Projection of Si 1s photoexcited orbitals into resonant Auger electron spectra in KLL decays of Si(CH3)4 and SiF4

Spectator resonant KL(23)L(23) Auger electron spectra have been measured in the Si 1s photoexcitation region of Si(CH(3))(4) using monochromatized undulator radiation combined with a hemispherical electron spectrometer. The broad peak with high intensity in a total ion yield spectrum, coming mainly from excitation of a 1s electron into the 6t(2) vacant orbital, induces a spectator Auger decay in which the excited electron remains in its excited orbital. The component on the higher energy side of this peak through 1s excitation into a Rydberg orbital produces resonant Auger decays in which the excited Rydberg electron moves into a slightly higher Rydberg orbital, or is partly shaken up to a significantly higher Rydberg orbital. These findings of Si(CH(3))(4) indicate a clear contrast to those for SiF(4), in which the 1s excitation into a Rydberg orbital induces a shake-down phenomenon as well as a shake-up one. The results of these molecules exhibit a clear splitting effect among excited orbitals which are smeared out by overlapping due to lifetime widths and due to densely populated levels in the 1s electron excitation spectrum. This is consistent with the calculation on photoexcitation within the framework of density functional theory.     

Time-resolved fluorescence study on the photomerocyanine form of spiropyran and its derivative with azobenzene

The excited state dynamics of the photomerocyanine (PMC) form originating from spirobenzopyran and the bi-functional photochromic compound spirobenzopyran–azobenzene (SpAz), containing typical photochromic molecules of spirobenzopyran (Sp) and azobenzene (Az), were investigated using picosecond time-resolved fluorescence measurements in solution at 200 and 285 K and in a PMMA polymer film at 298 K. While the fluorescence lifetimes of PMC were about twice as long as those of SpAz under all experimental conditions, both lifetimes showed similar strong dependence on viscosity rather than temperature. These results suggest that non-radiative decay to an intermediate state could be accompanied by a significant conformational change. The effect of the Az moiety in this relaxation process is also discussed. It is unlikely that an energy transfer from the PMC moiety to the Az moiety occurs. It was concluded that the PMC moiety in the bi-functional SpAz is independent from the Az moiety.     

Über die Phosphidierung des Nickels durch Phosphortrichlorid

On the Phosphidation of Nickel by Phosphorus Trichloride The phosphidation of nickel sheets by phosphorus trichloride vapor of 30 and 50 Torr has been studied kinetically by gravimetric means in the temperature range of 400–650°C in hydrogen atmosphere. The phosphidation proceeded generally according to the parabolic rate law. The parabolic rate constant increased with an increase of temperature, and its temperature dependence yielded the activation energies of about 33 and 47 kcal/mole for 400–550 and 550–650°C, respectively. X-ray and electron microprobe analyses showed that surfaces of the specimens phosphidized are made up of mixtures of Ni₂P and Ni₆P₅, and that at the phosphide/metal interface the compound Ni₂P is formed. The experiments using argon as carrier gas resulted in the formation of both the phosphides and the chlorides, and this fact could be explained in terms of thermodynamics.     

Singlet Oxygen–mediated Hydroxyl Radical Production in the Presence of Phenols: Whether DMPO–·OH Formation Really Indicates Production of ·OH?¶

The reaction of singlet oxygen (1O2) generated by ultraviolet-A (UVA)-visible light (lambda > 330 nm) irradiation of air-saturated solutions of hematoporphyrin with phenolic compounds in the presence of a spin trap, 5,5-dimethyl-1-pyrroline-N-oxide (DMPO), gave an electron spin resonance (ESR) spectrum characteristic of the DMPO-hydroxyl radical spin adduct (DMPO-*OH). In contrast, the ESR signal of 5,5-dimethyl-2-pyrrolidone-N-oxyl, an oxidative product of DMPO, was observed in the absence of phenolic compounds. The ESR signal of DMPO-*OH decreased in the presence of either a *OH scavenger or a quencher of *O2 and under anaerobic conditions, whereas it increased depending on the concentration of DMPO. These results indicate both 1O2- and DMPO-mediated formation of free *OH during the reaction. When DMPO was replaced with 5-(diethoxyphosphoryl)-5-methyl-1-pyrroline-N-oxide (DEPMPO), no DEPMPO adduct of oxygen radical species was obtained. This suggests that 1O2, as an oxidizing agent, reacts little with DEPMPO, in which a strong electron-withdrawing phosphoryl group increases the oxidation potential of DEPMPO compared with DMPO. A linear correlation between the amounts of DMPO-*OH generated and the oxidation potentials of phenolic compounds was observed, suggesting that the electron-donating properties of phenolic compounds contribute to the appearance of *OH. These observations indicate that 1O2 reacts first with DMPO, and the resulting DMPO-1O2 intermediate is immediately decomposed/reduced to give *OH. Phenolic compounds would participate in this reaction as electron donors but would not contribute to the direct conversion of 1O2 to *OH. Furthermore, DEPMPO did not cause the spin-trapping agent-mediated generation of *OH like DMPO did.     

Medicinal foodstuffs. XXXI. Structures of new aromatic constituents and inhibitors of degranulation in RBL-2H3 cells from a Japanese folk medicine,the stem bark of Acer nikoense

Four new aromatic constituents, rhododendroketoside, (-)-sakuraresinoside, acernikol, and nikoenoside, were isolated from a Japanese folk medicine, the stem bark of Acer nikoense MAXIM. The structures of the new constituents were determined on the basis of chemical and physicochemical evidence. The principle cyclic diarylheptanoids were found to show inhibitory effects on the release of beta-hexosaminidase in RBL-2H3 cells.     

Facile synthesis of polyamide dendrimers from unprotected AB2 building blocks

[structure: see text]. A fast, inexpensive, and highly efficient synthesis of aromatic polyamide dendrimers without the need for protection and deprotection steps has been developed. Dendrons and third-generation polyamide dendrimers were easily prepared by a convergent approach involving activation of a focal point with thionyl chloride, followed by condensation with unprotected AB2 building blocks.     

Synthesis of novel 1,4-, 3,4-, and 4,5-dihydropyrimidines: First successful POCl3 chlorination and regioselective alkoxycarbonylation

Chlorination of 5,6-dihydropyrimidine-4-(3H)-one derivatives (1) with POCl₃ gave 1,4(3,4)-dihydropyrimidines (3), whose alkoxycarbonylation (ClCOOREt₃N or NaH) afforded regioselectively novel compounds (4). A new Pummerer rearrangement of compound (1, X= ---S(O)CH₃) with ₃, gave compound (5h).     

Fused silica capillary tube isotachophoresis using a multichannel photodiode array detector

Isotachophoresis carried out in a 0.25 mm i.d. fused-silica capillary tube yielded high resolution, compared with that in a fluorinated ethylene-propylene polymer tube. The use of an ultraviolet-visible multichannel spectrophotometer with photodiode array as detector together with a cross flow cell (volume 0.01 μl) was investigated. The system was successfully applied to the analysis of cationic dyes such as neutral red, bismarck brown, and basic fuchsine.     

Synthesis of benzylidene-pendant polyphthalimidines from flexible bisphthalides and various diamines

New polyphthalimidine-forming monomers, 5,5′-(oxydi-p-phenylenedicarbonyl)bis(3-benzylidenephthalide) and the 6,6′-derivative, were synthesized by the Friedel–Crafts reaction of diphenyl ether with 5- and 6-chloroformyl-3-benzylidenephthalide, respectively. The direct polycondensation of these bisphthalides with both aliphatic and aromatic diamines in o-phenylphenol at 200–250°C afforded polyphthalimidines having inherent viscosities of 0.2–1.2 dL/g in almost quantitative yields. Syntheses of aliphatic polyphthalimidines with higher inherent viscosities were also achieved by a two-step procedure involving ring-opening polyaddition and subsequent thermal cyclodehydration. All the polymers were amorphous and readily soluble in N-methyl-2-pyrrolidone (NMP), m-cresol, nitrobenzene, pyridine, and chloroform. Tough and flexible films could be cast from NMP solutions of the polymers. Glass transition temperatures of the polyphthalimidines were in the range of 158–246°C. The thermogravimetry of the aromatic polymers showed 10% weight loss in air and nitrogen at 445–515 and 500–520°C, respectively. The crosslinking reaction of some benzylidenependant polyphthalimidines took place at 300°C through double-bond addition to afford cured polymers with improved thermal stability.     

Synthesis of tert-butyl-substituted poly (ether ketone) by nickel-catalyzed coupling polymerization of aromatic dichloride

tert-Butyl substituted poly (aryl ether ketone)s with relatively high molecular weights were prepared by the Ni-catalyzed polymerization of tert-butyl substituted aromatic dichlorides containing ether ketone unit. These polymers were amorphous and soluble in common organic solvents, such as THF, dichloromethane, and chloroform. De-tert-butylation of the polymer by the treatment of trifluoromethanesulfonic acid in the presence of toluene proceeded smoothly and produced crystalline poly (aryl ether ketone). © 1994 John Wiley & Sons, Inc.