Synthesis of N-labeled 4-oxo-2,2,6,6-tetraethylpiperidine nitroxide for EPR brain imaging

A scalable synthetic route for ¹⁵N-labeled 4-oxo-2,2,6,6-tetraethylpiperidine nitroxide (¹⁵N-TEEPONE) is described. This ¹⁵N-labeled nitroxide is suitable for electron paramagnetic resonance imaging of brain, and its higher sensitivity compared with that of its ¹⁴N-counterpart is an important advantage of the labeled derivative.     

Radical polymerization of trifluoromethyl‐substituted methyl methacrylates and their application for use in pressure‐sensitive paint

Three CF₃‐substituted methyl methacrylates (MMAs), 2,2,2‐trifluoroethyl methacrylate (TFEMA), 1,1,1,3,3,3‐hexafluoroisopropyl methacrylate (HFIPMA) and nonafluoro‐tert‐butyl methacrylate (NFTBMA), were polymerized by conventional radical polymerization to give oxygen‐permeable polymers for application in pressure‐sensitive paint (PSP). The radical copolymerizations of styrene with TFEMA, HFIPMA, or NFTBMA were carried out to examine the effect of CF₃ groups on the polymerizability. The e values increased in the order of MMA (0.40) < TFEMA (0.76) < HFIPMA (1.19) < NFTBMA (1.31). The homopolymers of TFEMA, HFIPMA and NFTBMA (PTFEMA, PHFIPMA, and PNFTBM, respectively) were examined as polymers for use in PSP using 5,10,15,20‐tetrakis(pentafluorophenyl)porphinato platinum(II) (PtTFPP). The PSP consisting of PNFTBMA and PtTFPP exerted very high pressure sensitivity and very low temperature sensitivity. In the absence of oxygen, the temperature sensitivity decreased in the order of PTFEMA > PHFIPMA > PNFTBMA = PMMA, which corresponds to the order of glass transition temperatures (T_g). However, the activation energies of the overall process of the luminescence quenching by oxygen were found to be 16.8 (PMMA), 13.0 (PTFEMA), 6.8 (PHFIPMA), and 4.3 kJ mol^?1 (PNFTBMA). Therefore, the low temperature sensitivity of PNFTBMA was attributed to its high degree of substitution with CF₃ groups and to its relatively high T_g value. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 963–972     

Persistent Dialkylsilanone Generated by Dehydrobromination of Dialkylbromosilanol

A persistent dialkylsilanone was synthesized by the dehydrobromination of a dialkylbromosilanol with tris(trimethylsilyl)silyl potassium in solution at ?80 °C: It was characterized by NMR and IR spectroscopy, and was tested in several reactions. In ²⁹Si NMR spectrum in [D₈]toluene, the signal due to the unsaturated silicon nuclei was observed at 128.7 ppm. Reactions of the dialkylsilanone with water and mesitonitrile oxide gave a silanediol and a [2+3] cycloadduct, respectively. The silanone remains intact in [D₈]toluene below ?80 °C for at least two days, while it undergoes unprecedented isomerization to give a siloxysilene by means of 1,3‐silyl migration at higher temperatures.     

Modeling of the elementary gas-phase reaction during chemical vapor deposition of silicon carbide from CH3SiCl3/H2

We established a gas-phase, elementary reaction model for chemical vapor deposition of silicon carbide from methyltrichlorosilane (MTS) and H₂, based on the model developed at Iowa State University (ISU). The ISU model did not reproduce our experimental results, decomposition behavior of MTS in the gas phase in an environment with H₂. Therefore, we made several modifications to the ISU model. Of the reactions included in existing models, 236 were lacking in the ISU model, and thus were added to the model. In addition, we modified the rate constants of the unimolecular reactions and the recombination reactions, which were treated as a high-pressure limit in the ISU model, into pressure-dependent rate expressions based on the previous reports (to yield the ISU+ model), for example, H₂(+M) → H + H(+M), but decomposition behavior remained poorly reproducible. To incorporate the pressure dependencies of unimolecular decomposition rate constants, and to increase the accuracies of these constants, we recalculated the rate constants of five unimolecular decomposition reactions of MTS using the Rice-Ramsperger-Kassel-Marcus method at the CBS-QB3 level. These chemistries were added to the ISU+ model to yield the UT2014 model. The UT2014 model reproduced overall MTS decomposition. From the results of our model, we confirmed that MTS mainly decomposes into CH₃ and SiCl₃ at the temperature around 1000°C as reported in the several studies.     

Living cationic polymerization of vinyl ethers by electrophile/lewis acid initiating systems. XII. Phosphoric and phosphinic acids/zinc chloride initiating systems for isobutyl vinyl ether

Phosphoric and phosphinic acid derivatives (R¹R²PO₂H; R¹, R² = OPh, OPh; OnBu, OnBu; Ph, Ph; Ph, H) in conjunction with zinc chloride (ZnCl₂) led to living cationic polymerization of isobutyl vinyl ether (IBVE) in toluene below 0°C. The number-average molecular weights (M?_n) of the polymers (M?_n > 2 × 10⁴) were directly proportional to monomer conversion and in excellent agreement with the calculated values assuming that one polymer chain forms per R¹R²PO₂H molecule. Throughout the reaction, the molecular weight distributions (MWDs) stayed narrow (M?_w/M?_n ? 1.1). A dibasic acid, PhOP (O) (OH)₂, coupled with ZnCl₂, also induced living cationic polymerization of IBVE where one molecule of the acid generated two living polymer chains. The polymerization by (PhO)₂PO₂H/ZnCl₂ and its model reactions were directly analyzed by ³¹P and ¹H-NMR spectroscopy. The analysis showed that the acid initially forms the adduct [CH₃CH(OiBu)OP(O)(OPh)₂], the phosphate linkage of which is in turn activated by ZnCl₂ so as to initiate living propagation. The finding thus indicates that (PhO)₂PO₂H indeed acts as an initiator in the living polymerization. The NMR analysis also suggested that an exchange reaction occurs between the phosphate group at the polymer terminal and the chlorine in ZnCl₂. The occurrence of living IBVE polymerization with these various R¹R²PO₂H/ZnCl₂ systems shows that phosphoric and phosphinic acids are another general class of protonic acids which are effective initiators for the living cationic polymerization assisted by Lewis acids. © 1993 John Wiley & Sons, Inc.     

Liquid chromatographic analysis of cinchona alkaloids in beverages

A method for the determination of Cinchona extract (whose main components are the alkaloids cinchonine, cinchonidine, quinidine, and quinine) in beverages by liquid chromatography was developed. A beverage with an alcohol content of more than 10% was loaded onto an OASIS HLB solid-phase extraction cartridge, after it was adjusted to pH 10 with 28% ammonium hydroxide. Other beverages were centrifuged at 4000 rpm for 5 min, and the supernatant was loaded onto the cartridge. The cartridge was washed with water followed by 15% methanol, and the Cinchona alkaloids were eluted with methanol. The Cinchona alkaloids in the eluate were chromatographed on an L-column ODS (4.6 mm id x 150 mm) with methanol and 20 mmol/L potassium dihydrogen phosphate (3 + 7) as the mobile phase. Cinchona alkaloids were monitored with an ultraviolet (UV) detector at 230 nm, and with a fluorescence detector at 405 nm for cinchonine and cinchonidine and 450 nm for quinidine and quinine (excitation at 235 nm). The calibration curves for Cinchona alkaloids with the UV detector showed good linearity in the range of 2-400 microg/mL. The detection limit of each Cinchona alkaloid, taken to be the concentration at which the absorption spectrum could be identified, was 2 microg/mL. The recovery of Cinchona alkaloids added at a level of 100 microg/g to various kinds of beverages was 87.6-96.5%, and the coefficients of variation were less than 3.3%. A number of beverage samples, some labeled to contain bitter substances, were analyzed by the proposed method. Quinine was detected in 2 samples of carbonated beverage.     

Does in-source decay occur independent of the ionization process in matrix-assisted laser desorption?

The influence of the acidic and basic characters of constituent amino acid residues on the peptide fragment ions produced by in-source decay under matrix assisted laser desorption/ionization (MALDI) conditions has been studied using positive- and negative-ion experiments. Whereas the in-source decay spectra of peptides containing basic Arg and/or Lys residues near the N-terminus showed so-called c_n- and a_n-series ions in positive-ion mode, a peptide that has an acidic amino acid cluster near the N-terminus and a basic residue near the C-terminus characteristically formed y_n- and z_n-series ions in the positive-ion in-source decay spectrum. These results indicated that fragment ion series produced by in-source decay depend strongly upon the acidic and basic characters of the constituent amino acid residues and the near N- and C-termini. It was suggested that in-source decay processes occur intrinsically at NH–C^α and CO–NH bonds independent of the formation of molecular-related ions, and that the cleavages at the NH–C^α and CO–NH bonds occurred independently and were dependent on the matrix used.     

Information visualization techniques for sensing and biosensing

The development of new methods and concepts to visualize massive amounts of data holds the promise to revolutionize the way scientific results are analyzed, especially when tasks such as classification and clustering are involved, as in the case of sensing and biosensing. In this paper we employ a suite of software tools, referred to as PEx-Sensors, through which projection techniques are used to analyze electrical impedance spectroscopy data in electronic tongues and related sensors. The possibility of treating high dimension datasets with PEx-Sensors is advantageous because the whole impedance vs. frequency curves obtained with various sensing units and for a variety of samples can be analyzed at once. It will be shown that non-linear projection techniques such as Sammon's Mapping or IDMAP provide higher distinction ability than linear methods for sensor arrays containing units capable of molecular recognition, apparently because these techniques are able to capture the cooperative response owing to specific interactions between the sensing unit material and the analyte. In addition to allowing for a higher sensitivity and selectivity, the use of PEx-Sensors permits the identification of the major contributors for the distinguishing ability of sensing units and of the optimized frequency range. The latter will be illustrated with sensing units made with layer-by-layer (LbL) films to detect phytic acid, whose capacitance data were visualized with Parallel Coordinates. Significantly, the implementation of PEx-Sensors was conceived so as to handle any type of sensor based on any type of principle of detection, representing therefore a generic platform for treating large amounts of data for sensors and biosensors.     

Polymeric organosilicon systems. XVII. Synthesis and photochemical and conducting properties of poly[o-and m-(disilanylene)phenylene]s

Poly[o-(tetramethyldisilanylene)phenylene] ( 2a ), poly[o-(1,2-dimethyldiphenyldisilanylene)-phenylene] ( 2b ), poly[m-(tetramethyldisilanylene)phenylene] ( 2c ), and poly[m-(1,2-dimethyldiphenyldisilanylene)phenylene] ( 2d ) were prepared by the sodium condensation reaction of the corresponding 1,2-and 1,3-bis (chlorosilyl)benzenes in toluene. Irradiation of thin films of 2a-2d in air resulted in a rapid decrease of absorption maxima in the ultraviolet region. The photolysis of 2b and 2d in benzene afforded photodegradation products with low molecular weights. When thin films of 2b and 2d were doped with antimony pentafluoride vapor, films which have conductivities of semi-conductor level were obtained. © 1993 John Wiley & Sons, Inc.     

Oxidation of sec‐alcohols with Ru(II)‐bearing microgel star polymer catalysts via hydrogen transfer reaction: Unique microgel‐core catalysis

Oxidation of sec‐alcohols was investigated with ruthenium‐bearing microgel core star polymer catalysts [Ru(II)‐Star]. The star polymer catalysts were directly prepared via RuCl₂(PPh₃)₃‐catalyzed living radical polymerization of methyl methacrylate (MMA), followed by the arm‐linking reaction with ethylene glycol dimethacrylate ( 1 ) in the presence of diphenylphosphinostyrene ( 2 ). The Ru(II)‐Star efficiently and homogeneously catalyzed the oxidation of 1‐phenylethanol ( S1 ) to give a corresponding ketone (acetophenone) in higher yield (92%) than the analogs of polymer‐supported ruthenium complexes. Importantly, the star catalyst afforded high recycling efficiency in the oxidation. They held catalytic activity against three times catalysis even though they were recovered under air‐exposure, whereas the conventional RuCl₂(PPh₃)₃ lost the activity for same recycling procedure due to the deactivation by oxygen. The stability of the star catalysts during the recycle experiment was confirmed by detailed spectroscopic characterization. The star polymers also catalyzed oxidation for a wide range of sec‐alcohols with aromatic and aliphatic groups. The substrate affinity was different from that with RuCl₂(PPh₃)₃, suggesting the unique selectivity caused by the specific structure. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.