Interactions between clusters of self-interstitial atoms via a conservative climb in BCC–Fe

We conduct kinetic Monte Carlo simulations for the conservative climb motion of a cluster of self-interstitial atoms (SIAs) towards another SIA cluster in BCC–Fe; the conservative climb velocity is inversely proportional to the fourth power of the distance between them, as per the prediction based on Einstein’s equation. The size of the climbing cluster significantly affects its conservative climb velocity, while the size of the cluster that originates the stress field does not. The activation energy for the conservative climb is considerably greater than that derived in previous studies and strongly dependent on the climbing cluster size. The results presented in this study are the atomistic evaluation of the behaviour of SIA clusters through three-dimensional motion, which cannot be achieved using molecular dynamics techniques alone.     

Effect of laser annealing using high repetition rate pulsed laser on optical properties of phosphorus-ion-implanted ZnO nanorods

The effect of high repetition rate pulsed laser annealing with a KrF excimer laser on the optical properties of phosphorus-ion-implanted zinc oxide nanorods has been investigated. The recovery levels of phosphorus-ion-implanted zinc oxide nanorods have been measured by photoluminescence spectra and cathode luminescence images. Cathode luminescence disappeared over 300 nm below the surface due to the damage caused by ion implantation with an acceleration voltage of 25 kV. When the annealing was performed at a low repetition rate of the KrF excimer laser, cathode luminescence was recovered only in a shallow area below the surface. The depth of the annealed area was increased along with the repetition rate of the annealing laser. By optimizing the annealing conditions such as the repetition rate, the irradiation fluence and so on, we have succeeded in annealing the whole damaged area of over 300 nm in depth and in observing cathode luminescence. Thus, the effectiveness of high repetition rate pulsed laser annealing on phosphorus-ion-implanted zinc oxide nanorods was demonstrated.     

Copper-catalyzed complete regio- and stereoselective cyclization of 1-aryl-3-sulfanyl-4-oxahepta-1,6-diynes triggered by alkynylation

Copper(I)-catalyzed alkynylation-cyclization of 4-oxahepta-1,6-diynes 1 with a wide variety of terminal alkynes proceeded to give (3E,4Z)-3-(phenylsulfanylmethylene)-4-(2-propynylidene)tetrahydrofuran-2-yl]benzenes 2aa-he in high yields with complete regio- and stereoselectivity.     

Development and validation of a repharsed phase- HPLC method for simultaneous determination of rosiglitazone and glimepiride in combined dosage forms and human plasma

Background  

Rosiglitazone (ROZ) and glimepiride (GLM) are antidiabetic agents used in the treatment of type 2 diabetes mellitus. A survey of the literature reveals that only one spectrophotometric method has been reported for the simultaneous determination of ROS and GLM in pharmaceutical preparations. However the reported method suffers from the low sensitivity, for this reason, our target was to develop a simple sensitive HPLC method for the simultaneous determination of ROZ and GLM in their combined dosage forms and plasma.     

Star-shaped trimeric quaternary ammonium bromide surfactants: adsorption and aggregation properties

Novel star-shaped trimeric surfactants consisting of three quaternary ammonium surfactants linked to a tris(2-aminoethyl)amine core were synthesized. Each ammonium had two methyls and a straight alkyl chain of 8, 10, 12, or 14 carbons. The adsorption and aggregation properties of these tris(N-alkyl-N,N-dimethyl-2-ammoniumethyl)amine bromides (3C(n)trisQ, in which n represents alkyl chain carbon number) were characterized by equilibrium and dynamic surface tension, rheology, small-angle neutron scattering (SANS), and cryogenic transmission electron microscopy (cryo-TEM) techniques. 3C(n)trisQ showed critical micelle concentrations (CMC) 1 order of magnitude lower than that of the corresponding gemini surfactants with an ethylene spacer and the corresponding monomeric surfactants. The logarithm of the CMC decreased linearly with increasing hydrocarbon chain length for 3C(n)trisQ. The slope of the line, which is well-known as Klevens equation, was larger than those of the monomeric and gemini surfactants; however, considering the total carbon number in the chains, the slope was shallower than the monomeric and was close to the gemini. Through the results such as surface tensions at the CMC (32-34 mN m(-1)) and the parameters of standard free energy, CMC/C(20) and pC(20), it was found that 3C(n)trisQ could adsorb densely at the air/water interface despite the strong electrostatic repulsion between multiple quaternary ammonium headgroups. Moreover, dynamic surface tension measurements showed that the kinetics of adsorption for 3C(n)trisQ to the air/water interface was slow because of their bulky structures. Furthermore, the results of rheology, SANS, and cryo-TEM determined that 3C(n)trisQ with n = 10 and 12 formed ellipsoidal micelles at low concentrations in solution and the structures transformed to threadlike micelles with very few branches for n = 12 as the concentration increased, but for n = 14 threadlike micelles formed at relatively low concentrations.     

Precise measurement of positronium hyperfine splitting using the Zeeman effect

Positronium is an ideal system for the research of the quantum electrodynamics (QED) in bound state. The hyperfine splitting (HFS) of positronium, Δ_HFS, gives a good test of the bound state calculations and probes new physics beyond the Standard Model. A new method of QED calculations has revealed the discrepancy by 15 ppm (3.9σ) of Δ_HFS between the QED prediction and the experimental average. There would be possibility of new physics or common systematic uncertainties in the previous all experiments. We describe a new experiment to reduce possible systematic uncertainties and will provide an independent check of the discrepancy. We are now taking data and the current result of Δ_HFS?=?203.395 1 ±0.002 4 (stat., 12 ppm) ±0.001 9 (sys., 9.5 ppm) GHz has been obtained so far. A measurement with a precision of O(ppm) is expected within a year.     

Optimum Temporal Pulse Shape of Launched Light for Optical Time Domain Reflectometry Type Sensors Using Brillouin Backscattering

We investigated numerically the relationship between the temporal shape of an optical pulse launched into an optical fiber and the power spectrum of the Brillouin backscattered light it produces. We analyzed the measurement error of the peak-power frequency of the Brillouin backscattered light power spectra obtained from the launched light with various pulse shapes. In this investigation and analysis, we characterized the pulse shape by the width, leading-trailing time, and steepness. Regardless of the launched pulse shape, the peak-power frequency-measurement error increases as the pulse width shortens. For identical launched pulse widths, a triangular pulse generates the Brillouin backscattered-light power spectrum with both the narrowest profile and the largest peak power, and consequently provides the minimum error when we measure the peak-power frequency. This shows that a temporally triangular pulse is the best for the launched light.     

Synthesis and in vitro antifungal activities of novel triazole antifungal agent CS-758.

Synthesis and in vitro antifungal activities of a novel triazole antifungal agent CS-758 (former name, R-120758) are described. The minimum inhibitory concentrations (MICs) of a series of dioxane-triazole compounds related to R-102557 were examined. Variation of the length of the chain between the dioxane ring and the phenyl ring revealed that the linkage with two double bonds is the most preferable. When a cyano group was introduced to the C4 position on the benzene ring, MICs improved further. A fluorine atom was introduced to obtain CS-758. The MICs of CS-758 surpassed those of fluconazole and itraconazole against Candida, Aspergillus and Cryptococcus species. The precursor (E,E)-aldehyde was synthesized stereoselectively from 3-fluoro-4-methylbenzonitrile using the Horner-Wadsworth-Emmons reaction.     

Multiple magma reservoirs for the 1707 eruption of Fuji volcano,Japan

In 1707, approximately 0.7 km³ of magma erupted from new vents on the southeastern slope of Fuji volcano. The air-fall clasts of this explosive eruption are composed of vesicular dacite pumice, andesitic dense scoria, basaltic dense scoria, and vesiculated basalt scoria, stratified from bottom to the top of the fallout unit. Some compositional gaps are found in the variation from basalt to dacite indicating that three independent magmas, basalt, andesite and dacite, existed just prior to the eruption. Andesite and dacite magmas are mixed just prior to or during the eruption showing a linear two component mixing in the major and trace element concentration. Basalt in the later stage of the eruption shows no compositional affinity with the above two magmas. Basalt magma might have acted as a heat source to remobilize the andesite and dacite magmas, and the explosive eruption of basalt could have been caused by the abrupt pressure release due to precursory mixing and eruption of dacite and andesite magmas.