Efficient Light-Harvesting Antennae Resulting from the Dense Organization of Dyes into DNA Junctions through d-Threoninol

Herein we report the construction of efficient light-harvesting antennae by hybridization of DNA oligonucleotides containing high densities of fluorophores into DNA junctions through d -threoninol. Six pyrene donors could be incorporated into each arm without self-quenching. A perylene acceptor was located at the center of the junction. Antenna effects of a duplex and three- to eight-way junctions were systematically compared. Six- and eight-way junctions had the highest antenna effects, and their effective absorption coefficients were 8.5 times higher than that of perylene. Interestingly, even-numbered junctions had higher efficiencies than odd-numbered junctions. Nondenaturing gel analyses and fluorescence lifetime measurements demonstrated that the strong odd–even effects were derived from differences in the stability of junctions. The results presented will guide the design of efficient artificial photosynthetic systems.     

Spectral analysis of Sr 3d XPS spectrum in Sr-containing hydroxyapatite

The Sr 3d X-ray photoelectron spectroscopy (XPS) spectrum of Sr-containing hydroxyapatite (SHAp) overlaps completely with the P 2p spectrum. Thus, the chemical state identification of Sr in SHAp is a challenging task. In this work, the Sr 3d spectrum was isolated from the overlapping spectra for analyzing the chemical state of Sr using a generic peak-fitting method. The SHAp layers containing various Sr concentrations were produced on a Ti substrate using a chemical treatment process with a calcium phosphate slurry that included Sr (NO₃)₂. The distribution of the constituent elements changed according to the Sr concentration, implying that the chemical state of Sr varied with concentration. The isolation of the Sr 3d XPS spectrum was conducted via spectral deconvolution using the P 2p spectrum corresponding to HAp. The isolated Sr 3d spectrum revealed that the chemical state of Sr was in SrO and Sr-substituted HAp states, and their ratio varied with the Sr concentration in the layer. The SrO to Sr-substituted HAp ratios affected the Sr ion releasing behavior from the SHAp layer, supporting the validity of the obtained analytical results.     

Dehydration‐fragmentation mechanism of cathinones and their metabolites in ESI‐CID

Various cathinone‐derived designer drugs (CATs) have recently appeared on the drug market. This study examined the mechanism for the generation of dehydrated ions for CATs during electrospray ionization collision‐induced dissociation (ESI‐CID). The generation mechanism of dehydrated ions is dependent on the amine classification in the cathinone skeleton, which is used in the identification of CATs. The two hydrogen atoms eliminated during the dehydration of cathinone (primary amine) and methcathinone (secondary amine) were determined, and the reaction mechanism was elucidated through the deuterium labeling experiments. The hydrogen atom bonded to the amine nitrogen was eliminated with the proton added during ESI, in both of the tested compounds. This provided evidence that CATs with tertiary amine structures (such as dimethylcathinone and α‐pyrrolidinophenones [α‐PPs]) do not undergo dehydration. However, it was shown that the two major tertiary amine metabolites (1‐OH and 2″‐oxo) of CATs generate dehydrated ions in ESI‐CID. The dehydration mechanisms of the metabolites of α‐pyrrolidinobutiophenone (α‐PBP) belongs to α‐PPs were also investigated. Stable‐isotope labeling showed the dehydration of the 1‐OH metabolite following a simple mechanism where the hydroxy group was eliminated together with the proton added during ESI. In contrast, the dehydration mechanism of the 2″‐oxo metabolite involved hydrogen atoms in three or more locations along with the carbonyl group oxygen, indicating that dehydration occurred via multiple mechanisms likely including the rearrangement reaction of hydrogen atoms. These findings presented herein indicate that the dehydrated ions in ESI‐CID can be used for the structural identification of CATs.     

Physical properties and application development of recycled products from waste plastics

The degradation of the physical properties of polypropylene (PP) used for automotive outer trims for several years is unexpectedly small. It, therefore, can be fully anticipated that PP so used can be recycled for the same purpose or for other applications.     

Complexation of poly(vinyl alcohol)–congo red aqueous solutions. 3. Dynamic light scattering study

Mesoscopic structures of poly(vinyl alcohol)(SINGLEBOND)Congo red (PVA(SINGLEBOND) CR) complexes in aqueous solutions were investigated in terms of dynamic light scattering (DLS) technique. The intensity-intensity time correlation function, g⁽²⁾(t), was analyzed with an equation including a single and a stretched exponential function. Two diffusion coefficients, D_f (fast) and D_s (slow) were evaluated. D_f was converted to the apparent correlation length, ξ_app, via the mode-mode coupling hypothesis. The estimated ξ_app was insensitive to the sol(SINGLEBOND)to(SINGLEBOND)gel transition but decreased with CR concentration. This change may be related to the electrostatic screening effect. On the other hand, D_s oscillates with increasing CR concentration at a specific PVA concentration range. This explains well the reentrant sol(SINGLEBOND)gel(SINGLEBOND)sol(SINGLEBOND)gel transition behavior observed in the PVA(SINGLEBOND)CR systems. D_s seems to represent the mobility of the PVA(SINGLEBOND)CR complexes, which annihilates at the gel point. © 1996 John Wiley & Sons, Inc.     

Characterization of tension and normally lignified wood cellulose inPopulus maximowiczii

We have investigated unlignified tension wood and normally lignified wood celluloses inPopulus maximowiczii with particular reference to the composition of two crystalline phases I/I (triclinic/ monoclinic). Four independent techniques, which enable us to detect the two phases, CP/MAS¹³C NMR, Fourier transform infrared microscopy, selected-area electron diffraction, and X-ray diffraction were applied. Because of the low crystallinity of wood celluloses, particularly in the case of celluloses in the lignified cell wall, no single method was decisive enough to be able to determine the composition of the two phases as one can with highly crystalline materials. The I dominant structure (monoclinic crystal type) was, however, preferred for both tension and normal wood celluloses.     

Module-based assembly of copper(II) chloranilate compounds: syntheses, crystal structures, and magnetic properties of [[Cu(2)(CA)(terpy)(2)][Cu(CA)(2)]](n)() and [[Cu(2)(CA)(terpy)(2)(dmso)(2)][Cu(CA)(2)(dmso)(2)](EtOH)](n)(H(2)CA = chloranilic acid, terpy = 2,2':6',2' '-terpyridine, dmso = dimethyl sulfoxide)

Two new copper(II) compounds of chloranilate and 2,2':6',2' '-terpyridine have been synthesized, and the structures have been solved by the single-crystal X-ray diffraction method. The crystal structure of [[Cu(2)(CA)(terpy)(2)][Cu(CA)(2)]](n)(1), where H(2)CA = chloranilic acid and terpy = 2,2':6',2' '-terpyridine, consists of two modules, the dimer unit [Cu(2)(CA)(terpy)(2)](2+) and the anionic mononuclear unit [Cu(CA)(2)](2)(-), forming an alternated chain. The chain is stabilized by semicoordinating and additional but efficient secondary bonding interactions. The crystal structure of [[Cu(2)(CA)(terpy)(2)(dmso)(2)][Cu(CA)(2)(dmso)(2)](EtOH)](n)(2), where dmso = dimethyl sulfoxide, consists of solvent molecules and two discrete modules, the dimer unit [Cu(2)(CA)(terpy)(2)(dmso)(2)](2+) and the anionic mononuclear unit [Cu(CA)(2)(dmso)(2)](2)(-). The dimer units form a layer by secondary bonding interactions, and the monomer units and ethanol molecules are introduced between the layers. The magnetic properties of 1 and 2 have been investigated in the temperature range 2.0-300 K. A weak ferromagnetic interaction was observed in 1, J(a) = 2.36 cm(-)(1) and zJ(b) = -0.68 cm(-)(1) while no exchange coupling was observed in 2.     

Ammonium chiral borate salt catalyzed asymmetric Friedel-Crafts alkylation of indoles with α,β-disubstituted enals

In the presence of a catalytic amount of ammonium chiral borate salt, asymmetric Friedel-Crafts alkylation of indoles with α,β-disubstituted enals proceeded to give the corresponding 1,4-addition products with moderate enantioselectivities.     

Morphological studies of a hydrogen-bonded LC polymer obtained by photopolymerization in LC solvents

Anisotropic morphologies and the phase behaviour of a hydrogen-bonded LC polymer obtained by photopolymerization in two kinds of LC solvent are discussed. The hydrogen-bonded LC monomer, 4-(6-acryloyloxyhexyloxy) benzoic acid (A6OBA), was photopolymerized in 4-cyano-4′-hexyloxybiphenyl (6OCB) and in 4-cyano-4′-undecyloxybiphenyl (11OCB), which show a nematic phase and a smectic A phase, respectively. After photo-polymerization, the LC media were removed by extraction and the pure polymer was observed by scanning electron microscopy. SEM images showed that the polymer possessed fibrous morphology with a fibre diameter of a few micrometers, based on polymerization-induced phase separation. The overall geometries reflected typical LC characteristics such as schlieren and focal-conic fan textures. It was found that the hydrogen bond between benzoic acid groups in the monomer was rigid enough to fix the anisotropic phase-separated structure forming during the early stage of phase separation; however, it could not permanently maintain the fibre structure due to dissociation at elevated temperature. X-ray measurements revealed that a well developed layer structure of the hydrogen-bonded mesogen existed in the polymer obtained from the smectic phase of 11OCB, whereas a polymer layer structure could develop only partially from the nematic phase of 6OCB.     

The effect of various calcination treatments on the photocatalytic activity of a rod-type TiO<Subscript>2</Subscript> electrode for oxidation of ethanethiol

It was found that the photoelectrochemical performance and photocatalytic activity of rod-type TiO₂ electrodes were affected by various post-calcination treatments, for example, calcination in NH₃ or under vacuum. Post-calcination treatment in NH₃ at 773 K was particularly effective in increasing the photoelectrochemical performance and photocatalytic activity of rod-type TiO₂ electrodes. A unique photoelectrochemical circuit was constructed by connecting a rod-type TiO₂ electrode to a Pt electrode through a silicon solar cell in which the negative bias was applied on the rod-type TiO₂ electrode. It was found that the photoelectrochemical circuit can effectively oxidize ethanethiol in water into CO₂.