Formation of bcc-Ni thin film on GaAs(100) substrate and phase transformation from bcc to fcc

Ni thin films are prepared on GaAs(100) single-crystal substrates at room temperature by using an ultra-high vacuum radio-frequency magnetron sputtering system. The growth behavior and the crystallographic properties are studied by in-situ refection highenergy electron diffraction and pole-figure X-ray diffraction. In an early stage of film growth, a metastable bcc Ni(100) single-crystal film is formed on GaAs(100) substrate, where the bcc structure is stabilized through hetero-epitaxial growth. With increasing the film thickness, fcc crystals coexist with the bcc(100) crystal. High-resolution cross-sectional transmission electron microscopy shows that the film consists of a mixture of bcc and fcc crystals and that a large number of planar faults exist parallel to the fcc(111) close-packed plane. The results indicate that the bcc structure starts to transform into fcc structure through atomic displacement parallel to the bcc{110} close-packed planes.     

High-Speed Optical Local Access Network System Using Bi-Directional Polarization Multiplexing

A high-speed and economical optical local access network system is proposed where bi-directional polarization multiplexing is applied to a bi-directional transmission. Experimental results using a prototype system confirmlow optical loss and environmental stabilities.     

Ion–ion interactions of LiPF6 and LiBF4 in propylene carbonate solutions

Self-diffusion coefficients of Li⁺ D_Li⁺, PF₆⁻ D_PF6⁻ and solvent propylene carbonate (PC) D_PC in LiPF₆−PC solutions were determined at 298 K by the pulse gradient spin echo (PGSE) NMR technique over the salt concentration range of 0.1–3.0 M (M = mol dm^– 3). The order of the diffusion coefficients was found to be D_Li⁺ < D_PF6⁻ < D_PC over the concentration range examined, and they were monotonically decreased with increasing the salt concentration. Haven ratio Λ/Λ_NMR, where Λ and Λ_NMR represent the ionic conductivity measured electrochemically and that estimated via the Nernst-Einstein equation using the diffusion coefficient, respectively, was evaluated as the measure of the ion–ion interaction in the LiPF₆–PC solutions. Though Λ/Λ_NMR values for LiPF₆-solutions decrease with increasing the salt concentration, they were greater than those for LiBF₄–PC solutions over the whole concentration range examined, which indicates that the ion pair formation ability of PF₆^– ion is weaker than that of the BF₄^– ion. The smaller value of the ionic conductivity for the highly concentrated LiPF₆–PC solution (above 2.0 M) than that of the LiBF₄-solutions can be attributed to the more rapidly increased viscosity relative to the LiBF₄-solution. Classic molecular dynamics (MD) simulations for the respective LiPF₆ and LiBF₄-solution of 0.5 and 1.0 M were also carried out based on the effective pair potentials. Diffusion coefficients, ionic conductivity and Haven ratio for these solutions were calculated from MD trajectories, and they qualitatively agree with those evaluated by experiments. Pair correlation functions g_LiO(r) (for Li⁺–O (PC) pair) and g_LiPF6(r) (for Li⁺–PF₆^– pair) or g_LiBF4(r) (for Li⁺–BF₄^– pair) revealed that the lithium ion weakly forms the contact ion pairs with PF₆^–, whilst strongly with BF₄^–, which supports the present experimental results. Moreover, the simulation results show that both anions in the contact ion pairs predominantly take the monodentate form, which is in contrast to the multidentate coordination predicted by ab initio calculation in gas phase.     

Control of thermoresponsivity of biocompatible poly(trimethylene carbonate) with direct introduction of oligo(ethylene glycol) under various circumstances

Poly(trimethylene carbonate) (PTMC) is a well‐known biodegradable polymer with good biocompatible properties which make it suitable for biomedical applications. Poly(5‐[2‐{2‐(2‐methoxyethoxy)ethyoxy}‐ethoxymethyl]‐5‐methyl‐1,3‐dioxa‐2‐one) (PTMC‐MOE3OM) and copolymers, bearing oligo ethylene glycol (OEG) at the side chain of PTMC backbone, were selected to investigate the cloud point behavior by solvents such as PBS, water, 10% ethanol solution and various ionic strengths. A pH‐responsive copolymer, poly(TMCM‐MOE3OM‐co‐(5‐methyl‐5‐carboxylic‐1,3‐dioxane‐2‐one)) as carboxylic acid carbonate showed a decreased critical temperature at pH 2. Photo‐responsive copolymer, poly(TMCM‐MOE3OM‐co‐coumarin derivatives) bearing 1% and 10% of photo‐induced molecules (7‐[(5‐(5‐methyl‐1,3‐dioxa‐2‐one)methoxy)]‐methoxy coumarin (TMCM‐coumarin)) exhibited a low cloud point because of the hydrophobic moieties. Meanwhile, alternative coumarin polymer including 2% of 4‐methyl‐7‐[(5‐(5‐methyl‐1,3‐dioxa‐2‐one)methoxy)butoxy)]‐methoxy coumarin (TMCM‐4‐methyl‐coumarin) has been successfully synthesized and copolymerized as a novel molecule. The various combinations of monomers were studied and the significant properties were determined via external triggers after copolymerization. This study showed basically synthetic progress toward designs and trivial rationalization of thermoresponsive copolymers close to body temperature. At present, various pendant groups as side part affect to the lower critical solution temperature (LCST) and biodegradable polymer in order to utilize the actual external stimuli application. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3466–3474     

Epitaxial growth of Co(0 0 0 1)hcp/Fe(1 1 0)bcc magnetic bi-layer films on SrTiO3(1 1 1) substrates

Co(0 0 0 1)_hcp/Fe(1 1 0)_bcc epitaxial magnetic bi-layer films were successfully prepared on SrTiO₃(1 1 1) substrates. The crystallographic properties of Co/Fe epitaxial magnetic bi-layer films were investigated. Fe(1 1 0)_bcc soft magnetic layer grew epitaxially on SrTiO₃(1 1 1) substrate with two type variants, Nishiyama–Wasserman and Kurdjumov–Sachs relationships. An hcp-Co single-crystal layer is obtained on Ru(0 0 0 1)_hcp interlayer, while hcp-Co layer formed on Au(1 1 1)_fcc or Ag(1 1 1)_fcc interlayer is strained and may involve fcc-Co phase. It has been shown possible to prepare Co/Fe epitaxial magnetic bi-layer films which can be usable for patterned media application.     

WIDE RANGE DETECTOR USING PARABOLIC CYLINDRICAL MIRROR FOR THz APPLICATIONS

A new, wide-band, high-speed and high-sensitivity THz detector has been developed. The prototype detector consists of a parabolic cylindrical mirror, a long wire antenna and a Schottky barrier diode. Direct detection measurements have shown a stable sensitivity of 150 ± 50 V/W for 1–2 THz without any adjustments. The long wire antenna was fixed at the focus of parabolic cylindrical mirror then it has been realized less operation steps, easy coupling to the external THz signals and a dramatic enhancement in the practicality of this system. The optically polished mirror and frosted surface one showed comparable sensitivities, thus easy polishing and less cost mirror fabrication can be applied for this system. The radiation pattern showed a maximum radiation angle of approximately 23° with its dominant main lobe, which was attributed to the wire antenna character and confirmed good agreements with classical antenna theory.