A novel scheme of heterogeneous polymerization of ethylene

The heterogeneous polymerization of ethylene initiated by radiation in tert-butyl alcohol was studied. The polymerization was carried out in a 100-ml reactor at 25–100°C and pressures of 200–300 kg/cm² in the presence of 50 ml of tert-butyl alcohol containing 7 wt-% water. The amounts of polymerized monomer, the average molecular weight of polymer formed, and the molecular weight distribution of polymer were measured at various stages of reaction and at various temperatures. The molecular weight distribution was found to be very much dependent on the reaction time and temperature. For the polymer formed at 50–60°C in the very early stages of reaction, the molecular weight distribution is unimodal, and in the intermediate stage a shoulder appears at a molecular weight higher than the first peak which increases as the polymerization proceeds; eventually a bimodal curve is formed. The bimodal distribution curves were analyzed to determine the fractions and average molecular weights of the each peak. On the basis of these data for the molecular weight distribution and kinetic behavior, a new scheme for the heterogeneous polymerization is proposed which indicates that the polymerization proceeds via propagating radicals in two different physical states, namely, loose and rigid states.     

Influences of fatty acid moiety and esterification of polyglycerol fatty acid esters on the crystallization of palm mid fraction in oil-in-water emulsion

We examined the crystallization of palm mid fraction (PMF) in oil-in-water (O/W) emulsion, after adding polyglycerol fatty acid esters (PGFEs). We employed ultrasonic velocity measurements and DSC techniques, with special emphases on the influences of fatty acid moiety and esterification of PGFE. Twelve types of PGFEs were examined as additives. PGFEs have a large hydrophilic moiety composed of 10 glycerol molecules to which palmitic, stearic and behenic acids were esterified as the fatty acid moiety with different degrees of esterification. Crystallization temperature (T(c)) of PMF remarkably increased with increasing concentrations of the PGFEs as the chain length of the fatty acid moiety increased, and the PGFE became more hydrophobic in accordance with increasing degree of esterification. We observed that the heterogeneous nucleation of PMF in the O/W emulsion was activated at the oil-water interface, where the template effect of very hydrophobic long saturated fatty acid chains of the PGFE might play the main role of heterogeneous nucleation.     

Retention and enantioselective properties of ovomucoid-bonded silica columns Influence of physical properties of base materials and spacer length

The influence of the physical properties of base silica materials and spacer length on chiral separation of enantiomers on ovomucoid (OVM)-bonded materials was investigated. With regard to the pore size of the base silica materials, the 300-Å materials gave higher enantioselectivity, than the 120-Å materials, despite the smaller amounts of bonded OVM proteins. However, higher resolution was obtained with the latter materials. With regard to the spacer length, aminopropyl (AP)-, aminobutyl-, N-(4-aminobutyl)-3-aminopropyl- and N-(6-aminohexyl)-3-aminopropyl-silica gels were activated by N,N′-di-succinimidyl carbonate (DSC) and the proteins were bound. The first two materials showed excellent chiral resolution properties for the solutes tested, and the AP materials gave higher enantioselectivity and resolution. On the other hand, only oxprenolol enantiomers were slightly resolved on the last two materials. Also, AP-silica gels activated by DSC were compared with glycerylpropyl (GP)-silica gels activated by 1,1′-carbonyldiimidazole. The former materials gave higher resolution for acidic and basic solutes despite the lower enantioselectivity, whereas for the unchanged hexobarbital the latter materials gave higher enantioselectivity and almost equal resolution. The above results reveal that the 120-Å base silica gels are more suitable than the 300- Å base silica gels for obtaining larger amounts of bonded OVM proteins and that a less hydrophobic spacer such as an AP group and a hydrophilic spacer such as a GP group are suitable.     

Synthesis of bis(alk-3-en-1-ynyl)benzene with either E- or Z-configuration via a one-pot three-component coupling reaction and its optical properties

A convenient, efficient and stereoselective synthesis of a range of bis(alk-3-en-1-ynyl)benzenes with E- and Z-configuration is described. The protocol involves Cu-mediated cross-coupling reaction of (E)- and (Z)-alk-1-enyldisiamylboranes with (trimethylsilyl)ethynyl bromide and Pd/Cu-catalyzed cross-coupling reaction with diiodobenzene. The sequential cross-coupling reaction proceeds readily under extremely mild conditions in a one-pot manner to afford bis(alk-3-en-1-ynyl)benzenes in good to excellent yields. The optical properties of the products are also described.     

Highly regioselective nucleophilic carbon-carbon bond formation on furans and thiophenes initiated by pummerer-type reaction

[reaction: see text] The reactions of (phenylsulfinyl)furans or -thiophenes with carbon nucleophiles in the presence of trifluoroacetic anhydride allowed the nucleophilic installation of carbon functional groups on the furan and thiophene nuclei with complete regioselectivity.     

Formation of Tc(III)-EDTA complex

Tc(III)-EDTA complex has been synthesized by the ligand substitution reaction of hexakis-(thiourea) technetium(III) ion with EDTA. The complex exhibits absorption maxima at 368 and 470 nm. The formation reaction proceeds predominantly as follows:

Noticeable facilitation of the bismuth-mediated Barbier-type allylation of aromatic carbonyl compounds under solvent-free conditions

When milled together with bismuth shot in the presence of allyl halide, aromatic aldehydes readily underwent a Barbier-type allylation to afford the corresponding homoallyl alcohols in good yield. In contrast to the failure in solution reaction, aromatic ketones also underwent allylic carbonyl addition under solvent-free conditions to give the expected tertiary homoallyl alcohols in moderate to good yield.     

Synthesis of functionalized porphyrins as oxygen ligand receptors

Oxophilic synthetic receptors were designed and synthesized using a porphyrin scaffold, with the aim of constructing a preorganized complementary binding site for phenols and carbohydrates. We pursued three strategies for phenol recognition: (1) Lewis acid/Lewis base combinations serving as a hydrogen bond donor and acceptor for the OH group, (2) Lewis base/pi-pi stacking, targeting both the OH group and the aromatic moiety of phenols, and (3) exchange of the axial hydroxyl ligand on a trivalent and oxophilic metal center of aluminum porphyrin. For the recognition of acidic phenols, the most promising recognition motif was Lewis base/pi-pi stacking, which can bind to phenols with a hydrogen bond and pi-pi stacking interactions. [5-(8-Quinolyl)-10,15,20-triphenylporphyrinato]zinc binds to p-nitrophenol with a binding constant of 540 M(-)(1) in CHCl(3) at 25 degrees C. For carbohydrate recognition, we designed the metalloporphyrin receptor having 8-quinolyl groups and o-carbomethoxymethoxyphenyl groups, where these Lewis basic parts serve as the cooperative hydrogen bonding sites for the hydroxyl groups of glucoside. The receptor binds to beta-octyl glucoside with a binding constant of 7.35 x 10(4) M(-)(1) in CHCl(3) at 15 degrees C, demonstrating importance of formation of a highly ordered hydrogen bonding network between the receptor and the guest. These binding features have significant implications for the rational design of oxophilic artificial receptors.     

Thermally stable rigid π-allylnickel compounds, (π-CHRCR′CR2)Ni(PPhMe2)C6Cl5

The reaction of C₆Cl₅Ni(PPhMe₂)₂Cl with CHRCR′CH₂MgX (X = Br or Cl) yields π-allylnickel compounds, (π-CHRCR′CH₂)Ni(PPhMe₂)C₆Cl₅ (Ia, R = R′ = H; Ib, R = H, R′ = CH₃; Ic, R = CH₃, R′ = H), which are stable in the solid state below ca. 150°C and are fairly stable in solution in the absence of oxygen. The π-allyl group was found by PMR spectroscopy to be rigid even in the presence of an excess of PPhMe₂, P(OEt)₃ or P(OMe)₃.     

Relaxations of selenium in crystalline and amorphous states

Complex shear modulus at 33 kc./sec. is measured at temperatures of ?150–150°C. for amorphous selenium and crystalline selenium with different crystallinities. The dielectric relaxation at 10 kc./sec. to 3 kc./sec. to 3 Mc./sec. is observed at temperatures of ?32–25°C. for iodine-doped crystalline selenium. It is concluded from the results of this study and of others' that selenium exhibits four relaxations, α, β γ, and δ, in order of descending temperature. The β relaxation is observed only in the amorphous sample above the glass temperature and is assigned to the primary relaxation. The α, γ, and δ relaxations are found in the crystalline selenium. The α relaxation, which is prominent in a highly crystalline sample, is assigned to the crystalline relaxation. The γ and δ relaxations increase in peak height with decreasing crystallinity and are attributed to the disordered region in the crystalline selenium. The dispersion map (logarithm of frequency versus reciprocal absolute temperature of loss maximum) of selenium is presented.