Studies on the constituents of Lonicera species. XVII. New iridoid glycosides of the stems and leaves of Lonicera japonica THUNB

Four new iridoid glycosides, named L-phenylalaninosecologanin (1), 7-O-(4-beta-D-glucopyranosyloxy-3-methoxybenzoyl)secologanolic acid (2), 6'-O-(7alpha-hydroxyswerosyloxy)loganin (3) and (Z)-aldosecologanin (5), were isolated, together with a known one, newly named (E)-aldosecologanin (4), from the stems and leaves of Lonicera japonica. Their structures were established on the basis of chemical and spectral data.     

Characterization of p-aminobenzamidine-based sorbent and its use for high-performance affinity chromatography of trypsin-like proteases

An affinity sorbent, hydrophilic polymer-based carrier of different pore size (Toyopearl) with immobilized p-aminobenzamidine (ABA), has been prepared. Its basic properties and some applications for protein purification were studied. ABA, which is a synthetic inhibitor for trypsin-like proteases, was covalently immobilized to Toyopearl by reductive amination. The ligand density and binding capacity for porcine trypsin varied depending on the pore size of Toyopearl. The maximum binding capacity of the immobilized p-aminobenzamidine Toyopearl (ABA-Toyopearl) for trypsin was more than 40 mg/ml gel. ABA-Toyopearl thus obtained was very stable below pH 8 and was successfully used for high-performance affinity chromatography of trypsin-like proteases such as trypsin, thrombin, tissue-type plasminogen activator or urokinase in a single step at 25 degrees C.     

A molecular-beam study of the collision dynamics of methane and ethane upon a graphitic monolayer on Pt(111)

Utilizing a supersonic molecular-beam scattering technique, the angular intensity distributions of alkane molecules (CH4 and C2H6) have been measured, which are scattered from a chemically inert and highly oriented monolayer graphite (MG) on Pt(111). A MG which covers the Pt(111) surface with a full monolayer is found to induce a large energy loss of alkanes during collision with the surface by phonon creation due to the large mass ratio of an alkane molecule with respect to MG. Based on the classical cube model, only applicable to the molecules without internal mode excitation, the effective masses of MG of 76 (six atoms of carbon) and Pt(111) of 585 (three atoms of platinum) are determined from rare-gas atom scattering data. Despite the difference in the degree of freedom between CH4 and rare-gas atoms, CH4 scattering is found to be well described by the simple hard-cube model as a result of the high symmetry of the CH4 structure. With the recently developed ellipsoid-washboard model, an extension of the hard-cube model to include some internal mode excitation of impinging molecules in addition to the surface corrugation, it is found that unlike CH4 the cartwheel rotation mode of C2H6 is significantly excited during collision, while the helicopter mode excitation is negligible on a flat MG surface.     

Redoxable nanosheet crystallites of MnO2 derived via delamination of a layered manganese oxide

This paper reports on the swelling and exfoliation behavior of a layered protonic manganese oxide, H(0.13)MnO(2).0.7H(2)O, in a solution of tetrabutylammonium (TBA) hydroxide and the formation and characterizations of unilamellar two-dimensional crystallites of MnO(2). At low doses of TBA ions, layered manganese oxide was observed to undergo normal intercalation, yielding a TBA intercalated phase with a gallery height of 1.25 nm. With a large excess of TBA ions, osmotic swelling occurred, giving rise to a very large intersheet separation of 3.5-7 nm. In an intermediate TBA concentration range, the sample exhibited a broad X-ray diffraction profile with superimposed diffraction features due to intercalation and osmotic swelling. The component responsible for the broad profile was isolated by centrifuging the mixture twice at different speeds, and the recovered colloid was identified as a pile of MnO(2) nanosheets, corresponding to the individual host layer of the precursor layered manganese oxide. Observations by transmission electron microscopy and atomic force microscopy revealed high two-dimensional anisotropy with a lateral dimension of submicrometers and a thickness of approximately 0.8 nm. The nanosheet exhibited broad optical absorption with a peak at 374 nm (epsilon = 1.13 x 10(4) mol(-1) dm(3) cm(-1)). The restacking process of the colloidal MnO(2) nanosheets was followed by aging the colloid at a relative humidity of 95%. The broad diffraction pattern due to the exfoliated sheets weakened with time and eventually resolved into two sharp distinct profiles attributable to a TBA intercalation compound with an intersheet spacing of 1.72 nm and an osmotically swollen hydrate with >10 nm at a very early stage. As drying progressed, the former phase became more abundant without a change in interlayer distance, while the degree of swelling of the latter phase gradually decreased to 2.7 nm that remained unchanged on further aging. Subsequent drying at a lower humidity collapsed the 2.7 nm phase. The resulting single 1.72 nm phase was dehydrated by heating at 150 degrees C to produce a phase with a contracted interlayer spacing of 1.3 nm.     

The reactions of beta- and alpha-pyranose peracetates with PCl5, and utilization of the products to construct sarsasapogenin glycosides.

The reactions of beta- and alpha-pyranose peracetates with PCl5 gave products regioselectively chlorinated. The reactions of 1,2,3,4,6-penta-O-acetyl-beta-D-glucopyranose (5) and -beta-D-galactopyranose (6) with PCl5 in CCl4 and that of methyl 2,3,4-tri-O-acetyl-beta-D-glucuronatopyranose (7) with PCl5 in toluene gave 2-O-trichloroacetyl-beta-D-pyranosyl chlorides 4, 12 and 14, respectively, as major products, and alpha-D-pyranosyl chlorides 11, 13 and 15, respectively, as minor products. On the other hand, the reactions of compounds 8 and 9 which were alpha-anomers of 5 and 6, respectively, with PCl5 gave as major products transformed acetyl groups at C-6 to -C(Cl) = CCl2 or -C(Cl)2-CCl3 group (16 and 17 from 8 and 18 from 9). The same reaction of 10, which was alpha-anomer of 7, gave alpha-chloride 15 as a major product. The glycosidation of sugar derivative 4 with sarsasapogenin 23 gave beta-glycoside 24 (29.1%) and alpha-glycoside 25 (46.9%), and that of 12 with 23 gave beta-glycoside 26 (24.0%) and alpha-glycoside 27 (40.8%). The improvement of the yields of beta-glycosides 24 and 26 (66.9 and 62.1% for 24 and 26, respectively) in the glycosidations were accomplished by the employment of alpha-bromides 28 and 29 obtained from 4 and 6, respectively. The glycosidations of monoglycosides 30 and 31 obtained by the treatment 24 and 26, respectively, with ammonia-saturated ether with sugar acetate bromides 32 and 34 gave diglycoside derivatives 35 and 33, respectively.     

Structures of a CO adlayer on a Pt(100) electrode in HClO4 solution studied by in situ STM

We have obtained the first in situ STM atomic images of a CO adlayer on a Pt(100)-(1 x 1) electrode in 0.1 M HClO(4) solution, exhibiting a phase transition from c(6 x 2)-10CO to c(4 x 2)-6CO at E > 0.3 V vs. RHE.     

Dynamic coordination polymers with 4,4'-oxybis(benzoate): reversible transformations of nano- and nonporous coordination frameworks responding to present solvents

Reversible construction of a nanoporous framework from a nonporous framework has been found in the zinc(II) coordination polymer with 4,4'-oxybis(benzoate) (oba). [Zn(2)(oba)(2)(dmf)(2)].2DMF (1), which has 1 nm scale channels, transforms to the nonporous coordination polymer [Zn(oba)(H(2)O)] (2) with the loss of the open framework. Compound 2 on treatment with DMF reversibly yields nanoporous compound 1.     

Mass spectrometric studies on gibberellins

Based on the element maps of twenty-two gibberellin methyl esters fragmentations are discussed, which are characteristic of the common structural features as well as structural modification in gibberellin homologues.