site

The ESI (electrospray ionization)-Q-TOF (tandem quadrupole/orthogonal-acceleration time-of-flight) mass spectrometer combined with the nano-HPLC (high performance liquid chromatography) system was utilized to pinpoint the Cu-binding site in Cu,Zn-SOD (superoxide dismutase) protein. Cu,Zn-SOD was treated with hydrogen peroxide, intended to specifically oxidize histidine residues coordinated to the copper ion as a mass spectrometric probe. The oxidized Cu,Zn-SOD was then fragmented with the successive treatment of endoproteinase Asp-N and DTT (dithiothreitol). Separation of the peptide mixture with the nano-HPLC and the on-line ESI-Q-TOF MS analysis revealed that only two peptide fragments were oxidized to a significant extent. Further analyses of oxidized peptide fragments with LC-ESI-Q-TOF-MS/MS disclosed that three out of four Cu-coordinated histidine residues were specifically oxidized by action of a redox-active copper ion and hydrogen peroxide, demonstrating the copper-catalyzed oxidation of amino acid ligands could be a versatile tool for the mass spectrometric determination of the copper-binding site. In addition, proline and valine residues in the proximity of the Cu ion were found to be oxidized upon H(2)O(2) treatment.     

Crystal Structure, Electric and Magnetic Properties of Layered Cobaltite β-NaxCoO2

The layered oxide thermoelectric material β-Na_0.67CoO₂ has been studied by powder neutron diffraction, electric and magnetic measurements. This compound includes an edge-sharing CoO₆ slab and a highly vacant Na⁺ sheet in a unit cell (space group symmetry C2/m, a=4.9023(4) Å, b=2.8280(2) Å, c=5.7198(6) Å and β=105.964(6)° at 300 K). The evaluated formal valence of cobalt ion, +3.33(1), is ascribed to the coexistence of Co³⁺ and Co⁴⁺ in the ratio 2:1. Polycrystalline β-Na_0.67CoO₂, a p-type thermoelectric material, exhibits metallic behavior of the electric resistivity below 300 K. The Curie-Weiss-type magnetic susceptibility indicates antiferromagnetic interactions between magnetic cobalt ions in the edge-sharing CoO₆ slab.     

Synthesis and pharmacological evaluation of pyrroloazepine derivatives as potent antihypertensive agents with antiplatelet aggregation activity

A series of 1-aminoalkyl-pyrrolo[2,3-c]azepin-8-one derivatives was synthesized and evaluated as alpha 1 adrenergic and serotonin 2 (5-HT2) receptor antagonists, with the aim of finding a novel antihypertensive agent potently exhibiting both activities. Some compounds with a 4-[4-(4-fluorobenzoyl)piperidino]butyl group at the 1-position exhibited both activities, and varied significantly in terms of the substituents at the 4-position of the pyrroloazepine ring. Among the compounds obtained in this study, (E)-1-[4-[4-(4-fluorobenzoyl)piperidino]-butyl]-4-hydroxyimino-7- methyl-1,4,5,6,7,8-hexahydropyrrolo[2,3-c]azepin-8-one (15a, SUN9221) displayed potent alpha 1-adrenergic antagonistic activity (pA2 = 8.89 +/- 0.21) and 5-HT2 antagonistic activity (pA2 = 8.74 +/- 0.22) in isolated guinea pig arteries. This compound exhibited antihypertensive activity and a duration of action equivalent to orally administered prazosin or doxazosin, 3 mg/kg, in conscious spontaneously hypertensive rats, as well as potent antiplatelet aggregation activity.     

Comparative characterization study of microporous carbons by HRTEM image analysis and gas adsorption

The present work presents a useful comparison of micropore size distributions (MPSDs) obtained from gas adsorption and image analysis of high-resolution transmission electron micrographs. It is shown that the MPSD obtained for a chemical activated carbon is concordant with that obtained from CO2 adsorption. In addition, this technique has allowed us to obtain the MPSD of a carbon molecular sieve (CMS) prepared in our laboratory by a copyrolysis process, which could only be characterized by CO2 adsorption at 273 K (not by N2 adsorption at 77 K due to diffusional problems). The MPSD obtained by high-resolution transmission electron microscopy (HRTEM) for the CMS is wider than that obtained by CO2 adsorption, suggesting that HRTEM is detecting the closed porosity existing in this sample, which is not accessible to gas adsorption. The existence of closed porosity in the CMS is explained considering the preparation method used. Thus, HRTEM combined with image analysis seems to be useful for structural analysis of narrow micropores including closed porosity.     

Synthesis of Indolones via Radical Cyclization of N‐(2‐Halogenoalkanoyl)‐Substituted Anilines

The radical reactions of N‐(2‐halogenoalkanoyl)‐substituted anilines (anilides) of type 1 have been investigated under various conditions. Treatment of compounds 1a – 1o with Bu₃SnH in the presence of (2,2′‐azobis(isobutyronitrile) (AIBN) afforded a mixture of the indolones (oxindoles) 2a – 2o and the reduction products 5a – 5o (Table 1). In contrast, the N‐unsubstituted anilides 1p – 1s, 1u , and 1v gave the corresponding reduction products exclusively (Table 1). Similar results were obtained by treatment of 1 with Ni powder (Table 2) or wth Et₃B (Table 3). Anilides with longer N‐(phenylalkyl) chains such as 6 and 7 were inert towards radical cyclization, with the exception of N‐benzyl‐2‐bromo‐N,2‐dimethylpropanamide ( 6b ), which, upon treatment with Ni powder in i‐PrOH, afforded the cyclized product 9b in low yield (Table 4). Upon irradiation, the extended anilides 6, 7, 10 , and 11 yielded the corresponding dehydrobromination products exclusively (Table 5).     

Decarboxylation of α-keto carboxylic acids by persulfoxide

Photosensitized oxygenation of diethyl sulfide in the presence of α-keto carboxylic acids caused oxidative decarboxylation of the acids by persulfoxide and gave carboxylic acids, carbon dioxide, diethyl sulfoxide and diethyl sulfone.     

Output and picosecond amplification characteristics of an efficient and high-power discharge excimer laser

Improvements in output pulse energy and efficiency of a conventional capacitor-transfer-type discharge excimer laser with automatic preionization have been achieved by extending the discharge volume and resulting moderate pumping of the active medium. The discharge laser produces a pulse energy of more than 1 J for XeCl, KrF, and ArF lasers in square beams of about 2×2 cm², and the maximum overall efficiency observed is 2.9% for XeCl, 3.2% for KrF and 1.8% for ArF. The laser device has been involved in a picosecond ( 32 ps) XeCl laser amplification system, and was operated as an amplifier at a repetitive frequency of 10 Hz. Saturation fluence for XeCl laser was measured to be 1.4 mJ/cm², and the picosecond pulse energy of 40 mJ was extracted from the amplifier.On leave from Ebara Corp., 6-6-7, Ginza, Chuo-ku, Tokyo 104, JapanOn leave from Mitsubishi Heavy Industries, LTD., 4-6-22, Kan-on shinmachi, Nishi-ku, Hiroshima 733, Japan