Dual mineralization of dicalcium phosphate and hydroxyapatite formation on both sides of porous membrane: Alternating current induces pH-modulated crystal deposition

Dual mineralization on a porous membrane was carried out using an electrochemical approach. The porous membrane was interposed between a pair of glass cells, and calcium chloride (CaCl₂) and sodium hydrogenphosphate (Na₂HPO₄) solutions were separately injected into the cells. After inserting platinum electrodes into the cells, an alternating current with a sine waveform was applied for a given period of time. The resulting membrane was removed from the glass cells and rinsed with ultrapure water. The minerals formed on the membrane were analyzed by using spectroscopic methods such as scanning electron microscopy (SEM), infrared (IR) spectroscopy, and X-ray diffraction (XRD) and identified to be dicalcium phosphate and hydroxyapatite. It was noted that dicalcium phosphate formed on one side of the membrane, while hydroxyapatite was formed on the other side. Thus, dual mineralization could be successfully achieved on both sides of the porous membrane under an alternating current. This process of dual mineralization is very useful for the formation of versatile organic–inorganic hybrids and also for the regulation of the polymorphs on either side of a membrane.     

Superconducting Properties in Metallic Phase of NbS3

Metallic phase of NbS₃ was synthesized by heating the crystal of semiconducting NbS₃. Metallic NbS₃ undergoes superconducting transition around 2 K. The analysis of the angular dependence of the upper critical magnetic field suggests that the effect of filmy or fibrous morphology plays an important role in the superconducting properties.     

Study of multiple-stacking growth of 1.55 μm InAs columnar quantum dots with modulated tensile-strained InGaAsP barrier layers

An investigation was performed of columnar InAs quantum dots (CQDs) with modulated tensile-strained InGaAsP barriers in which the amount of tensile strain in the upper parts was higher than in the lower parts, the dots being deposited on an InP substrate grown by metalorganic vapor phase epitaxy. The smaller tensile strain of the barrier layers in the lower parts made the photoluminescence (PL) wavelength longer while the larger tensile strain of the barrier layers in the upper parts increased the strain compensation of the CQDs. Compared to CQDs with uniformly tensile-strained barriers, 1.55 μm emission was obtained at a higher average strain of barrier layers. By utilizing modulated tensile-strained barriers, triple-stacking of 12-fold CQDs with a PL wavelength of 1.55 μm using 30-nm-thick spacer layers was achieved with good crystallinity, indicating suitability for fabrication of high density CQDs.     

Growth characteristics of AlN on sapphire substrates by modified migration-enhanced epitaxy

We investigated the effect of growth parameters for obtaining high-quality AlN grown directly on sapphire substrates by a hybridized method, derived from simultaneous source supply and conventional migration-enhanced epitaxy. At an optimal growth temperature of 1200 °C, AlN was atomically smooth and pit-free, while below and above 1200 °C, AlN was rough and with pits, respectively. Surface morphologies also depended on the V/III ratio. Rough surfaces became atomically smooth but then pits appeared, as the V/III ratio increased. The crystallinity revealed by X-ray diffraction changed accordingly. The 600-nm-thick AlN grown under the optimal conditions showed X-ray line widths of as narrow as ∼43 and ∼250 arcsec for (0 0 0 2) and (1 0 1¯ 2) diffractions, respectively.     

Formation of various polymorphs of calcium carbonate on porous membrane by electrochemical approach

Calcium carbonate (CaCO₃) formation was observed without surface modification of the organic template and in the absence of chemical additives such as macromolecules and divalent cations. Our innovative electrochemical approach that involves the use of an alternating current facilitated the crystallization of CaCO₃ polymorphs on a porous polymer membrane. A solution of calcium chloride (CaCl₂) and sodium carbonate (Na₂CO₃) was filled in a glass cell, and the porous membrane was interposed in the cell. A sine waveform of 10 Hz was applied to the platinum electrodes using a high-speed bipolar power supply. An alternating current was generated for 60 min. The crystal morphology and crystal structure of the resulting hybrid membrane were studied. In this electrochemical approach, versatile polymorphs of vaterite, aragonite, and calcite were formed on the membrane, thereby showing that the alternating current induced the formation of various polymorphs of CaCO₃ on the porous membrane even in the absence of any additives.     

Solvent‐ and counterion‐specific swelling behavior of poly(acrylic acid) gels

The collapse of alkali metal poly(acrylate) (PAAM) gels was investigated for various water/organic solvent mixture systems: methanol (MeOH), ethanol (EtOH), 2‐propanol (2PrOH), t‐butanol (tBuOH), dimethyl sulfoxide (DMSO), acetonitrile (AcN), acetone, tetrahydrofuran (THF), and dioxane. In order to ascertain the counterion specificity in the swelling behavior, four kinds of alkali metal counterions were used: Li⁺, Na⁺, K⁺, and Cs⁺. Remarkable solvent and counterion specificities were observed for every counterion species and every solvent system, respectively. For example, in aqueous EtOH the dielectric constants (D_cr) at which collapse occurred were in the order PAACs < PAALi < PAAK < PAANa. On the other hand, the D_cr at which PAALi gel collapsed increased in the order tBuOH < dioxane < THF < MeOH < 2PrOH < EtOH < acetone < AcN < DMSO, where the D_cr ranged from about 39 to about 67. This was in contrast to our previous observation for a partially quaternized poly(4‐vinyl pyridine) (P4VP) gel, which collapsed in a much narrower D_cr region in similar mixed solvents. The present solvent‐ and counterion‐specific collapses are discussed on the basis of solvent properties such as the dielectric constant and Gutmann's donor number and acceptor number of a pure solvent. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2791–2800, 2000     

Lobohedleolide and (7Z)-lobohedleolide,new cembranolides from the soft coral lobophytum hedleyi whitelegge

The structures of lobohedleolide (1) and (7Z)-lobohedleolide (2), two new cembranolides containing the α,β-unsaturated carboxylic acid system isolated from the Japanese soft coral Lobophytum hedleyi Whitelegge, were elucidated from spectral and chemical evidence, and the absolute configuration of (1) was determined by X-ray analysis of its p-bromophenacyl ester (9). Lobohedleolide (1) showed growth inhibition of the in vitro Hella cells.     

Synthetic study of kosinostatin aglycone: synthesis of BCDE rings using alkoxycarbonylmethylation of diazonaphthoquinone

A synthetic study of kosinostatin aglycone is reported. Synthesis of key intermediate lactone 3, which corresponds to the BCDE ring fragment, was accomplished, and the precursor BCD ring fragment 5 was synthesized via two routes. First, 5 was synthesized from 2,5-dimethoxybenzaldehyde 16 by the combination of typical known transformations including efficient application of non-aqueous OsO₄ oxidation in the presence of PhB(OH)₂. However the synthesis required 15 long steps, and its main difficulty was ortho-alkoxycarbonylmethylation of 1-naphthol. Next we attempted to apply our recently developed alkoxycarbonylmethylation of diazonaphthoquinone for the synthesis of 5, and 5 was successfully synthesized in 9 steps from the same starting compound 16. Finally, 5 was stereoselectively converted to lactone 3 via trifluoroacetic acid-mediated cyclization of the 3,4-epoxycylohexanecarboxylic acid derivative.     

Converging-axicon-based radially polarized ytterbium fiber laser and evidence on the mode profile inside the gain fiber

The radially polarized mode is achieved from an active Yb fiber by utilizing of an intracavity converging axicon, where the axicon acts as a TM(01) mode selector based on not only its Brewster convex surface but also the distance between its vertex and plane output coupler. The polarization state of the annular laser beam is checked by using a home-made eight-hole aperture. Furthermore, an uncoated plane glass plate is inserted into the cavity, and the reflected beam points to the existence of an annular lasing mode inside the gain fiber. The issues for developing high-power radially polarized fiber lasers also are considered.