Dielectric relaxation in the paracrystalline phase in polyacrylonitrile

Thermal expansion and dielectric relaxation of polyacrylonitrile were measured in the temperature range from ?75 to 152°C. at frequencies from 30 cps to 3 Mc./sec. The thermal expansion curve and the temperature dependence of logarithmic relaxation time both show an inflection at 85°C. An x-ray study by Bohn reveals that this inflection comes from the thermal expansion of the paracrystalline phase of this polymer, and consequently the transition at 85°C. and the associated relaxation are ascribed to molecular motion in the paracrystalline phase. The relaxation strength increases with increasing temperature above this point. The transition is caused by freezing of the bending vibration of chains whereas the relaxation results from rotational vibration. The length of segments in this phase is roughly estimated to be ca. 100 A. by comparing the observed relaxation strength with the theory developed on the basis of the above considerations.     

Synthesis of 2-alkylidenetetrahydrofurans by Ru-catalyzed regio- and stereoselective codimerization of dihydrofurans with alpha,beta-unsaturated esters

2-(1-Alkoxycarbonyl)alkylidenetetrahydrofurans were readily synthesized by the codimerization of 2,3- or 2,5-dihydrofurans with alpha,beta-unsaturated esters using a zerovalent Ru catalyst, Ru(cod)(cot), with high regio- and stereoselectivity.     

Localization of Iα and Iβ phases in algal cellulose revealed by acid treatments

Highly crystalline I-rich type Cladophora cellulose, which had been kept in never-dried condition, was treated in 60wt% sulfuric acid at 100°C, for 1–48h. The cellulose microcrystals thus obtained were analysed by X-ray diffractometry, FT-IR, and transmission electron microscopy. The I component was found to be more degraded than the I component. The cellulose I/I ratios of the samples acid-treated for 0, 24, and 48 h were about 8:2, 6:4, and 4:6, respectively. After the acid treatment, the microcrystals became narrower in width, and very sharp at their ends. These results indicate that the I phase is mostly located at the surface of the microcrystals, which is morphologically more susceptible to the acid treatment.     

Correlation between the structure of water in the vicinity of carboxybetaine polymers and their blood-compatibility

The structure and hydrogen bonding of water in the vicinity of carboxybetaine homopolymer (poly[1-carboxy-N,N-dimethyl-N-(2'-methacryloyloxyethyl)methanaminium inner salt] (PolyCMB), and a random copolymer of CMB and n-butyl methacrylate, Poly(CMB-r-BMA), with various molecular weights were analyzed in their aqueous solutions and thin film with contours of O-H stretching of Raman and attenuated total reflection infrared (ATR-IR) spectra, respectively. The relative intensity of the collective band (C value) corresponding to a long-range coupling of O-H stretchings of the Raman spectra for aqueous solution of Poly(CMB-r-BMA) was very close to that for pure water, which is in contrast with the smaller C value in aqueous solution of ordinary polyelectrolytes. The number of hydrogen bonds collapsed by the presence of one monomer residue (N(corr) value) of PolyCMB and Poly(CMB-r-BMA) (CMB, 45 mol %) (M(w), 1.14 x 10(4) and 1.78 x 10(4), respectively) could be calculated from the C value. The N(corr) values were much smaller than those for ordinary polyelectrolytes and close to those for nonionic water-soluble polymers such as poly(ethylene glycol) and poly(N-vinylpyrrolidone). Furthermore, a water-insoluble Poly(CMB-r-BMA) with a large BMA content (M(w) = 347 kD, CMB 27 mol %) could be cast as a thin film (thickness, ca. 10 microm) on a ZnSe crystal for the ATR-IR analyses. At an early stage of sorption of water into the Poly(CMB-r-BMA) film, the O-H stretching band of IR spectra for the water incorporated in the film was similar to that for free water, which is in contrast with the drastic change in the O-H stretching band of water incorporated in polymer films such as poly(methyl methacrylate) (PMMA) and poly(n-butyl methacrylate) (PBMA). The theoretical vibrational frequency for water molecules hydrating a betaine molecule calculated by using a density functional method supported the experimental results. The adhesion of human platelets to Poly(CMB-r-BMA) films was much less than that to PMMA and PBMA. With an increase in the content of CMB residue, the number of platelets adhered to the Poly(CMB-r-BMA) film drastically decreased and then gradually increased, probably due to the increase in the roughness of the film surface. These results suggest that the carboxybetaine monomer residues with a zwitterionic structure do not significantly disturb the hydrogen bonding between water molecules in both aqueous solution and thin film systems, resulting in the excellent blood-compatibility of the carboxybetaine polymers.     

Radiation-induced heterogeneous polymerization of acrylamide in acetone and acetone–water mixtures

The effects of temperature, dose rate, and monomer concentration on the heterogeneous polymerization of acrylamide in acetone–water mixtures have been studied. Heterogeneous polymerization takes place in mixtures containing less than 60 vol-% water. The polymerization is steady in acetone and nonsteady in acetone an nonsteady in mixtures containing 10–50 vol-% water. The average rate of polymerization is highest in mixtures with about 20 vol-% water. Polymer molecular weight increases with the increasing water content in range 0–10 vol-% and does not change in the range of 30–70 vol-% water. For the polymerization in acetone and an acetone–water 60/40 mixture the activation energies are 2.3 and ?1.8 kcal/mole, the dose rate exponents of rate are 0.78 and 0.52, and the monomer concentration exponents of rate are 0.5 and 1.6, respectively. The polymer molecular weight increases with decreasing dose rate, decreasing temperature, and increasing monomer concentration. These results are discussed in connection with the mechanism of heterogeneous polymerization and the solvent effect.     

Effect of encaged aromatic guests on the shape and connectivity of molecular cavity in crystalline polystyrene evaluated by molecular simulations

The delta form of crystalline syndiotactic polystyrene is a clathrate molecular compound in which various aromatic molecules are encaged. We have investigated the size, shape, and connectivity of the molecular cavity in the crystal using a molecular dynamics simulation. The effects of the guest species on the cavity structure were investigated in detail. In order to systematically vary the guest structure, various aromatic guests, e.g., benzene, toluene, p-xylene, m-xylene, o and mesitylene were examined. The interstitial spaces between the guests and the polymer chains were analyzed by cluster analysis of the free volumes. The individual cavity volumes into which the guests are clathrated were also evaluated. It was found that the guest molecules can greatly affect not only the cavity size and shape but also the connectivity of the cavities. The transport of small molecules in the crystal is discussed in connection with the cavity structure.     

Studies on separation mechanisms of biological molecules on a polyvinyl alcohol column

Summary The chromatographic separation mechanism on a polyvinyl alcohol (PVA) column in aqueous systems was explored utilizing several different types of compound such as polyethylene glycols, carbohydrates, pyrimidine and purine bases, fatty acids, monophosphate nucleotides and glycyl-peptides. Two types of separation mechanisms were found to occur for these substrates. The polyethylene glycols and the carbohydrates were eluted by size-exclusion chromatography. The retention behavior of the other substrates could be explained by the solvophobic theory, suggesting that the predominant separation mode was reversed-phase chromatography. The occurrence of reversed-phase chromatography was also indicated by the remarkable effect of the addition of ion-association reagents to the chromatographic system on the retention of the monophosphate nucleotides.