Photometric determination of micro amounts of thiosulphate by means of its cyanolysis with lanthanum(III) as catalyst

Lanthanum(III) has been found to catalyse the reaction of thiosulphate with cyanide. The effects of pH, reaction time and temperature, amount of cyanide and lanthanum, and order of addition of reagents have been investigated. Temperature has little effect in the range 10–30°, but at both 35° and 40° the rate is noticeably faster. Reaction is complete at room temperature in 1.5 hr at pH 9.3–9.6, and in 3 hr at pH 9.1–9.6. The method can be applied to the determination of 1.0 × 10⁻⁵−6.0 × 10⁻⁴M thiosulphate, with a relative standard deviation of 0.3% for 4 × 10⁻⁴M thiosulphate.     

Evaluation of the radioactivity in concrete from accelerator facilities

For evaluation of radioactivity induced in the concrete samples from accelerator facilities, the residual radioactivity in concrete sample, collected from seven accelerator facilities, was determined by γ-ray spectrometry. The tritium was extracted by the heating method using an IR furnace, and measured with a liquid scintillation counter. It was found that the major radioisotopes activated mainly by neutrons in the concrete samples were ¹⁵²Eu, ⁶⁰Co, ¹³⁴Cs and ³H. The concentrations of radioactivities induced by thermal neutron capture are the highest at a depth of 10 cm in the concrete wall. The correlation between tritium, ⁶⁰Co and ¹⁵²Eu activity was investigated by measuring many concrete samples for seven accelerator facilities. The results indicate that their activities are strongly correlated with each other. So it would also be concluded that the total activity in shielding concrete could be estimated on the basis of the activities of ⁶⁰Co and ¹⁵²Eu.     

Novel ring transformation reactions of xanthine derivatives

The novel ring transformation reactions were found in the reactions of 1,3,7,9-tetra-alkyl-8,9-dihydroxanthines and acetylenic compounds. The reaction of the dihydroxanthine with DMAD gave a propellane type compound and with methyl propiolate afforded the similar type compound and a pyrimido[4,5-b]diazepine derivative. The mechanism of these reactions was also discussed.     

Interaction of pentoxifylline with human erythrocytes. III. Comparison of fluidity change of erythrocyte membrane caused by S-adenosyl-L-methionine with that by pentoxifylline

The change in fluidity by adding pentoxifylline to erythrocyte membranes was compared with that caused by S-adenosyl-L-methionine (SAM) by the method of electron spin resonance (ESR) spectroscopy. When SAM or pentoxifylline was added externally to the erythrocyte suspension (outside), the fluidity of the membrane bilayer was increased after incubation at 37 degrees C. However, the fluidity change in the inner part of the bilayer was relatively small compared to that in its outer part. These fluidity changes were dependent on the incubation time and the temperature. When the erythrocyte suspension was preincubated overnight at 4 degrees C in the presence of drugs (inside), the fluidity of the inner part of the membrane changed significantly. Nevertheless, that of the outer part of the lipid bilayer was not affected. Such an asymmetric fluidity change in the lipid bilayer was not observed by the addition of other xanthine derivatives such as caffeine, theophylline and theobromine. S-Adenosyl-L-homocysteine suppressed and MgCl2 enhanced the increase of the membrane fluidity by SAM or pentoxifylline. Furthermore, the effects of SAM and pentoxifylline on erythrocyte deformability were determined by a filtering technique method. In increasing order the additive effects of SAM and pentoxifylline on the erythrocyte filterability were SAM (outside) less than pentoxifylline (inside) less than pentoxifylline (outside) less than SAM (inside). These results suggest that pentoxifylline also affects the membrane fluidity through the enzymatic methylation of phospholipids.     

Protective effects of small amounts of bis(2-ethylhexyl)sulfosuccinate on the helical structures of human and bovine serum albumins in their thermal denaturations

The protective effect of an anionic double-tailed surfactant, sodium bis(2-ethylhexyl)sulfosuccinate (AOT), on the structures of human serum albumin (HSA) and bovine serum albumin (BSA) in their thermal denaturations was examined by means of circular dichroism measurements. The structural changes of these albumins were reversible in the thermal denaturation below 50 degrees C, but became partially irreversible above this temperature. The effect was observed in the thermal denaturation above 50 degrees C. Although the helicity of HSA decreased from 66% to 44% at 65 degrees C in the absence of the surfactant, the decrement of it was restrained in the coexistence of AOT of extremely low concentrations. When the HSA concentration was 10 muM, the maximal protective effect appeared at 0.15 mM AOT. In the coexistence of the surfactant of this concentration, the helicity was maintained at 58% at 65 degrees C, increasing to the original value upon cooling to 25 degrees C. Beyond 0.15 mM AOT, the helicity sharply decreased until 3 mM AOT. A particular AOT concentration required to induce the maximal protective effect ([AOT]REQ) was examined at different HSA concentrations. [AOT]REQ shifted to higher values with an increase of the protein concentration. From the protein concentration dependences of [AOT]REQ, the maximal protection was estimated to require 8.0 and 5.0 AOT ions per a molecule of HSA and BSA, respectively. The AOT concentration, where the protective effect was observed, was too low to form its micelle-like aggregate. Then the protein structures might be stabilized by a cross-linking of surfactant monomers bound to specific sites. These specific sites might exist between a group of nonpolar residues and a positively charged residue located on several sets of amphiphilic helical rods in the proteins. Such a unique function of the double-tailed ionic surfactant is first presented by its characteristic nature as an amphiphilic material.     

Determination of the change of nuclear charge radius of the119Sn Mössbauer transition by internal conversion

Radioactive¹¹⁹Sb was implanted into six host matrices (CaSnO₃, Pt, Y, Au,-Sn, Pb) and internal conversion electrons of the 23.87 keV transition in¹¹⁹Sn were measured with an iron-free magnetic spectrometer as well as Mössbauer spectra. In the analysis of the conversion spectra of outermost electrons, the overlapping K-LM Auger lines were subtracted using the Auger spectrum of tin measured with another source of^117mSn, and the shake-off effect accompanying the conversion process was considered. From the correlation between the Mössbauer isomer shifts and the intensity ratios of O-shell to N₁-shell conversion electrons, the change of the nuclear charge radius of the 23.87 keV transition of¹¹⁹Sn was deduced to be R/R=(0.87 ± 0.25) × 10^–4 for a uniform charge distribution ofR= 1.2 ×A ^1/3 fm or, equivalently, r²>—=(3.6 ± 1.0) ×10^–3 fm².     

Synthesis of nitrogen-containing heterocycles. 8. Preparation and ring-opening of spiro[cycloalkane-[1′,2′,4′]triazolo[1′,5′-c]pyrimidine] derivatives

Diaminomethylene- and aminomethylthiomethylenehydrazones [2] of cyclic ketones 1–8 readily reacted with ethoxymethylenemalononitrile to give spiro[cycloalkane-1,2′-[1,2′,4′]triazolo[1,5′-c]pyrimidine-8′-carbonitrile] derivatives 12–19 through the electrocyclic reaction of the initially formed condensation products 26 in moderate to high yields. The spiro[cyclopentanetriazolopyrimidine] derivatives underwent ring-opening at the cycloalkane moiety upon heating in solution to give 2-alkyl-5-substituted-[1,2,4]triazolo[1,5-c]pyrimidine-8′-carbonitriles 20–23 . When an alkyl substituent was introduced into the cyclopentane ring, cleavage of the spiro compounds occurred preferentially at the cyclopentane moiety between the spiro carbon and the more branched one. In contrast, the cyclohexane ring, especially of spiro-5-amino-triazolopyrimidines 17 and 18 strongly resisted to ring-opening under similar conditions, but those of 5-methylthiotriazolopyrimidines 14 gave up to 17 percent of cleavage after prolonged heating in hot ethanol. 2-t-Butyl-5-methylthio-2,3-dihydro[1,2,4]triazolo[1,5-c]pyrimidine-8-carbonitrile 25 [R³ = C(CH₃)₃] was highly susceptible to the cleavage even at room temperature and produced the corresponding 2-unsubstituted triazolopyrimidine 24 with loss of the t-butyl group.     

A characteristic CH band in VCD of methyl glycosidic carbohydrates

Novel vibrational circular dichroism (VCD) studies in the CH region of a series of methyl glycosidic carbohydrates were examined. The specific CH stretching VCD band predicts absolute stereochemistries of their anomeric positions. The C-1 chiral information was extracted to the methoxy substituent as a probe. The concept of the vibrational chirality probe from a single chiral center in the presence of numerous such centers might be useful in determining the absolute configuration, when a multiplicity of chiral centers is present in a molecule such as a carbohydrate.     

Separation of thiosulfate and the polythionates in gold thiosulfate leach solutions by capillary electrophoresis

A technique for the separation of thiosulfate (S(2)O(3) (2-)), polythionates (S(x)O(6) (2-), x = 3 to 5) and the gold(I) thiosulfate complex (Au(S(2)O(3))(2) (3-)) using capillary electrophoresis with simultaneous UV detection at 195 and 214 nm is presented. The five species were separated in under 3 min with a total analysis time of 8 min, using an electrolyte containing 25 mM 2,2-bis(hydroxymethyl)-2,2',2"-nitrilotriethanol (bis-tris) adjusted to pH 6.0 with sulfuric acid and an applied voltage of -30 kV. While the gold(I) thiosulfate complex could be separated from the other analytes of interest under these conditions, the quantification of this complex was not possible due to inconsistent peak areas and peak splitting effects induced by the sulfur-oxygen species in the leach matrix. Detection limits calculated for 3s pressure injection at 50 mbar ranged between 0.5-2 microM. The method was linear over the ranges 40-8000, 10-2000, 10-2000, and 5-2000 microM for thiosulfate, trithionate, tetrathionate, and pentathionate, respectively. The technique was applied successfully to leach liquors containing 0.5 M ammonium thiosulfate, 2 M ammonia, 0.05 M copper sulfate and 20% w/v gold ore, diluted 1:100 prior to analysis.