Clinical evaluation of osteocalcin in sera of the patients with neoplasms of bone

The clinical significance of osteocalcin in sera of bone tumors were measured in sera of various kinds of bone tumors. The levels of osteocalcin were higher in bone tumors than those in normal subjects. Serum osteocalcin levels in hypercalcemic groups of bone metastasis and myeloma showed a remarkable increase in a parallelism with serum ALP and LDH levels. These results suggested to be directly or indirectly activated on osteoblast by bone tumors and to be synthesized osteocalcin in osteoblast.     

Phenomenological analysis of elongational flow birefringence in semidilute solutions of hydroxypropylcellulose

The relaxation time of a polymer chain in an elongational flow field was investigated for hydroxypropylcellulose (HPC) semidilute solution systems by two methods: phenomenological analysis of elongational flow-induced birefringence, and dynamic light scattering (DLS) and rheological measurements. To understand the relaxation time of an entangled semiflexible polymer solution in an elongational flow field, scaling analysis of the elongational flow-induced birefringence curve was performed. The results of both temperature and concentration scaling analyses showed that birefringence curves at different temperatures and at several HPC concentrations were described well by a universal birefringence–strain rate curve. This scaling behavior was compared with the "fuzzy cylinder" model. The critical strain rate corresponded to the correlation time of the slow relaxation mode determined by DLS measurement and the relaxation spectrum obtained by dynamic viscoelasticity measurement. The elongational flow-induced birefringence observed in an HPC semidilute solution was concluded to be attributed to the orientation of the HPC segment in the entangled molecular system, because the dominant relaxation mode is found to be the concentration fluctuation of an entangled molecular cluster in a quiescent state.     

Selective vinyl cationic polymerization of monomers with two cationically polymerizable groups. II. p-vinylphenyl glycidyl ether: An epoxy-functionalized styrene

p-Vinylphenyl glycidyl ether (VPGE), a styrene derivative with an epoxy pendant, was polymerized by various cationic initiators, and its selective vinyl polymerization was investigated at low temperatures below ?15°C. BF₃OEt₂ (a metal halide) and CF₃SO₃H (a strong protonic acid) polymerized both vinyl and epoxy groups of VPGE, and produced cross-linked insoluble polymers. The HI/I₂ initiating system and iodine, in contrast, polymerized its vinyl group in polar solvents (CH₂Cl₂ and nitroethane) highly selectively in the temperature range of ?15 to ?40°C to give soluble polymers with a polystyrene backbone and epoxy pendants; however, under these conditions, 10–15% of the epoxy groups of the polymers were consumed during the polymerization by the reaction with the growing species. The polymerization by HI/I₂ in CH₂CI₂ involved a long-lived propagating species, as indicated by a progressive increase in the molecular weight (M?_n) of the polymers with monomer conversion and their fairly narrow molecular weight distributions (M?_w/M?_n ～ 1.6). The differences between the polymerizations of VPGE and p-isopropenylphenyl glycidyl ether, an α-methylstyrene-type counterpart of VPGE, were also discussed with an emphasis on the effects of the α-methyl group in the latter monomer.     

LIGHT INDUCED FLUORESCENCE SPECTRAL CHANGES IN NATIVE PHYTOCHROME FROM Secale cereale L. AT LIQUID NITROGEN TEMPERATURE

Abstract— Fluorescence spectra of native rye phytochrome were determined under different light conditions at liquid nitrogen temperature. Fluorescence spectrum of the red-light-absorbing form (Pr) had a major peak at about 685 nm (14 600 cm⁻¹) and a broad sub-peak at about 515 nm (19 400 cm⁻¹). The peak height at 685 nm was reduced by irradiation with monochromatic light of 640 nm, and a new peak became obvious at about 702 nm (14250 cm⁻¹). This spectral change was almost completely reversed by subsequent irradiation with 700-nm light. Fluorescence spectrum of the photoequilibrium mixture of Pr and far-red-light absorbing form under continuous red light showed a sharp peak at about 685 nm having a peak height ca. 12% of Pr, and a broad sub-peak at about 508 nm (19 700 cm⁻¹). Light of 730 nm did not reduce the peak height at about 685 nm but induced a new shoulder at about 699 nm (14300 cm⁻¹). Monochromatic light of 640 and 700 nm given following the light of 730 nm could not reverse the spectral change at 699 nm induced by the irradiation with 730-nm light. Fluorescence spectrum of Pr in partially degraded phytochrome was similar to that in native phytochrome but the peak position in the red region was shifted by about 5 nm (100 cm⁻¹) to the blue.     

Single-bubble sonochemiluminescence in aqueous luminol solutions

Sonochemiluminescence (SCL) of luminol due to a single bubble is studied through spectral measurement. No SCL was observed from a stable single bubble that emitted high-intensity sonoluminescence (SL). In contrast, SCL was observed under conditions of an unstable dancing bubble, where a bubble grows and ejects tiny bubbles, making it "dance" by counteraction. Furthermore, SCL was observed from dancing bubbles even when SL was not observed, depending on the dissolved gas content. The instability of bubble collapse is the key parameter governing SCL.     

Photolysis of organopolysilanes. The reaction of photochemically generated methylphenylsilylene with conjugated dienes

Photolysis of 2-phenylheptamethyltrisilane (I) in the presence of acyclic and cyclic conjugated dienes has been investigated using both a high-pressure mercury lamp with a quartz filter and a low-pressure mercury lamp with a Vycor filter. Irradiation of I in the presence of 1,3-butadiene, isoprene or 2,3-dimethylbutadiene with a high-pressure mercury lamp gave a product arising from photochemical isomerization of a silacyclopropane derivative and a compound apparently formed by 1,4-silylene addition, along with a 1/1 “ene” adduct of the diene to a photo-rearranged intermediate containing the silicon—carbon double bond. Irradiation of I in the presence of the conjugated diene with a low-pressure mercury lamp, followed by treatment of the product with methanol, afforded a methoxysilane arising from methanolysis of the corresponding silacyclopropane, together with the isomerization product, silacyclopentene and rearranged addition product. Irradiation of I in the presence of cyclopentadiene with a high-pressure mercury lamp produced methylphenylsilylcyclopentadiene, while irradiation of a similar mixture with a low-pressure mercury lamp followed by treatment with methanol gave 4-(methoxymethylphenylsilyl)-1-cyclopentene. With 1,3-cyclooctadiene, the photochemically generated methylphenylsilylene afforded many types of addition product. Photolysis of I in the presence of 1,3-cyclohexadiene, however, afforded none of the silylene addition products.     

Cationic polymerization of p-methylstyrene initiated by acetyl perchlorate: An approach to living polymerization

The cationic polymerization of p-methylstyrene initiated by acetyl perchlorate at ?78°C led to long-lived (living-like) polymers with a narrow molecular weight distribution (M?_w/M?_n = 1.1–1.4) in methylene chloride containing a common ion salt (n-Bu₄NClO₄) or in a less polar solvent (CH₂Cl₂/toluene, 1/4v/v). Under these conditions, the number-average molecular weight (M?_n) of the polymers increased in proportion to monomer conversion and was regulated by the monomer-to-initiator ratio. When fresh feeds of the monomer were repeatedly added to a completely polymerized solution, the polymerization ensued at the same rate as before and the linear increase in M?_n with monomer conversion continued. The effects of solvent polarity and the common ion salt on the polymerization showed the suppression of the ionic dissociation of the propagating species, resulting in a “nondissociated species,” to be the key factor for the formation of the long-lived polymers.     

Separation and simultaneous determination of cobalt, nickel and copper with 2-(4-methyl-2-quinolylazo)-5-diethylaminophenol by reversed-phase high-performance liquid chromatography

Performance of six quinolylazo compounds was studied as a pre-column derivatizing reagent for the separation of metal ions in the reversed-phase high-performance liquid chromatography. 2-(4-Methyl-2-quinolylazo)-5-diethylaminophenol (QADP) was suited for the determination of Co, Ni and Cu in the presence of a large amount of Fe. The detection limits under the optimized conditions [stationary phase: L-column ODS; mobile phase: acetone-water (62:38, v/v) containing 0.01 M NH(4)SCN and 0.01 M 2-morpholinoethanesulfonic acid-NaOH (pH 6); injection volume: 10 mul] were 0.24 ng for Co, 0.22 for Ni and 0.53 for Cu. This method was successfully applied to the determination of these metal ions in a standard steel sample.     

A new type of palladium(0) complex having both electron-withdrawing and -donating sites in a ligand: 5,8-dihydro- and 5,8,9,10-tetrahydro-1,4-naphthoquinone complexes

A new type of palladium(0) complex, (5,8-dihydro-1,4-naphthoquinone)Pd(PPh₃)₂ and (5,8,9,10-tetrahydro-1,4-naphthoquinone)Pd(PPh₃)₂, having both olefin and quinone or dihydro-quinone sites in a ligand molecule was prepared. IR and ¹H NMR spectroscopic studies of these complexes suggested that it is the quinone or dihydro-quinone CC bond which is complexed to Pd. Ligand exchange reactions showed that the stability order of the olefinic quinone complexes was as follows: (1,4-naphthoquinone)Pd(PPh₃)₂ > (5,8-dihydro-1,4-naphthoquinone) Pd(PPh₃)₂>(5,8,9,10-tetrahydro-1,4-naphthoquinone)Pd(PPh₃)₂.