Rotational diffusion of tungstic acid colloids in microgravity as studied by aircraft experiments

 Rotational relaxation times (τ) of anisotropic tungstic acid colloids (3.24 μm in major axis) in aqueous suspension are measured in microgravity (0G), normal gravity (1G) and at 2G. The measurements at 0G and 2G are achieved by parabolic and circular flights, respectively. The limiting slopes of the relaxation curves in the plots of the transmitted light intensity against time are close to zero at 0G irrespective of the flow directions in the flow cell, whereas those at 1G and especially at 2G depend on the flow direction by the convection of the suspension and particle sedimentation. Experimental errors at the τ values at 0G are small compared with those at 1G and 2G, which is ascribed to the lack of movement of impurities in the suspension such as quite small air bubbles, which cannot be recognized with the naked eye, and the convection of the suspension in microgravity. More reliable rotational relaxation times are obtained in microgravity; however, the relaxation times themselves are quite insensitive to gravity. Theτ values observed are larger than those calculated from the particle size, which indicates the important contribution of the electrical double layers formed around the colloidal particles. Received: 22 February 2001 Accepted: 13 June 2001     

Dissipative crystallization of sodium salts of poly (d-glutamic acid), poly (l-glutamic acid), and their low molecular weight analogs

Drying dissipative patterns were observed at room temperature on a cover glass, a watch glass, and a Petri glass dish during the course of dryness of aqueous solution of sodium salts of poly (d-glutamic acid), poly (l-glutamic acid), and their low molecular weight analogs, monosodium d-glutamate, monosodium l-glutamate, and monosodium dl-glutamate. The low molecular weight analogs were hygroscopic and their drying patterns were observed in a dry box coexisted with the bags of desiccant. The broad rings, which are the typical macroscopic drying patterns, were observed for all the samples. Optical isomeric effects on the drying patterns were not recognized. Spherulite (or hedrite) and rod-like crystals from the assemblies of helical main chains of the polymers are formed mainly at the inner area from the broad ring (except central area) and the broad ring area, respectively. Coexistence of sodium chloride enhanced the crystal structures by the cooperative interactions between the polymers and the salts. The typical dissipative crystallization such as accumulation, segregation, and orientation effects of crystals were observed in the drying patterns.     

Colloidal crystallization of thermo-sensitive gel spheres of poly (N-isopropyl acrylamide). Influence of degree of cross-linking of the gels

Morphology, phase diagram, and reflection spectroscopy of the colloidal crystals of thermo-sensitive gel spheres, poly (N-isopropylacrylamide) having degrees of cross-linking 10 and 2?mol.% (pNIPAm(200?C10) and pNIPAm(200?C2)) were studied. Giant colloidal single crystals formed at very low gel concentrations. Critical concentrations of melting increased as the degree of cross-linking decreased in the range from 10 to 0.5?mol.% and/or suspension temperature increased from 20 to 45?°C. The critical concentration decreased sharply as the suspensions were deionized with coexistence of the mixtures of cation- and anion-exchange resins. Density of a gel sphere (gel concentration in weight percent divided by that in volume percent) increased sharply as the degree of cross-linking and/or temperature increased. These results demonstrated that the colloidal crystallization takes place by the extended electrical double layers formed around the gel spheres in addition of the excluded-volume effect of the gels. Most of the researchers including the authors have believed that the crystallization of the gel spheres takes place by the excluded-volume effect. However, the present work clarified that the colloidal interfaces, which are inevitable for the formation of the electrical double layers, are formed firmly between the water phase and gel spheres, though the gel spheres contain a lot of water molecules in the sphere region.     

Oxidation-active flavin models: oxidation of alpha-hydroxy acids by benzo-dipteridine bearing metal-binding site in the presence of divalent metal ion and base in organic solvents.

The oxidizing ability of benzo-dipteridine bearing a bipyridin-6-ylmethyl moiety (4) was found to be increased with Zn(2+) by approximately 10(3)-fold for sulfite addition in MeOH and approximately 10(2)-fold for oxidation of an NADH model in MeCN. It was found for the first time that 4 is able to oxidize alpha-hydroxy acids to alpha-keto acids in the presence of a divalent metal ion such as Zn(2+), Co(2+), and Ni(2+) and an amine base in MeCN or t-BuOH, whereas benzo-dipteridine having a bipyridin-5-ylmethyl moiety (3) is unable to oxidize them under the same conditions. The oxidation reaction was kinetically investigated including the kinetic isotope effect for deuterated mandelic acids (k(H)/k(D) = 2.1-3.7) and the Hammett plots for substituted mandelic acids (V-shaped plots). In the reaction of alpha-substituted alpha-hydroxy acids such as alpha-methyl mandelic and benzylic acids with 4, novel oxidative decarboxylation was found to take place, giving acetophenone and benzophenone, respectively. The oxidation mechanism for mandelic acid was proposed to proceed via a ternary complex of 4.Zn(2+).PhCH(OH)CO(2)(-), in which alpha-oxyanion of mandelate attacks C(4a)-position of 4 to form an adduct followed by 1,2-elimination to afford benzoyl formate and 2e-reduced 4. The roles of the metal ion were proposed as follows; (i) activation of 4, (ii) substrate-binding site, and (iii) activation of the bound alpha-hydroxy acid by lowering pK(a)'s of alpha-OH and alpha-CH. This is a first example that a flavin model oxidizes alpha-hydroxy acids in the presence of a metal ion.     

High pressure effect on the electrical properties of NiS2

A semiconductor-metal transition in the electrical resistance of NiS₂, which has been suggested to be a Mott transition, is observed with decreasing temperature under pressure up to 44 kbar. The transition temperature increases with pressure with a slope of $\text{dT}\text{dP}\text{= 6 ± 1 K/kbar}$. The activation energy in a semiconducting region is found to decrease with increasing pressure and to vanish at about 46 kbar. The critical pressure and temperature are predicted to be 46 ± 2 kbar and 350 ± 20 K.     

Dissociative Excitation of C2H2 in the Electron Cyclotron Resonance Plasma of Ar: Production of CH(A2Δ) Radicals and Formation of Hydrogenated Amorphous Carbon Films

The dissociative excitation reaction of C₂H₂ with the electron-cyclotron resonance plasma of Ar was investigated based on the electrostatic-probe measurements and on the optical emission spectroscopy of the CH(A²Δ–X²Π) transition. The density, n _e, and the temperature, T _e, of free electrons were controlled by adding H₂O molecules externally into the reaction region, and the dependence of the CH(A²Δ–X²Π) emission intensity on the addition of H₂O was observed to compare with the evaluated dependencies based on n _e and T _e. The mechanism of production of CH(A²Δ) was found, predominantly, to be the electron impact with the contribution of 10–20% of the electron-impact dissociation of C₂H radicals; the contribution of the ion–electron recombination was negligible. Hydrogenated amorphous carbon films were fabricated using the same reaction system. The atomic compositions, Raman spectra, and the hardness of films were discussed in terms of the variations of n _e and T _e upon the addition of H₂O molecules.     

Dissipative crystallization of aqueous mixtures of potassium salts of poly(riboadenylic acid) and poly(ribouridylic acid)

Dissipative drying patterns of aqueous mixtures of potassium salts of poly(riboadenylic acid) (KPolyA) and poly(ribouridylic acid) (KPolyU) were studied on a cover glass, a watch glass and a glass dish at room temperature. Accumulation of the polymers forming the broad rings near the outside edge and the inner area of the dried film was observed. The fine multiple ring structures formed when the affinity of the polymer with the substrate is strong. Microscopic drying patterns changed drastically depending on the location in the dried film. Microscopic drying patterns were mainly dendritic long rods and sword (halberd)-like rods. They are assigned to the crystals of double-stranded and triple-stranded helices of the A:U and A:2U complexes, respectively. Cross-like drying patterns are also observed originated from the salt-polymer interaction.     

Drying dissipative structures of the aqueous suspensions of palygorskite and tungstic acid particles

Macroscopic and microscopic dissipative structural patterns during dryness of the aqueous suspensions of palygorskite (PGK, needle-like shaped) and tungstic acid (TA, plate-like) have been studied on a cover glass. The coexistence of the broad ring of the hill accumulated with the particles and the round hills is observed around the outside edges of the dried film and in the center, respectively. These patterns differ from those of the suspensions of spherical particles. Furthermore, the spoke-like patterns, which have been observed for the suspensions of the spherical particles so often, are not observed at all for PGK and TA suspensions. These characteristic macroscopic patterns of PGK and TA are quite similar to those of the fractionated and monodispersed bentonites (plate-like) reported previously Yamaguchi et al. (Colloid Polymer Sci 283:1123, 2005). Wrinkled and/or branch-like fractal patterns are observed in the microscopic scale, which are quite similar to those of bentonites. “Shape information” of the colloidal particles is clarified to be “transferred” to the drying patterns via the convectional and sedimentary patterns during the course of dryness.     

Naphtho[2,1-b:6,5-b']difuran: a versatile motif available for solution-processed single-crystal organic field-effect transistors with high hole mobility

We here report naphtho[2,1-b:6,5-b']difuran derivatives as new p-type semiconductors that achieve hole mobilities of up to 3.6 cm(2) V(-1) s(-1) along with high I(on)/I(off) ratios in solution-processed single-crystal organic field-effect transistors. These features originate from the dense crystal packing and the resulting large intermolecular π-orbital overlap as well as from the small reorganization energy, all of which originate from the small radius of an oxygen atom.