Syntheses and Characterization of Polymetallosiloxanes from Silicic Acid and Metal Chlorides

Syntheses and characterization of polymetallosiloxanes by the non-hydrolysis sol-gel process using no metal alkoxides were investigated. The reaction of silicic acid (SA) with MCl₄ (M = Ti, Zr) in the molar ratios SA/MCl₄ = 0.5–3.0 using a tetrahydrofuran-methanol solvent formed polymetallosiloxane (PMS), which was insoluble in organic solvents regardless of the molar ratio. The PMS was isolated as esterified polymetallosiloxane by esterification with isopropyl alcohol for various periods, which were soluble in methanol, acetone, and tetrahydrofuran. The number average molecular weight was 1000–3200 for esterified polytitanosiloxane and 3400–11000 for esterified polyzirconosiloxane. Esterified polymetallosiloxanes had no melting point but decomposition point. The results of analytical data indicated that esterified polymetallosiloxane and/or polymetallosiloxane consisted of the main chain of Si–O–Si and Si–O–M linkage with the pendants of alkoxy, silanol, and chloro group.     

Saccharide Recognition by a Three-Arm-Shaped Host Having Preorganized Three-Dimensional Hydrogen-Bonding Sites

Generally, cage-shaped hosts for saccharides can bind strongly to guest molecules because of the three-dimensional preorganized hydrogen-bonding sites. However, the preparation of cage molecules is often difficult because of the low yield of the macrocyclization step. Here, we report a three-arm-shaped molecule possessing pyridine-acetylene-phenol units as a new kind of host having a preorganized three-dimensional hydrogen-bonding site. This three-arm-shaped host was readily prepared compared to a cage-shaped analogue. This host associated with lipophilic glycosides to form chiral complexes, and the association constants were sufficiently high as to be comparable to those of the cage-shaped analogue. Furthermore, this host extracted native monosaccharides into a lipophilic solvent.     

Molecular interactions between lipid bilayers and a water-soluble polymer

Molecular interactions between lipid bilayers (liposomes) and chondroitin sulfate C (CS), a water soluble polymer, have been investigated in terms of zeta-potential, particle size, microscopic-viscosity, microscopic-polarity of liposomes and permeability of calcein. Microscopic morphology is dramatically changed by the addition of CS to the positively charged liposomes (Pos.L), while it is not changed by the addition to uncharged liposomes (Unc.L) or negatively charged liposomes (Neg.L). The absolute value of the particle size of Pos.L increases with the addition of CS, while the zeta- potential of Pos.L decreases. Permeability of Pos.L decreases with an increase in the concentration of CS. Phase transition temperature of Pos.L is changed after the addition of CS. These values, however, are not changed for the other liposomes by the addition of CS. The results of gel filtration chromatography show that CS is absorbed on the Pos.L surface. Microscopic viscosity is also increased by the addition of CS to Pos.L due to the adsorption of CS.     

Synthesis of novel polyxanthenes from poly(arylene ether)s containing benzoyl groups

Poly(arylene ether)s ( 3 ), ( 4 ) containing pendant benzoyl groups as precursors for novel polyxanthenes ( 7 ), ( 8 ) were prepared by nucleophilic substitution reaction of 2,5-difluoro-4-benzoylbenzophenone ( 1 ) or 2,5-difluoro-4-(4-dodecylbenzoyl)-4′-dodecylbenzophenone ( 2 ) with hydroquinone derivatives in the presence of potassium carbonate in N,N-dimethylacetamide. The polycondensation proceeded smoothly at 165°C and produced poly(arylene ether)s with inherent viscosities up to 0.80 dL/g. The novel polyxanthenes were synthesized via the reduction of poly(arylene ether)s followed by the Friedel-Crafts cyclization of diol polymers. The structure of the polyxanthenes was characterized by ¹H-NMR and IR spectroscopies. Polyxanthene 8 was quite soluble in chloroform and THF. The 10% weight loss temperature of polyxanthene 7 was 510°C in nitrogen and it was 90°C higher than the corresponding poly(arylene ether) 3 . © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2267–2272, 1997     

Synthesis and functionalities of poly(N-vinylalkylamide). V. Control of a lower critical solution temperature of poly(N-vinylalkylamide)

N-vinyl-n-butyramide (NVBA), N-vinylisovaleramide (NVIVA), and N-vinyl-n-valeramide (NVVA), which are N-vinylalkylamides with different alkyl groups were synthesized and their solution behavior in a polymeric form was examined. Copolymers of N-vinylisobutyramide (NVIBA) with N-vinylacetamide (NVA), NVIBA with NVVA, and NVVA with NVA were prepared by the solution polymerization to control the LCSTs. The resultant polyNVBA showed a lower critical solution temperature (LCST) sharply at 32°C, but polyN-vinylisovaleramide (polyNVIVA) and polyN-vinyl-n-valeramide(polyNVVA) that have n-butyl and isobutyl groups, respectively, on their side chains were insoluble even in cold water. The water solubility of the resulting polymers was found to vary, depending on the molecular shapes as well as the side chain length of the alkyl groups in question. The copolymers consisting of NVVA, NVIBA, and NVA in water showed LCSTs sharply between 10 and 90°C, depending on changes in their comonomer content. It was found that the changes in LCST that are caused by the incorporation of comonomers are due to changes in the overall hydrophilicity of the polymer. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3087–3094, 1997     

Solid-State Structures and Photoluminescence of Lamellar Architectures of Cu(I) and Ag(I) Paddlewheel Clusters with Hydrogen-Bonded Polar Guests

Two hexanuclear paddlewheel-like clusters appending six carboxylic-acid pendants have been isolated with the inclusion of polar solvent guests: [Cu₆(Hmna)₆]·7DMF (1·7DMF) and [Ag₆(Hmna)₆]·8DMSO (2·8DMSO), where H₂mna = 2-mercaptonicotininc acid, DMF = N,N’-dimethylformamide, and DMSO = dimethyl sulfoxide. The solvated clusters, together with their fully desolvated forms 1 and 2, have been characterized by FTIR, UV–Vis diffuse reflectance spectroscopy, TG-DTA analysis, and DFT calculations. Crystal structures of two solvated clusters 1·7DMF and 2·8DMSO have been unambiguously determined by single-crystal X-ray diffraction analysis. Six carboxylic groups appended on the clusters trap solvent guests, DMF or DMSO, through H-bonds. As a result, alternately stacked lamellar architectures comprising of a paddlewheel cluster layer and H-bonded solvent layer are formed. Upon UV illumination (λ_ex = 365 nm), the solvated hexasilver(I) cluster 2·8DMSO gives intense greenish-yellow photoluminescence in the solid state (λ_PL = 545 nm, Φ_PL = 0.17 at 298 K), whereas the solvated hexacopper(I) cluster 1·7DMF displays PL in the near-IR region (λ_PL = 765 nm, Φ_PL = 0.38 at 298 K). Upon complete desolvation, a substantial bleach in the PL intensity (Φ_PL < 0.01) is observed. The desorption–sorption response was studied by the solid-state PL spectroscopy. Non-covalent interactions in the crystal including intermolecular H-bonds, CH⋯π interactions, and π⋯π stack were found to play decisive roles in the creation of the lamellar architectures, small-molecule trap-and-release behavior, and guest-induced luminescence enhancement.     

Angioarchitecture of tumors induced by two different cloned cell lines established from a transplantable rat malignant fibrous histiocytoma.

Angiogenesis, a biologic process whereby endothelial cells divide and migrate to form new blood vessels, is a key step in tumor growth, invasion, and metastasis. In the present study, we investigated the differences in angioarchitecture between two different tumors induced by cloned cell lines (MT-8 and MT-9), derived from a transplantable rat malignant fibrous histiocytoma, by scanning electron microscopy of vascular corrosion casts. During a 3-week observation period after implantation, the growth of MT-8 tumors appeared to be faster than that of MT-9 tumors. Histologically, MT-8 tumors were of the uniformly undifferentiated sarcoma type arranged in characteristic organoid structures, and MT-9 tumors showed a storiform growth pattern. In MT-8 tumors, neovascularization occurred by sprouting at postimplantation (PI) week 1, and the newly formed capillaries gradually became more tortuous. In MT-9 tumors, at PI week 1, the corrosion casts of newly formed capillaries mainly showed a wavy course but no finger-like outgrowths of capillaries were seen. At PI weeks 2 and 3, the sprouting was seen specifically in MT-9 tumors, forming basket-like structures and glomeruloid structures of capillaries. These results indicate that angiogenesis or angioarchitecture of MT-8 tumors is different from that of MT-9 tumors, depending on the differences in their tumor histology and by the features like absence or presence of basket-like structures and glomeruloid structures of capillaries.