NANOMECHANICAL MAPPING OF CARBON BLACK REINFORCED NATURAL RUBBER BY ATOMIC FORCE MICROSCOPY

Atomic force microscopy （AFM） has the advantage of obtaining mechanical properties as well as topographic information at the same time. By analyzing force-distance curves measured over two-dimensional area using Hertzian contact mechanics, Young＇s modulus mapping was obtained with nanometer-scale resolution. Furthermore, the sample deformation by the force exerted was also estimated from the force-distance curve analyses. We could thus reconstruct a real topographic image by incorporating apparent topographic image with deformation image. We applied this method to carbon black reinforced natural rubber to obtain Young＇s modulus distribution image together with reconstructed real topographic image. Then we were able to recognize three regions; rubber matrix, carbon black （or bound rubber） and intermediate regions. Though the existence of these regions had been investigated by pulsed nuclear magnetic resonance, this paper would be the first to report on the quantitative evaluation of the interfacial region in real space.     

New Layered Double Hydroxide, Zn–Ti LDH : Preparation and Intercalation Reactions

The layered double hydroxide (LDH) well known for its abilityto intercalate anionic compounds has been prepared conventionallyonly with bivalent and trivalent cations. In this study, Zn–Ti LDH consisting of bivalent and tetravalent cations was prepared, andreacted with organic monocarboxylic, dicarboxylic and aromatic acidsat high or room temperature. XRD patterns of the prepared LDH(Zn–Ti-CO₃) showed that interlayer spacing of the LDH was 0.67 nm. The value was small compared to the usual LDH (Zn–Al–CO₃)of 0.76 nm in the case of carbonate anion as the guest. Also, DTA,TG and DTG analysis indicated that the electrostatic force betweenthe layers and carbonate anions increased where the carbonate anionsin Zn–Ti LDH decomposed at 255 °C while those inZn–Al–CO₃ decomposed at 230–240 °C.     

A sensitive and selective determination method of histamine by HPLC with intramolecular excimer-forming derivatization and fluorescence detection

A highly sensitive, selective and simple method is described for the determination of histamine by high-performance liquid chromatography (HPLC) with fluorescence detection. The method is based on an intramolecular excimer-forming fluorescence derivatization of histamine with 4-(1-pyrene)butyric acid N-hydroxysuccinimide ester (PSE), followed by reversed-phase HPLC. Histamine, having two amino moieties in a molecule, was converted to the dipyrene-labeled derivative by reaction with PSE. The derivative afforded intramolecular excimer fluorescence (450-540 nm), which can clearly be discriminated from the monomer fluorescence (370-420 nm) emitted from PSE. Typically, a 10 micro L sample solution was mixed with 100 micro L of derivatization reagent solution, which was a mixture of 0.5 mm PSE in acetonitrile and 0.5 mm potassium carbonate in water (8:2, v/v). The derivatization was carried out at 100 degrees C for 90 min. The PSE derivative of histamine could be separated by reversed-phase ODS column with isocratic elution using acetonitrile:water (82:18, v/v) containing 0.03% triethylamine. The detection limit (singnal-to-noise ratio = 3) of histamine was 0.5 fmol for a 30 micro L injection. The method was successfully applied to the determination of histamine in human urine, and had enough selectivity and sensitivity for urinary histamine quantification.     

Fe K‐Edge X‐ray Absorption Fine Structure Determination of γ‐Al2O3‐Supported Iron‐Oxide Species

The structure of FeO_x species supported on γ‐Al₂O₃ was investigated by using Fe K‐edge X‐ray absorption fine structure (XAFS) and X‐ray diffraction (XRD) measurements. The samples were prepared through the impregnation of iron nitrate on Al₂O₃ and co‐gelation of aluminum and iron sulfates. The dependence of the XRD patterns on Fe loading revealed the formation of α‐Fe₂O₃ particles at an Fe loading of above 10 wt %, whereas the formation of iron‐oxide crystals was not observed at Fe loadings of less than 9.0 wt %. The Fe K‐edge XAFS was characterized by a clear pre‐edge peak, which indicated that the Fe?O coordination structure deviates from central symmetry and that the degree of Fe?O?Fe bond formation is significantly lower than that in bulk samples at low Fe loading (<9.0 wt %). Fe K‐edge extended XAFS oscillations of the samples with low Fe loadings were explained by assuming an isolated iron‐oxide monomer on the γ‐Al₂O₃ surface.     

Morphological studies of a hydrogen-bonded LC polymer obtained by photopolymerization in LC solvents

Anisotropic morphologies and the phase behaviour of a hydrogen-bonded LC polymer obtained by photopolymerization in two kinds of LC solvent are discussed. The hydrogen-bonded LC monomer, 4-(6-acryloyloxyhexyloxy) benzoic acid (A6OBA), was photopolymerized in 4-cyano-4′-hexyloxybiphenyl (6OCB) and in 4-cyano-4′-undecyloxybiphenyl (11OCB), which show a nematic phase and a smectic A phase, respectively. After photo-polymerization, the LC media were removed by extraction and the pure polymer was observed by scanning electron microscopy. SEM images showed that the polymer possessed fibrous morphology with a fibre diameter of a few micrometers, based on polymerization-induced phase separation. The overall geometries reflected typical LC characteristics such as schlieren and focal-conic fan textures. It was found that the hydrogen bond between benzoic acid groups in the monomer was rigid enough to fix the anisotropic phase-separated structure forming during the early stage of phase separation; however, it could not permanently maintain the fibre structure due to dissociation at elevated temperature. X-ray measurements revealed that a well developed layer structure of the hydrogen-bonded mesogen existed in the polymer obtained from the smectic phase of 11OCB, whereas a polymer layer structure could develop only partially from the nematic phase of 6OCB.     

Study of reduction processes over cerium oxide surfaces with atomic hydrogen using ultra accelerated quantum chemical molecular dynamics

Ceria plays an important role in catalysis, due to its ability to store and release oxygen depending on the condition present in the catalyst environment. To analyze the role of ceria in catalytic reactions, it is necessary to know the details of the interaction of ceria surface with environmentally sensitive molecules. This study was conducted using ultra accelerated quantum chemical molecular dynamics. Its purpose was to investigate the reduction process of the (1 1 1) and (1 1 0) surfaces of ceria with atomic hydrogen as well as water desorption mechanisms from the surfaces. This simulation demonstrated that when a high-energy colliding hydrogen atoms are adsorbed on the ceria, it pulls up an O atom from the ceria surfaces and results in the formation of a H₂O molecule. This is the first dynamics simulation related to such reduction processes based on quantum chemistry.     

Ruthenium(II)-catalyzed [2 + 2 + 2] cycloaddition of 1,6-diynes with tricarbonyl compounds

In the presence of catalytic amounts of Cp*Ru(cod)Cl, unsymmetrical 1,6-diynes possessing a variety of functional groups reacted with electron-deficient tricarbonyl compounds at the ketone C=O double bonds to selectively afford dienones via electrocyclic ring opening of the expected alpha-pyrans. The intramolecular Michael addition of the cycloadducts having an acetyl and an alkylidenemalonate moiety gave bicyclo[3.3.0]octenone derivatives.     

Broad-spectrum frequency comb generation and carrier-envelope offset frequency measurement by second-harmonic generation of a mode-locked fiber laser

A frequency comb spanning more than one octave has been achieved by injecting the second-harmonic generation (780 nm) of a mode-locked fiber laser (1.56 microm) into a photonic crystal fiber. We propose and realize a novel interferometric scheme for observing the carrier-envelope offset frequency of the frequency comb. Frequency noise has been observed on the measured carrier-envelope offset frequency, which has been confirmed to be generated in the photonic crystal fiber by comparing the measured beat frequencies between cw lasers and frequency combs before and after the photonic crystal fiber. The mode-locked fiber laser is considered to be an important candidate for the light source used in realizing a compact optical frequency measurement system including applications in the telecommunication bands.     

Synthesis and evaluation of 6-nitro-7-(1-piperazino)quinazolines: dual-acting compounds with inhibitory activities toward both tumor necrosis factor-alpha (TNF-alpha) production and T cell proliferation

We investigated the chemical modifications of the nitroquinazoline derivative (1) through the replacement of the NH group at the C(4)-position with several N-alkyl groups to increase the lipophilicity at the C(4)-position. Among them, we found that the N-methyl analogue (5a) showed a 2-fold loss in the inhibitory activity toward tumor necrosis factor-alpha (TNF-alpha) production in vitro as compared with the NH analogue (1); however, 5a exhibited an oral inhibitory activity on TNF-alpha production with an ED50 value of 26 mg/kg, whereas 1 did not. Moreover, the oral bioavailability of 5a was higher than that of 1 (1, F=1%; 5a, F=21%), and the calculated ClogP value for 5a was higher than that for 1. These results suggest that the improved lipophilicity of 5a compared with that of 1 reflects its greater inhibitory activity on TNF-alpha production in vivo as well as oral bioavailability.     

Radiation effects on dihydroxypropyl-chitosan

Dihydroxypropyl-chitosan (DHP-chitosan), a derivative of chitosan used in practical applications, is hardly soluble in water because of the strong intermolecular hydrogen bonding. In order to improve its even more advanced practical applications, some further modifications of the polymer using electron beam radiation technique were carried out. In the current work, diluted lactic acid was used to improve the solubility of DHP-chitosan as a subversive of hydrogen bonding. The effects of electron beam radiation on the DHP-chitosan in solid state and solution state were investigated. It was found that solid state and low concentrated solution state result in degradation and high concentrated solution state is favorable for crosslinking. And a simple, effective strategy to achieve a novel DHP-chitosan hydrogel without any crosslinking agents was developed in a high concentrated polymer solution system under irradiation.