A novel tridentate nitrogen donor as ligand in copper catalyzed ATRP of methyl methacrylate

A tridentate ligand, BPIEP: 2,6‐bis[1‐(2,6‐diisopropyl phenylimino) ethyl] pyridine, having central pyridine unit and two peripheral imine coordination sites was effectively employed in controlled/“living” radical polymerization of MMA at 90°C in toluene as solvent, Cu^IBr as catalyst, and ethyl‐2‐bromoisobutyrate (EBiB) as initiator resulting in well‐defined polymers with polydispersities M_w/M_n ≤ 1.23. The rate of polymerization follows first‐order kinetics, k_app = 3.4 × 10^?5 s^?1, indicating the presence of low radical concentration ([P*] ≤ 10^?8) throughout the reaction. The polymerization rate attains a maximum at a ligand‐to‐metal ratio of 2:1 in toluene at 90°C. The solvent concentration (v/v, with respect to monomer) has a significant effect on the polymerization kinetics. The polymerization is faster in polar solvents like, diphenylether, and anisole, as compared to toluene. Increasing the monomer concentration in toluene resulted in a better control of polymerization. The molecular weights (M_n,SEC) increased linearly with conversion and were found to be higher than predicted molecular (M_n,Cal). However, the polydispersity remained narrow, i.e., ≤1.23. The initiator efficiency at lower monomer concentration approaches a value of 0.7 in 110 min as compared to 0.5 in 330 min at higher monomer concentration. The aging of the copper salt complexed with BPIEP had a beneficial effect and resulted in polymers with narrow polydispersitities and higher conversion. PMMA obtained at room temperature in toluene (33%, v/v) gave PDI of 1.22 (M_n = 8500) in 48 h whereas, at 50°C the PDI is 1.18 (M_n = 10,300), which is achieved in 23 h. The plot of lnk_app versus 1/T gave an apparent activation energy of polymerization as (ΔE^≠_app) 58.29 KJ/mol and enthalpy of equilibrium (ΔH⁰_eq) to 28.8 KJ/mol. Reverse ATRP of MMA was successfully performed using AIBN in bulk as well as solution. The controlled nature of the polymerization reaction was established through kinetic studies and chain extension experiments. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4996–5008, 2005     

Titrations with hypovanadous salts

Summary In the present investigations, the standardization of vanadium(II) solution against ferric and cupric salts has been described and a few visual indicators have been shown to be applicable in the above titrations. When iron(III) solution is added to vanadium(II) solution neutral red marks the end point for V^II to V^III change. This change is also noted when vanadium(II) solution is added to ferric solution in the presence of excess of concentrated hydrochloric acid at an elevated temperature and neutral red and phenosafranine as visual indicators. Under the same conditions, the end point with eupric solution also corresponds to this change.When vanadium(II) solution is added to ferric solution at an elevated temperature in the presence of methylene blue or gallocyanine as visual indicators, the end point marks V^II to V^IV change. A mixture of iron and copper has also been titrated successfully with the help of visual indicators.

---

Zusammenfassung Zur Einstellung von Vanadium(II)-lösungen mit Eisen(III)- oder Kupfer(II)-salzen werden als visuelle Indicatoren Neutralrot, Phenosafranin, Methylenblau oder Gallocyanin benutzt. Bei Zugabe von Eisen(III)-lösung zur Vanadium(II)-lösung zeigt Neutralrot den Übergang V^II V^III an. Dieser Übergang wird ebenfalls von Neutralrot und Phenosafranin angezeigt, wenn Vanadium(II)-lösung in Gegenwart von überschüssiger konz. Salzsäure bei erhöhter Temperatur zu Eisen(III)- oder Kupfer(II)-lösung gegeben wird. Der Übergang V^II V^IV wird von Methylenblau oder Gallocyanin angezeigt, wenn Eisen(III)-lösung bei erhöhter Temperatur mit Vanadium(II)-lösung titriert wird. Die Titration eines Gemisches von Eisen(III) und Kupfer(II) wird ebenfalls ausgeführt.

---

---

Thanks of the authors are due to the C.S.I.R. authorities for providing a Junior Research Fellowship to one of them (R.K.M.).     

Reaction of sulphate radical anion (SO<Superscript>.</Superscript><Subscript>4</Subscript><Superscript>-</Superscript>) with hydroxy-and methyl-substituted pyrimidines: a pulse radiolysis study

Reactions of sulphate radical anion (SO·₄ ^-) with 4,6-dihydroxy-2-methyl pyrimidine (DHMP), 2,4-dimethyl-6-hydroxy pyrimidine (DMHP), 6-methyl uracil (MU) and 5,6-dimethyl uracil (DMU) have been studied by pulse radiolysis at pH 3 and at pH 10. The transient intermediate spectra were compared with those from the reaction of hydroxyl radical (·OH). It is proposed that SO·₄ ^- produces radical cations of these pyrimidines in the initial stage. These radical cations are short-lived except in the case of DMHP where a relatively longer lived radical cation is proposed to be formed. When there is a hydrogen atom attached to the N(1) or N(3) position, a deprotonation from these sites is highly favored. When there is no hydrogen attached to these sites, deprotonation from a substituted methyl group is favored. At acidic pH, deprotonation from nitrogen is observed for DHMP, MU and DMU. At basic pH, the radical cation reacts with OH^- leading to the formation of OH adducts.     

Transition metal chemistry of oxime-containing ligands,VI: magnetic and structural properties of mono (pyridine-2-aldoxime) dithiocyanato iron (II) and mono (6-methylpyridine-2-aldoxime) dithiocyanato iron (II) complexes

The complexes of pyridine-2-aldoxime (HPOX) and 6-methylpyridine-2-aldoxime (HMPX) with iron (II) thiocyanate of the type [Fe(L)(NCS)₂] (L=HPOX and HMPX) have been prepared and characterized. A study of X-ray, magnetic, vibrational spectra (conventional and far-infrared), electronic spectra andMössbauer spectra has indicated that these complexes have polymeric, pseudo octahedral, coordination geometry with linear bridging thiocyanate ligands. The electronic spectra of mono complexes show a larger, low symmetry, ligand field than that present in [Fe(L)₂(NCS)₂] complexes. UnperturbedMössbauer spectra show a large quadrupole splitting, E _Q, and smaller isomer shift values in these iron (II) thiocyanate complexes. The magnetically perturbedMössbauer spectra of these iron(II) thiocyanate complexes at room temperature show that the principal component of the electric field gradient tensor is positive and corresponds to ad _xy (⁵B₂) ground state.With 2 Figures     

One-electron reduction of 9, 10-anthraquinone, 1-amino-9, 10-anthraquinone and 1-hydroxy-9, 10-anthraquinone in aqueous-isopropanol-acetone mixed solvent: A pulse radiolysis study

The semiquinone radicals produced by one-electron reduction of 9, 10-anthraquinone, 1-amino-9, 10-anthraquinone and 1-hydroxy-9, 10-anthraquinone have been characterized in aqueous-organic mixed solvent comprising of 30.2 mol dm⁻³ water, 5 mol dm⁻³ isopropanol and 1 mol dm⁻³ acetone, using the pulse radiolysis technique. Spectroscopic characteristics, the kinetic parameters of formation and decay and one acid dissociation constants of the semiquinones and one-electron reduction potentials of the quinones have been estimated. The characteristics of the present semiquinone systems have been compared with those of other similar systems. The observed differences in characteristics of the semiquinones due to different substitutions have been analysed.     

Cellulose polymorphism study with sum-frequency-generation (SFG) vibration spectroscopy: identification of exocyclic CH2OH conformation and chain orientation

Sum-frequency-generation (SFG) vibration spectroscopy is a technique only sensitive to functional groups arranged without centrosymmetry. For crystalline cellulose, SFG can detect the C6H₂ and intra-chain hydrogen-bonded OH groups in the crystal. The geometries of these groups are sensitive to the hydrogen bonding network that stabilizes each cellulose polymorph. Therefore, SFG can distinguish cellulose polymorphs (I_β, II, III_I and III_II) which have different conformations of the exocyclic hydroxymethylene group or directionalities of glucan chains. The C6H₂ asymmetric stretching peaks at 2,944 cm^?1 for cellulose I_β and 2,960 cm^?1 for cellulose II, III_I and III_II corresponds to the trans-gauche (tg) and gauche-trans (gt) conformation, respectively. The SFG intensity of the stretch peak of intra-chain hydrogen-bonded O–H group implies that the chain arrangement in cellulose crystal is parallel in I_β and III_I, and antiparallel in II and III_II.     

Solid phase extraction studies on cellulose based chelating resin for separation,pre-concentration and estimation of Cu2+and Ni2+

Chelating resins based on biopolymers, specifically cellulose, offers a green analytical method for determination of metal ions at trace levels present in various samples. It offers a fast, accurate and simple method for separation and pre-concentration of metal ions at low concentrations, prior to their determination by instrumental method. Cellulose based chelating resin (CELL-GLY) has been synthesised by immobilising glycine on it. CELL-GLY was used for the determination of trace amounts of Cu²⁺ and Ni²⁺ from aqueous solutions before their determination by FAAS. The preparation of CELL-GLY involves simple steps, based on natural and easily available biopolymer cellulose, which makes its use as chelating resin is a green method. The Cu²⁺ and Ni²⁺ can be quantitatively recovered from the CELL-GLY in the pH range 4.8–6.9 and 6.9-7.8 respectively with a recovery of more than 95% for each of these metal ions. Recovery of these metal ions using CELL-GLY was quantitative up to 35 °C. The detection limits for copper and nickel by FAAS were 1.20 ppb and 1.40 ppb, respectively. The method was successfully employed for the determination of trace amounts of Cu²⁺ and Ni²⁺ in various samples.     

Assessing the feasibility study of highly efficient and selective co-sequestration process for cesium and strontium utilizing calix-crown and crown-ether based combined solvent systems

Journal of Radioanalytical and Nuclear Chemistry - Efficient and selective extraction of 137Cs and 90Sr from high level liquid waste (HLLW) is of utmost importance in the back end nuclear fuel...