W(CO)5(L)-catalyzed formal cope rearrangement of allenyl silyl enol ethers

[reaction: see text] On treatment of 5-siloxyhexa-1,2,5-trienes with a catalytic amount of W(CO)(6) under photoirradiation, formal Cope rearrangement proceeded to give 2-siloxyhex-1-en-5-ynes in good yield. The electrophilic activation of the allenyl moiety by W(CO)(5) triggers the intramolecular attack of the silyl enol ether in a 6-endo manner to produce a cyclohexenyl tungsten species. Carbon-carbon bond cleavage occurs by electron donation from the anionic W(CO)(5) into the silyloxonium moiety to afford the products with regeneration of the W(CO)(5)(L).     

Studies on steroids. CCXXXXV. Determination of 5 beta-cholestanoic acids in human urine by gas chromatography-mass spectrometry with negative ion chemical ionization detection

A method for the determination of 3 alpha,7 alpha-dihydroxy-5 beta-cholestanoic acid (DHCA) and 3 alpha,7 alpha,12 alpha-trihydroxy-5 beta-cholestanoic acid (THCA) in human urine by gas chromatography (GC) in combination with negative ion chemical ionization (NICI) mass spectrometry is described. Unconjugated, glycine- and taurine-conjugated DHCA and THCA labelled with 18O and 2H were used as internal standards. 5 beta-Cholestanoic acids in urine were extracted with a Sep-Pak C18 cartridge, separated into the unconjugated, glycine- and taurine-conjugated fractions by ion-exchange chromatography on piperidinohydroxypropyl Sephadex LH-20 and, following alkaline hydrolysis of conjugated forms, derivatization into the pentafluorobenzyl ester-dimethylethylsilyl ethers. Subsequent resolution of each fraction into DHCA and THCA was attained by GC on a cross-linked 5% phenylmethylsilicone fused-silica capillary column where 5 beta-cholestanoic acids were monitored with a characteristic carboxylate anion [M-181]- in the NICI mode using isobutane as a reagent gas. The method was applied to separation and determination of 5 beta-cholestanoic acids in urine from a patient with Zellweger syndrome and from healthy volunteers.     

Homoleptic cyclometalated iridium complexes with highly efficient red phosphorescence and application to organic light-emitting diode

Phosphorescence studies of a series of facial homoleptic cyclometalated iridium(III) complexes have been carried out. The complexes studied have the general structure Ir(III)(C-N)(3), where (C-N) is a monoanionic cyclometalating ligand: 2-(5-methylthiophen-2-yl)pyridinato, 2-(thiophen-2-yl)-5-trifluoromethylpyridinato, 2,5-di(thiophen-2-yl)pyridinato, 2,5-di(5-methylthiophen-2-yl)pyridinato, 2-(benzo[b]thiophen-2-yl)pyridinato, 2-(9,9-dimethyl-9H-fluoren-2-yl)pyridinato, 1-phenylisoquinolinato, 1-(thiophen-2-yl)isoquinolinato, or 1-(9,9-dimethyl-9H-fluoren-2-yl)isoquinolinato. Luminescence properties of all the complexes at 298 K in toluene are as follows: quantum yields of phosphorescence Phi(p) = 0.08-0.29, emission peaks lambda(max) = 558-652 nm, and emission lifetimes tau = 0.74-4.7 micros. Bathochromic shifts of the Ir(thpy)(3) family [the complexes with 2-(thiophen-2-yl)pyridine derivatives] are observed by introducing appropriate substituents, e.g., methyl, trifluoromethyl, or thiophen-2-yl. However, Phi(p) of the red emissive complexes (lambda(max) > 600 nm) becomes small, caused by a significant decrease of the radiative rate constant, k(r). In contrast, the complexes with the 1-arylisoquinoline ligands are found to have marked red shifts of lambda(max) and very high Phi(p) (0.19-0.26). These complexes are found to possess dominantly (3)MLCT (metal-to-ligand charge transfer) excited states and have k(r) values approximately 1 order of magnitude larger than those of the Ir(thpy)(3) family. An organic light-emitting diode (OLED) device that uses Ir(1-phenylisoquinolinato)(3) as a phosphorescent dopant produces very high efficiency (external quantum efficiency eta(ex) = 10.3% and power efficiency 8.0 lm/W at 100 cd/m(2)) and pure-red emission with 1931 CIE (Commission Internationale de L'Eclairage) chromaticity coordinates (x = 0.68, y = 0.32).     

Determination of trace amounts of vanadium in air samples with 2-(8-quinolylazo)-5-N,N-diethylaminophenol by reversed-phase liquid chromatography

A reversed-phase liquid chromatographic method for the determination of trace amounts of vanadium is described. Metal ions are converted into 2-(8-quinolylazo)-5-N,N-diethylaminophenol chelates in an off-line system. The chelates are injected onto a Zorbax CN column and separated with an aqueous acetonitrile mobile phase containing no chromogenic reagent. Unter these conditions, only vanadium(V) is spectrophotometrically detected at 540 nm among the metal ions Al(III), Ba(II), Ca(II), Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Ga(III), Hg(II), Mg(II), Mn(II), Ni(II), Pb(II), V(V) and Zn(II). Amounts of 8.0–200 pg of vanadium(V) in 100-μl injections can be determined without interference from 10-fold molar excesses of many cations. At 0.001 a.u.f.s., the detection limit (twice the peak-to-peak noise) for vanadium(V) is 8.0 pg in 100 μl of injected solution and the relative standard deviation at 120 pg of vanadium(V) in a 100-μl injection is 3.5%. The proposed method is applied to the determination of vanadium in rain water and airborne particulates.     

Measurement of density distributions for colloidal beta-FeOOH rods in suspensions exhibiting phase separation: the role of long-range forces in smectic ordering

We prepared monodisperse colloidal beta-FeOOH rods with length-to-width ratios L/W of 3.6-7.0 (L=210-330 nm and W=40-58 nm). Density gradients of the rods occurred in the suspensions by gravity, inducing a phase separation. The denser phase showed smectic (Sm) liquid crystalline structures exhibiting iridescent colors in a wide range of pH from 1.2 (at which the rods interact attractively) to 4.7 (repulsively). The lower density phase was disordered, but frequently emitted diffuse colors locally (at pH>2.6), implying the occurrence of short-range order. The nematic phase was not observed in the beta-FeOOH systems, being consistent with theoretical predictions. The particle density distributions were measured over the whole region of the suspensions (separated into two phases) at various pH values using a rapid freezing method. A phase diagram was determined thereby, where the critical (minimal) packing fraction of the particles for the Sm phase showed a nonlinear decrease from 0.43 to 0.12 with increasing pH. Rod-rod spacings in the Sm phase estimated experimentally at various pH were well explained using Derjaguin-Landau-Verwey-Overbeek (DLVO) type pair potentials. It is suggested that Sm ordering can be induced by attractive minima at pH<2.2, while driven by soft repulsions at pH>2.6. The former Sm ordering is expected to be the condensation-type phase transition and the latter the disorder-order transition.     

1,2-silyl-migrative cyclization of vinylsilanes bearing a hydroxy group: stereoselective synthesis of multisubstituted tetrahydropyrans and tetrahydrofurans(1)

Acid-catalyzed intramolecular addition of a hydroxy group to alpha-alkylated vinylsilanes has been studied. Treatment of (Z)-5-alkyl-5-silyl-4-penten-1-ols 1 (R = alkyl) with 5 mol % TiCl(4) in CHCl(3) gave trans-2-alkyl-3-silyltetrahydropyrans 2 exclusively (trans/cis = >99/1 to 97/3). The cyclization efficiency and rate strongly depended on the geometry of the C-C double bond and the silyl group. The use of (E)-vinylsilanes resulted in lower yields with poor cis-selectivity. In the cyclization of (Z)-1 (R = Bu), the silyl group used, the reaction time, and the yield of 2 were as follows: SiMe(2)Ph, 9.5 h, 75%; SiMe(3), 7.5 h, 66%; SiMePh(2), 24 h, 58%; SiMe(2)-t-Bu, 0.75 h, 85%; SiMe(2)Bn, 1.5 h, 78%. This 1,2-silyl-migrative cyclization could be applied to stereoselective synthesis of trisubstituted tetrahydropyrans. The acid-catalyzed reaction of 1-, 2-, or 3-substituted (Z)-5-silyl-4-nonen-1-ols 8 gave r-2,t-3,c-6-, r-2,t-3,t-5-, or r-2,t-3,c-4-trisubstituted tetrahydropyrans with high diastereoselectivity, respectively. (Z)-4-Alkyl-4-silyl-3-buten-1-ols 5 as well as 1 underwent the 1,2-silyl-migrative cyclization to give 2-alkyl-3-silyltetrahydrofurans 6 with high trans-selectivity. This silicon-directed cyclization was also available for the stereoselective synthesis of tri- and tetrasubstituted tetrahydrofurans.     

Indium-mediated beta-allylation,beta-propargylation,and beta-allenylation onto alpha,beta-unsaturated ketones: reactions of in-situ-generated 3-tert-butyldimethylsilyloxyalk-2-enylsulfonium salts with in-situ-generated organoindium reagents

3-tert-Butyldimethylsilyloxyalk-2-enylsulfonium salts, generated in situ from the reaction of alpha,beta-enones with dimethyl sulfide in the presence of TBSOTf, underwent a novel nucleophilic substitution with allylindiums to give silyl enol ethers of delta,epsilon-alkenyl ketones in good yields, which correspond to formal Michael addition products. In a similar manner, 1,4-propargylation of propargylindiums onto the sulfonium salts produced the corresponding silyl enol ethers of delta,epsilon-alkynyl ketones in good yields. Organoindium reagents derived from gamma-substituted propargyl bromide and indium afforded the corresponding silyl enol ethers of beta-allenyl ketones in good yields. The reaction proceeds via an addition-substitution mechanism involving the formation of allylic sulfonium salts. The presence of the intermediate sulfonium salt was confirmed by observation of the low-temperature (1)H NMR spectra.     

Stereoblock poly(lactic acid): synthesis via solid-state polycondensation of a stereocomplexed mixture of poly(L-lactic acid) and poly(D-lactic acid)

Stereoblock poly(lactic acid) consisting of D- and L-lactate stereosequences can be successfully synthesized by solid-state polycondensation of a 1:1 mixture of poly(L-lactic acid) and poly(D-lactic acid). In the first step, melt-polycondensation of L- and D-lactic acids is conducted to synthesize poly(L-lactic acid) and poly(D-lactic acid) with a medium-molecular-weight, respectively. In the next step, these poly(L-lactic acid) and poly(D-lactic acid) are melt-blended in 1:1 ratio to allow formation of their stereocomplex. In the last step, this melt-blend is subjected to solid-state polycondensation at temperature where the dehydrative condensation is allowed to promote chain extension in the amorphous phase with the stereocomplex crystals preserved. Finally, stereoblock poly(lactic acid) having high-molecular-weight is obtained. The stereoblock poly(lactic acid) synthesized by this way shows a higher melting temperature in consequence of the controlled block lengths and the resulting higher-molecular-weight. The product characterization as well as the optimization of the polymerization conditions is described. Changes in M(w) of stereoblock poly(lactic acid) (sb-PLA) as a function of the reaction time.