Investigation of the drying conditions for amidosulfuric acid.

The drying conditions for primary standards of volumetric analysis have a significant effect on the titration results due to changes in the purity, stability and homogeneity. Amidosulfuric acid, a strong acid used as a reference material for volumetric analysis in Japan, was dried in a vacuum desiccator or heated at different temperatures, and then measured by Karl-Fischer titration, thermogravimetry/mass spectroscopy (TG-MS), ion chromatography and coulometric titration. The optimum drying conditions were at 50 degrees C for 24 h with crushing.     

Selective and simultaneous determination of phosphate and silicate ions in leaching process waters for ceramics glaze raw materials of narutal origin by ion-exclusion chromatography coupled with UV-detection after postcolumn derivatization.

The selective and simultaneous ion-exclusion chromatography (IEC) with UV-detection on a weakly acidic cation-exchange resin column in the H+ -form (TSKgel Super IC-A/C) was developed and applied for the simultaneous determination of phosphate and silicate ions as the water quality parameters required for optimizing the water-leaching process for ceramics glaze raw materials of natural origin including feldspar, woods-ash, and straw-ash. Phosphate and silicate ions in these water-leaching process water samples were separated selectively from the coexisting anions such as sulfate, chloride, nitrate and carbonate ions, based on the ion-exclusion separation mechanism. They were detected selectively and simultaneously by a postcolumn derivatization with molybdenum-yellow using the UV-detector. Under the optimized separation and detection conditions (eluent, 0-1 mM sulfuric acid; reactant, 10 mM sodium molybdate-25 mM sulfuric acid; detector, UV at 370 nm; temperature, 45 degrees C), the linearity of calibration was in the range 0.1 - 10 ppm for both phosphate and silicate ions, and the detection limits at S/N = 3 were 2.58 ppb for silicate ions and 4.75 ppb for phosphate ions. The effectiveness of this method was demonstrated in practical applications to the water-leaching process for some ceramics glaze raw materials.     

Separation of fulvic acid from soil extracts based on ion-pair formation with a cationic surfactant.

A novel method for separating fulvic acid (FA) from soil extracts is proposed. The FA, defined as the acid-soluble fraction of an alkaline extract of soil, was separated based on the precipitation of an ion-pair with a cationic surfactant, such as domiphen bromide. The precipitate was dissolved in aqueous HCl to produce H+ -type FA and a surfactant chloride (SUR-Cl). SUR-Cl, in the aqueous solution, was removed by extraction with CHCl3. After the aqueous phase was passed through a cation-exchanger (H+ -type), H+ -type FA (FA-SUR) was obtained as a powder by lyophylization. The chemical characteristics of FA-SUR were compared with an FA sample separated according to the method of the International Humic Substances Society using a DAX-8 resin (FA-DAX). The oxygen content, O/C atomic ratio and total acidity of the FA-SUR were significantly larger than the corresponding values for FA-DAX. The solid-state CPMS 13C NMR spectra indicated that the higher oxygen content of the FA-SUR could be due to alcoholic hydroxyl groups and polysaccharides as well as carboxylic groups. These results show that FA-SUR is more polar and hydrophilic than FA-DAX.     

(Triisopropylsilyl)acetaldehyde acetal as a novel protective group for 1,2-diols

(Triisopropylsilyl)acetaldehyde dimethyl acetal (TIPS-ADMA) was synthesized from chlorotriisopropylsilane in three steps. Cyclic and acyclic 1,2-diols can be transformed to (triisopropylsilyl)ethylidene acetals (TIPS-AA). Removal of the acetal by LiBF₄ regenerates the starting diol in excellent yield even in the presence of an acetonide of 1,2-diol. The TIPS-AA group can survive under the deprotection conditions of the acetonide in acetic acid at 80 °C. Selective protection of 2,3- and 4,6-diols for O-methyl d-mannoside with TIPS-ADMA and selective deprotection of the acetals have been achieved.     

Studies on the syntheses of heterocyclic compounds. CLXXIV. An approach to the synthesis of oxyacanthine and berbamine

Schotten-Baumann reaction of the amine (X) with 4-benzyloxy-3,4′-oxydiphenylacetyl chloride (XI) gave two amides, (XIIa) and (XIIb), which were cyclized to give the corresponding 3,4-dihydroisoquinolines, respectively. Methylation of the above 3,4-dihydro-isoquinolines, followed by hydrolysis, afforded the compounds having the same composition as berbamine (Ia) and oxyacanthine (Ib), whose structures are under examination.     

Inhibitory effects of non-steroidal anti-inflammatory drugs on superoxide generation.

Effects of non-steroidal anti-inflammatory drugs (NSAID: amfenac sodium, diclofenac sodium, indomethacin and ketoprofen) on the generation of superoxide anion (O2-) by isolated rat polymorphonuclear leukocytes (PMN) were studied spectrophotometrically using cytochrome c. The effects of these drugs were also studied on O2- production by the xanthine-xanthine oxidase and reduced nicotinamide adenine dinucleotide phosphate (NADPH)-NADPH oxidase systems. Amfenac sodium, at 0.1 mM, inhibited significantly O2- generation in rat PMN induced by opsonized zymosan. At 0.5 mM, diclofenac sodium and indomethacin inhibited the O2- generation in rat PMN. All of the above drugs slightly inhibited O2- production by the xanthine-xanthine oxidase system. On the other hand, O2- production by the NADPH-NADPH oxidase system was significantly inhibited by the addition of amfenac sodium, ketoprofen or indomethacin. These results suggest that non-steroidal anti-inflammatory drugs do not work as an O2- scavenger and block O2- production by the NADPH-NADPH oxidase system of rat PMN. It is concluded that amfenac sodium and the other drugs are able to inhibit granulocyte O2- production by blocking the activation of NADPH-oxidase.