Superconducting Properties in Metallic Phase of NbS3

Metallic phase of NbS₃ was synthesized by heating the crystal of semiconducting NbS₃. Metallic NbS₃ undergoes superconducting transition around 2 K. The analysis of the angular dependence of the upper critical magnetic field suggests that the effect of filmy or fibrous morphology plays an important role in the superconducting properties.     

Generation of ynolates via reductive lithiation using flow microreactors

A new method has been developed for the generation and subsequent reaction of ynolates in a micro flow reactor system. This new procedure allowed for ynolates to be prepared at 0 °C or ambient temperature within 1 min via a reductive lithiation reaction, whereas the corresponding batch processes generally require low temperature control and extended reaction times of up to 1 h. The resulting ynolates were applied to the olefination of carbonyl compounds, with the reactions reaching completion in a much shorter reaction time in the continuous flow reactor than the batch reactor. These results highlight the practical utility of the ynolate reaction, and represent the first reported example of the use of lithium naphthalenide in a flow microreactor, which would contribute to progress of the flash chemistry.     

Control of thermoresponsivity of biocompatible poly(trimethylene carbonate) with direct introduction of oligo(ethylene glycol) under various circumstances

Poly(trimethylene carbonate) (PTMC) is a well‐known biodegradable polymer with good biocompatible properties which make it suitable for biomedical applications. Poly(5‐[2‐{2‐(2‐methoxyethoxy)ethyoxy}‐ethoxymethyl]‐5‐methyl‐1,3‐dioxa‐2‐one) (PTMC‐MOE3OM) and copolymers, bearing oligo ethylene glycol (OEG) at the side chain of PTMC backbone, were selected to investigate the cloud point behavior by solvents such as PBS, water, 10% ethanol solution and various ionic strengths. A pH‐responsive copolymer, poly(TMCM‐MOE3OM‐co‐(5‐methyl‐5‐carboxylic‐1,3‐dioxane‐2‐one)) as carboxylic acid carbonate showed a decreased critical temperature at pH 2. Photo‐responsive copolymer, poly(TMCM‐MOE3OM‐co‐coumarin derivatives) bearing 1% and 10% of photo‐induced molecules (7‐[(5‐(5‐methyl‐1,3‐dioxa‐2‐one)methoxy)]‐methoxy coumarin (TMCM‐coumarin)) exhibited a low cloud point because of the hydrophobic moieties. Meanwhile, alternative coumarin polymer including 2% of 4‐methyl‐7‐[(5‐(5‐methyl‐1,3‐dioxa‐2‐one)methoxy)butoxy)]‐methoxy coumarin (TMCM‐4‐methyl‐coumarin) has been successfully synthesized and copolymerized as a novel molecule. The various combinations of monomers were studied and the significant properties were determined via external triggers after copolymerization. This study showed basically synthetic progress toward designs and trivial rationalization of thermoresponsive copolymers close to body temperature. At present, various pendant groups as side part affect to the lower critical solution temperature (LCST) and biodegradable polymer in order to utilize the actual external stimuli application. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3466–3474     

Preparation of polymethyl methacrylate with well-controlled stereoregularity by anionic polymerization in an ionic liquid solvent

This study investigates the effect of ionic liquids (ILs) on the anionic polymerization of methyl methacrylate (MMA). Polymethyl methacrylate (PMMA), an isotactic polymer, is prepared by anionic polymerization at a high reaction temperature with an IL that acts as both solvent and additive. The most plausible reaction mechanism is determined using ¹H NMR and Fourier-transform infrared spectroscopy. The electrostatic interaction between MMA and the IL increases the apparent steric hindrance in MMA, resulting in the isotactic PMMA.     

Sum-rules and Goldstone modes from extended random phase approximation theories in Fermi systems with spontaneously broken symmetries

The Self-Consistent RPA (SCRPA) approach is elaborated for cases with a continuouslybroken symmetry, this being the main focus of the present article. Correlations beyondstandard RPA are summed up correcting for the quasi-boson approximation in standard RPA.Desirable properties of standard RPA such as fulfillment of energy weighted sum rule andappearance of Goldstone (zero) modes are kept. We show theoretically and, for a modelcase, numerically that, indeed, SCRPA maintains all properties of standard RPA forpractically all situations of spontaneously broken symmetries. A simpler approximate formof SCRPA, the so-called renormalised RPA, also has these properties. The SCRPA equationsare first outlined as an eigenvalue problem, but it is also shown how an equivalent manybody Green’s function approach can be formulated.     

Charge density dependence of solution and gel behaviors of maleic acid-containing polyelectrolytes

Two kinds of polyelectrolytes containing maleic acid component (MA copolymers), i.e., poly(styrene-alt-maleic acid) (PSMA) and poly(vinyl methyl ether-alt-maleic acid) (PVMEMA), were investigated on their polymer chain dimensional changes in solution, and also in gel phase for the latter, as a function of the polymer charge density or pH of the (immersing) solution. Being different from common poly(carboxylic acid)s such as poly(acrylic acid), both of the MA copolymers showed maximum in the reduced viscosity or the gel size with increasing the charge density or the solution pH. The maximum in the reduced viscosity was much more significant for PSMA than PVMEMA. To see if intramolecular hydrogen bond between a pair of dissociated and undissociated carboxyl groups in an MA residue contributes to the emergence of the peak or not, similar measurements were performed also in the presence of concentrated urea (5 M). Almost the same values were obtained up to the peak position for the reduced viscosity and the gel swelling degree with increasing pH of the (immersing) solutions, which strongly suggested that the supposed effect is negligible, if any. All the results including those for PVMEMA system were interpreted in terms of the ionomer-like conformational change (ion cluster formation) of polyelectrolytes that has been often observed when the polymer charges are in rather less polar circumstances.     

Effects of silica nanoparticle addition on polymer semiconductor wettability and carrier mobility in solution‐processable organic transistors on hydrophobic substrates

The effects of the addition of silica nanoparticles (SNPs) on wettability of regioregular poly(3‐hexylthiophene) (P3HT) organic semiconductor solutions on hydrophobic substrates and the carrier mobility in organic field‐effect transistors (OFETs) made of these films are investigated. The dewetting of films made from P3HT solutions on hydrophobic substrates modified with octadecyltrichlorosilane (ODTS) is markedly suppressed after the addition of SNPs with phenyl surfactants. This enables us to fabricate continuous P3HT/SNPs films with high crystallinity by the conventional spin‐coating technique, leading to higher mobility compared with P3HT FETs fabricated on non‐modified substrates. Moreover, the addition of SNPs with larger diameters compensates for the degradation of mobility associated with the increase in the concentration of SNPs. Solution‐processed P3HT/SNPs FETs on ODTS‐modified substrates exhibit a field‐effect mobility of 1.3 × 10^?2 cm² V^?1 s^?1, which is almost comparable to that of P3HT FETs without SNPs (2.1 × 10^?2 cm² V^?1 s^?1). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 509–516     

Control of the size and characteristic features of fluorine-containing aromatic polyamide particles

Nano-sized aromatic polyamide particles with trifluoromethyl groups were prepared via a precipitation polymerization method from 4,4′-diphenyldicarbonyl chloride and 2,2-bis(4-aminophenyl)hexafluoropropane in a dioxane solution containing pyridine. The average diameter of the particles decreased from ca. 500 to 150 nm as the pyridine content increased. The particles were spherical with narrow size distributions. Also, the inherent viscosity and yield of the particles decreased gradually as the pyridine content increased. For all the particles, the degrees of crystallinity were low, and the thermal decomposition temperatures were above 457 °C. The addition of pyridine significantly influenced not only the polymerization but also the affinity between the product and the reaction solution, resulting in a difference in the diameters and characteristic features of the particles. Furthermore, these characteristic features were found to be determined predominantly during precipitation from the reaction solution. Meanwhile, trifluoromethyl groups in the particles had significant influence on the morphology and characteristic features of the particles.