Selective chemical vapor deposition synthesis of double-wall carbon nanotubes on mesoporous silica

Double-wall carbon nanotubes (DWNTs) have been selectively synthesized over Fe/Co loaded mesoporous silica by catalytic chemical vapor deposition of alcohol. Several silica materials with desired pore diameter and morphology have been investigated for the DWNT growth. The diameter distribution and selectivity of the DWNT are found to depend on the reaction temperature, pore size, and thermal stability of the support material. A high-yield synthesis of DWNTs has been achieved at 900 degrees C over high-temperature stable mesoporous silica. The outer diameter of DWNTs is found to be in the range of 1.5-5.4 nm with a "d" spacing of 0.38 +/- 0.02 nm between inner and outer layers, which is much larger than those of multiwall carbon nanotubes.     

Perturbation analysis for the rotational spectrum of the NiBr radical in the X2Pi3/2 and A2Delta5/2 states

The millimeter- and submillimeter-wave spectra of the NiBr radical in the X (2)Pi(3/2) and A (2)Delta(5/2) states were observed by a source-modulated microwave spectrometer. The NiBr radical was generated in a dc glow discharge through the mixture of Br(2) vapor and Ar gas by the sputtering reaction with a Ni cathode. Observed transition frequencies were independently analyzed for both electronic states using a standard polynomial expression of a Hund's case (c) approximation. Anomalous behavior of the effective molecular constants in the X (2)Pi(3/2) state was interpreted as the result of the perturbation between the X (2)Pi(3/2) and A (2)Delta(5/2) states. The deperturbed molecular constants were derived using a simplified supermultiplet Hamiltonian including the interaction terms between the two electronic states.     

The effects of epimerization at the 3(1)-position of bacteriochlorophylls c on their aggregation in chlorosomes of green sulfur bacteria. Control of the ratio of 3(1) epimers by light intensity

R- and S-epimerization at the 3(1) position of bacteriochlorophyll (BChl) c and the formation of rod-like aggregates in chlorosomes of green sulfur bacteria were markedly affected in Chlorobium (Cb.) tepidum and Cb. limicola by cultivation under various light intensities (photon fluence rate). The stronger the light, the higher the ratio of the S-epimer to the R-epimer for each homolog of BChl c in the bacteria. S[P,E] BChl cF and S[I,E] BChl cF were found to be the major S-epimers in Cb. tepidum and Cb. limicola, respectively. R[P,E] BChl cF decreased markedly compared to R[E,E] BChl cF in Cb. tepidum, whereas no observable change in the ratio of R[P,E]/R[E,E] was detected for Cb. limicola. With increase in light intensity the Qy absorption maximum of the bacteria shifted to shorter wavelengths. In vitro spectroscopic studies of the aggregates showed a marked difference in the formation of aggregates from R- and S-epimers of BChl c; the S-epimers formed aggregates much more slowly than did the R-epimers. These results suggest that the ratio of the epimers of BChl c might significantly affect the aggregation of BChl in the chlorosome. We propose different roles for the R- and S-epimers in chlorosomes of Cb. limicola and Cb. tepidum.     

X-ray structural study of a zinc(II) inclusion complex of a phenolate-pendant cyclam

The molecular structure of phenol-pendant cyclam-zinc(II) complex,4a, has been determined by X-ray structure analysis. Crystals of4a · ClO₄ · CH₃OH (C₁₆H₂₇N₄OZn · ClO₄ · CH₃OH) are monoclinic, space groupP2₁/nn, with four molecules in the unit cell of dimensionsa=31.198(2) Å,b=8.426(1) Å,c=8.214(1) Å, and=93.96(1)°. The structure was solved by the heavy atom method and refined anisotropically toR=0.044,R _w=0.062 for 1551 independent reflections. The complex assumes a five-coordinate, square pyramidal geometry, where zinc(II) is surrounded by the cyclam moiety in a planar fashion with the pendant phenolate anion occupying an axial position. An extremely short Zn-O(phenolate) bond distance of 1.983(5) Å, in conjunction with the 0.288 Å displacement of Zn(II) above the cyclam N₄ plane toward the phenolate, accounts for the extremely low pK _a value of 5.8 for the pendant phenol. These facts about4a, in comparison with the previous findings for the Ni(II) (4b) and Cu(II) complexes (4c) with the same ligand, illustrate well the characteristics of zinc(II) ion coordination properties.This paper is dedicated to the memory of the late Dr C. J. Pedersen.     

Ionic conductivity of Li2MgSn3O8 ramsdellite

The ionic conductivity of polycrystalline pellets of Li₂MgSn₃O₈ with ramsdellite-type structure was measured by complex impedance technique. The conductivity is 1.2 × 10^?8 (Ω cm)^?1 at 300°C and 2.3 × 10^?4 (Ω cm)^?1 at 450°C. The results are discussed in relation to structural properties.     

An approach to analysis of pigment release from microcapsules with size distribution

We have studied the release curve for microcapsules with size distribution. On the basis of an analogy to the relaxation phenomena with multiple characteristic times, we propose a stretched exponential release curve for the system with size distribution and relate the release curve to the size distribution function of the microcapsule. This method was successfully applied to the transfer of azo-pigments from inner medium of dioctyl phthalate to dispersing medium of methanol through poly(ureaurethane) microcapsule membrane.     

Investigation into new materials for optical devices: the miscibility and solvent effects of azobenzene derivative blends

With the increasing demand for novel devices with optical applications the search for new materials to data store and process becomes a priority. By introducing blends, tailor made properties and low cost give added advantage. Miscibility is an essential requirement for a new material, this research thus involves miscibility studies of poly(4‐(N‐(2‐methacryloyloxyethyl)‐N‐ethylamino)‐4′‐nitroazobenzene)₉₀‐co‐(methyl methacrylate)₁₀, (azobenzene derivative) with polymethyl‐methacrylate (PMMA), polyvinylacetate (PVAc) and polyvinylchloride (PVC) prepared in tetrahydrofuran (THF), and/or dimethylformamide (DMF) and/or dichloromethane (CH₂Cl₂). The glass transitions, solvent and varying molecular weight effect were investigated, since these all primarily influence the miscibility. THF was found to encourage miscibility at specific compositions of PVAc and PVC blends. However, with CH₂Cl₂ and DMF immiscibility is encouraged. The Fox–Flory equation was applied to the blends analyzing the PVC blends in DMF as deviations from ideality. Different molecular weights of PMMA were identified as immiscible regardless of solvent. PMMA's lower solubility in THF and CH₂Cl₂ compared to the azobenzene derivative, displayed the existence of PMMA islands. In all blends the favorable and unfavorable interactions between polymer–solvent–polymer systems are considered. Furthermore, the miscibility effect on increasing the MMA content of the azobenzene derivative was also investigated. Copyright © 2002 John Wiley & Sons, Ltd.     

Photochemical Ionic-Conductivity Switching Systems of Photochromic Crown Ethers for Information Technology

Design of two types of ion-conducting systems using photochromic crown ethers as the photocontrol agents is described; one type is based on the phase transition of azobenzene derivatives induced by their photoisomerization and the other based on the molecular control of metal ion complexation by crowned spirobenzopyrans. The photoresponsive ion-conducting systems are applicable to electrostatic imaging and photorefractive materials.     

Photoelectron spectra and angular distribution in reson three-photon ionization of atomic iron: J dependence

Kenetic energies and angular distributions of photoelectrons emitted by three-photon ionization fo atomic iron through two-photon resonant state e⁷D_J and e⁵ D_J, were measured, by using visible lasers. J-resolved photoelectron bands attributab to the a⁶D_J and a⁴F_j ionic states are reported.