Manipulating the Through‐Space Spin–Spin Interaction of Organic Radicals in the Confined Cavity of a Self‐Assembled Cage

We show a new approach to manipulating the through‐space spin–spin interaction by utilizing the confined cavity of a self‐assembled M₆L₄ coordination cage. The coordination cage readily encapsulates stable organic radicals in solution, which brings the spin centers of the radicals closer to each other. In sharp contrast to the fact that the radical in solution in the absence of the cage is in a doublet state, in the presence of the cage through‐space spin–spin interaction is induced through cage‐encapsulation effects in solution as well as in the solid state, resulting in the triplet state of the complex. These results were confirmed by ESR spectroscopy and X‐ray crystallography. The quantity of triplet species generated by encapsulation in the cage increases with increasing affinity of the radicals to the cage. We estimated the affinity between several types of guests and the cage in solution by cyclic voltammetry. We also demonstrate that the through‐space interaction of organic radicals within the self‐assembled coordination cage can be controlled by external stimuli such as heat or pH.     

Ga-labeling of immunoglobulin G with high specific radioactivity

To obtain radiogallium labeled immunoglobulin G with a high specific radioactivity for in vitro use, a 67Ga source was purified by extraction from 67Ga-gallium citrate with butyl acetate, and a 67Ga-labeling solution was produced. This solution was then used to label a deferoxamine-immunoglobulin G conjugate. Both a very high specific radioactivity (872 +/- 56 MBq/mg) and a high labeling efficiency (94.0%) were achieved.     

分散共聚法制备特殊形态高分子微球的研究

以聚乙二醇 (PEG)大分子单体为反应性稳定剂 ,在丙烯腈的分散共聚反应中添加少量苯乙烯以形成疏水性核 ,制备得到了亚微米级高分子微球 .透射电子显微镜研究表明 ,该高分子微球具有特异的形态结构 .同时研究了分散共聚体系中各种反应因素对微球形态和直径的影响 ,结果表明 ,苯乙烯单体的添加量、PEG大分子单体的浓度及分子量、混合溶剂的组成对微球直径和形态均有明显的影响 .X 射线光电子能谱 (XPS)研究结果表明 ,微球表面聚集有亲水性PEG链 ,核为疏水的聚 (丙烯腈 苯乙烯 ) ,即形成的特异形态的PEG接枝高分子微球亦为复合型结构     

Facile and chemo-selective synthesis of tertiary alkyl isothiocyanates from alcohols

When tert-alcohols were treated with (COOH)₂ and NaSCN in the presence of iodine, tertiary alkyl isothiocyanates were obtained in good yield, whereas the corresponding thiocyanates were obtained in low yield in the absence of iodine.     

Rapid colorimetric determination of manganese in waters containing iron : A modification of the formaldoxime method

A rapid photometric method with formaldoxime is described for the determination of small amounts of manganese in waters containing iron. The iron formaldoxime formed is decomposed by addition of EDTA and hydroxylamine after development of the manganese-formaldoxime color. Beer's law holds up to 3 mg Mn/1. Up to 25 mg iron(II) or (III) per 1 can be tolerated.     

Structures of a CO adlayer on a Pt(100) electrode in HClO4 solution studied by in situ STM

We have obtained the first in situ STM atomic images of a CO adlayer on a Pt(100)-(1 x 1) electrode in 0.1 M HClO(4) solution, exhibiting a phase transition from c(6 x 2)-10CO to c(4 x 2)-6CO at E > 0.3 V vs. RHE.     

Dynamic coordination polymers with 4,4'-oxybis(benzoate): reversible transformations of nano- and nonporous coordination frameworks responding to present solvents

Reversible construction of a nanoporous framework from a nonporous framework has been found in the zinc(II) coordination polymer with 4,4'-oxybis(benzoate) (oba). [Zn(2)(oba)(2)(dmf)(2)].2DMF (1), which has 1 nm scale channels, transforms to the nonporous coordination polymer [Zn(oba)(H(2)O)] (2) with the loss of the open framework. Compound 2 on treatment with DMF reversibly yields nanoporous compound 1.     

Preparation of novel,high‐modulus,swollen‐ or jungle‐gym‐type polyimide gels end‐crosslinked with 1,3,5‐tris(4‐aminophenyl)benzene

A novel preparation approach for high‐performance polyimide gels that are swollen or have a jungle‐gym‐type structure is proposed. A new rigid and symmetric trifunctional amine, 1,3,5‐tris(4‐aminophenyl)benzene (TAPB), was synthesized as a crosslinker. Three different kinds of amic acid oligomers derived from pyromellitic dianhydride (PMDA), 4,4′‐oxydiphthalic anhydride (ODPA), p‐phenylenediamine (PDA), and 4,4′‐oxydianiline (ODA) were end‐crosslinked with TAPB at a high temperature to make polyimide networks with different structures. Transparent polyimide gels were obtained from the ODPA–ODA/TAPB series with high compression moduli of about 1 MPa at their equilibrium swollen states in N‐methylpyrrolidone. Microscopic phase separation occurred during the gelation–imidization process when polyimide networks were generated from PMDA–PDA/TAPB and PMDA–ODA/TAPB. After these opaque polyimide networks were dried, a jungle‐gym‐like structure was obtained for the PMDA–PDA/TAPB and PMDA–ODA/TAPB series; that is, there was a high void content inside the networks (up to 70%) and little volume shrinkage. These polyimide networks did not expand but absorbed the solvent and showed moduli as high as those of solids. Therefore, using the highly rigid crosslinker TAPB combined with the flexible monomers ODPA and ODA and the rigid monomers PMDA and PDA, we prepared swollen, high‐performance polyimide gels and jungle‐gym‐type polyimide networks, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2501–2512, 2002     

Synthesis of poly (ether-sulfone-amide)s by palladium-catalyzed polycondensation of aromatic dibromides containing ether sulfone structure,aromatic diamines,and carbon monoxide

A general method for the preparation of aromatic poly (ether-sulfone-amide)s has been developed. Polymerization is based on the palladium-catalyzed polycondensation of aromatic dibromides containing ether sulfone structural units, aromatic diamines, and carbon monoxide. Reactions were carried out in N, N-dimethylacetamide (DMAc) in the presence of palladium catalyst, triphenylphosphine, and 1,8-diazabicyclo [5,4,0]–7–undecene (DBU), and gave a series of poly (ether-sulfone-amide)s with inherent viscosities up to 0.86 dL/g under mild conditions. The polymers were quite soluble in strong acids, dipolar aprotic solvents, and pyridine. Thermogravimetry of the polymers showed excellent thermal stability, indicating that 10% weight losses of the polymers were observed in the range above 470°C in air. The glass transition temperatures of the polymers were around 230°C, which are higher than those of poly (ether-sulfone) analogues. These polymers also showed the good tensile strengths and tensile modulus. © 1994 John Wiley & Sons, Inc.     

Synthesis of 3,3′-(1,6-hexanediyl)bis-pyrimidine derivatives and 3,4-dithia[6.6](1.3)pyrimidinophane

Several 3,3′-(1,6-hexanediyl)bis[6-methyl-2,4(1H,3H)-pyrimidinedione] derivatives ( 4a, 4b , and 4c ) were synthesized from 1,6-(hexanediyl)bis[6-methyl-2H-1,3-oxazine-2,4(3H)-dione] (3) . Compound 4c was converted to 6, which reacted with thiourea giving thiuronium salt 7 . 3,3′-(1,6-Hexanediyl)bis [1-(2-mercaptoethyl)-6-methyl-2,4(1H,3H)-pyrimidinedione] (9) was obtained by the hydrolysis of 7 , and then 9 was oxidized to 12,22-dimethyl-3,4-dithia[6.6] (1.3)-1,2,3,4-tetrahydro-2,4-dioxopyrimidinophane (10) .