Thiol Modified Chitosan Self-Assembled Monolayer Platform for Nucleic Acid Biosensor

A self-assembled monolayer (SAM) of thiol modified chitosan (SH-CHIT), with thioglycolic acid (TGA) as a modifier to bestow thiol groups, has been prepared onto gold (Au)-coated glass plates for fabrication of the nucleic acid biosensor. The chemical modification of CHIT via TGA has been evidenced by Fourier transform infrared spectroscopy (FT-IR) studies, and the biocompatibility studies reveal that CHIT retains its biocompatible nature after chemical modification. The electrochemical studies conducted onto SH-CHIT/Au electrode reveal that thiol modification in CHIT amino end enhances the electrochemical behavior indicating that it may be attributed to delocalization of electrons in CHIT skeleton that participates in the resonance process. The carboxyl group modified end of DNA probe has been immobilized onto SH-CHIT/Au electrode using N-ethyl-N′-(3-dimethylaminopropyl)carbodimide (EDC) and N-hydroxysuccinimide (NHS) chemistry for detection of complementary, one-base mismatch and non-complementary sequence using electrochemical and optical studies for Mycobacterium tuberculosis detection. It has been found that DNA-SH-CHIT/Au bioelectrode can specifically detect 0.01 μM of target DNA concentration with sensitivity of 1.69?×?10^?6 A μM^?1.     

High-performance liquid chromatographic procedure for the simultaneous determination of norfloxacin, fenbufen and felbinac in rat plasma

A high-performance liquid chromatographic method for the simultaneous determination of norfloxacin, fenbufen and felbinac extracted from 50 microliters of rat plasma is described. Chromatography was performed on a reversed-phase column with ultraviolet detection. By the present method, quantitative and reproducible determinations were possible for norfloxacin, fenbufen and felbinac over the concentration ranges of 0.2-20, 0.2-120 and 0.4-40 micrograms/ml, respectively. The recoveries of norfloxacin, fenbufen and felbinac added to plasma were nearly 100% with a coefficient of variation of less than 8.0%. This method was found to be applicable to pharmacokinetic studies of each drug after the concomitant administration of norfloxacin and fenbufen.     

Vascular dilatory action of the Chinese crude drug. II. Effects of scoparone on calcium mobilization

Further experiments were conducted to examine the effect of scoparone (6,7-dimethoxycoumarin), a coumarin derivative found in the Chinese crude drug "Capillaris Flos," on calcium mobilization. Scoparone does not affect Ca2+ influx through the voltage-dependent channel due to membrane depolarization. Its inhibitory action may be dependent not only on the inhibition of Ca2+ release from sarcoplasmic reticulum but also on the inhibition of extracellular Ca2+ influx through the receptor-operated channel.     

Oriented reconstitution of a membrane protein in a giant unilamellar vesicle: experimental verification with the potassium channel KcsA

We report a method for the successful reconstitution of the KcsA potassium channel with either an outside-out or inside-out orientation in giant unilamellar vesicles, using the droplet-transfer technique. The procedure is rather simple. First, we prepared water-in-oil droplets lined with a lipid monolayer. When solubilized KcsA was encapsulated in the droplet, it accumulated at monolayers of phosphatidylglycerol (PG) and phosphoethanolamine (PE) but not at a monolayer of phosphatidylcholine (PC). The droplet was then transferred through an oil/water interface having a preformed monolayer. The interface monolayer covered the droplet so as to generate a bilayer vesicle. By creating chemically different lipid monolayers at the droplet and oil/water interface, we obtained vesicles with asymmetric lipid compositions in the outer and inner leaflets. KcsA was spontaneously inserted into vesicles from the inside or outside, and this was accelerated in vesicles that contained PE or PG. Integrated insertion into the vesicle membrane and the KcsA orientation were examined by functional assay, exploiting the pH sensitivity of the opening of the KcsA when the pH-sensitive cytoplasmic domain (CPD) faces toward acidic media. KcsA loaded from the inside of the PG-containing vesicles becomes permeable only when the intravesicular pH is acidic, and the KcsA loaded from the outside becomes permeable when the extravesicular pH is acidic. Therefore, the internal or external insertion of KcsA leads to an outside-out or inside-out configuration so as to retain its hydrophilic CPD in the added aqueous side. The CPD-truncated KcsA exhibited a random orientation, supporting the idea that the CPD determines the orientation. Further application of the droplet-transfer method is promising for the reconstitution of other types of membrane proteins with a desired orientation into cell-sized vesicles with a targeted lipid composition of the outer and inner leaflets.     

The structure of the CT complex between 5,7,12,14-tetramethoxydibenzo[b,i]thianthrene with TCNQ

The structure of 1,4-dithiines obtained from orthodihalogeno heterocycles with thiocarbonyl compounds was determined by X-ray structure analysis of the intermolecular charge-transfer complex between 5,7,12,14-tetramethoxydibenzo[b,i]thianthrene and TCNQ. The formation of the thiazole ring has already been reported but the products were confirmed to be 1,4-dithiines by X-ray structure analysis and the previously reported results.     

Evaluation of the disintegration properties of commercial famotidine 20 mg orally disintegrating tablets using a simple new test and human sensory test

The purpose of this study was to demonstrate the usefulness and broad-applicability of a simple disintegration test method for orally disintegrating tablets (ODT). Eight types of commercial famotidine 20 mg orally disintegrating tablets with different physical properties (formulation, manufacturing method, tablet weight, shape, diameter, thickness, etc.), were used. Disintegration times of these tablets were evaluated employing human sensory test, conventional disintegration test, and the new proposed disintegration test. The human sensory test was performed in 5 healthy volunteers. In the conventional disintegration test, the disintegration apparatus described in the Japanese Pharmacopeia (JP 1(st)) was used. Our proposed new test which is characterized by a rotating shaft with a low weight (10, 15 g) and rotation speed (10, 25, 50 rpm) was evaluated using tablets with and without storage under severe conditions (60 degrees C/75%RH for 1 week). The disintegration times of famotidine 20 mg orally disintegrating tablets in human sensory test varied from 9 to 32 s. In contrast, disintegration times in the conventional test were prolonged to over 300 s. Disintegration times in the new proposed test were close to those in human sensory test. Especially, when the new test was conducted with 15 or 10 g weight and 25 rpm, the slope (human sensory test vs. new proposed test) was almost 1. We were able to demonstrate that the new proposed test was useful to estimate the actual human disintegration time.     

Vinyl Polymerization. 418. Polymerization of Vinyl Monomer Initiated by Betaine-Type Polymers in Aqueous Solution

Abstract

Three kinds of betaine-type polymers, which are macromolecular amphoteric electrolytes, were found to be able to polymerize vinyl monomers in aqueous solution through a radical mechanism without any further initiator. Betain-type polymers form hydrophobic areas (HA) in water. Vinyl polymerization commenced in the HA. The effect of the pH of the aqueous solution on polymerization was investigated.     

Vinyl Polymerization. 431. Vinyl Polymerizations Initiated by Block and Random Poly(Styrene-co-Sodium Methacrylate)

Abstract

The polymerization of some kinds of vinyl monomer was found to occur without an ordinary initiator in aqueous solutions of AB-type block or random copolymers of sodium methacrylate with styrene as a so-called “uncatalyzed polymerization.” Although the spin trapping technique showed that the initiation mechanism by the block copolymer was the same as that by the random copolymer, the initiating ability of the block copolymer was lower than that of the random copolymer. Such results are attributable to the difference in the incorporating ability of monomer into the micelles formed by the block copolymer and into the hydrophobic areas formed by the random copolymer.     

Electrical Network of Single‐Crystalline Metal Oxide Nanoclusters Wired by π‐Molecules

In a mixed‐valence polyoxometalate, electrons are usually delocalized within the cluster anion because of low level of inter‐cluster interaction. Herein, we report the structure and electrical properties of a single crystal in which mixed‐valence polyoxometalates were electrically wired by cationic π‐molecules of tetrathiafulvalene substituted with pyridinium. Electron‐transport characteristics are suggested to represent electron hopping through strong interactions between cluster and cationic π‐molecules.