强碱阴离子交换树脂及碱性洗脱剂的离子排阻/阴离子交换色谱法同时测定NH4+ ，NO2-和NO3-（英文）

Ion-exclusion/anion-exchange chromatography(IEC/AEC) on a combination of a strongly basic anion-exchange resin in the OH——form with basic eluent has been developed.The separation mechanism is based on the ion-exclusion/penetration effect for cations and the anion-exchange effect for anions to anion-exchange resin phase.This system is useful for simultaneous separation and determination of ammonium ion(NH+4),nitrite ion(NO-2),and nitrate ion(NO-3) in water samples.The resolution of analyte ions can be manipulated by changing the concentration of base in eluent on a polystyrene-divinylbenzene based strongly basic anion-exchange resin column.In this study,several separation columns,which consisted of different particle sizes,different functional groups and different anion-exchange capacities,were compared.As the results,the separation column with the smaller anion-exchange capacity(TSKgel Super IC-Anion) showed well-resolved separation of cations and anions.In the optimization of the basic eluent,lithium hydroxide(LiOH) was used as the eluent and the optimal concentration was concluded to be 2 mmol/L,considering the resolution of analyte ions and the whole retention times.In the optimal conditions,the relative standard deviations of the peak areas and the retention times of NH+4,NO-2,and NO-3 ranged 1.28%-3.57% and 0.54%-1.55%,respectively.The limits of detection at signal-to-noise of 3 were 4.10 μmol/L for NH+4,1.87 μmol/L for NO-2 and 2.83 μmol/L for NO-3.     

Characterization of magnetic nanoparticles modified with thiol functionalized PAMAM dendron for DNA recovery

Magnetic nanoparticles (MNPs) modified with the thiol functionalized polyamidoamine (PAMAM) dendron were synthesized to estimate their DNA recovery capabilities. Aminosilane-modified MNPs and MNPs surrounded by a phospholipid (distearoylphosphatidylethanolamine (DSPE)) bilayer were used as core particles. Cystamine-core PAMAM dendrimers were reduced by dithiothreitol to dendron thiols and chemically conjugated to the core particles. Characterization of the synthesis revealed an increase of the surface amine charge from generation 1 (G1) to G6, starting with an aminosilane initiator. Particle size distribution analysis indicated that G6 PAMAM-modified MNPs exhibited monodispersity in an aqueous solution. G6 PAMAM-MNPs and G6 PAMAM-PE-MNPs synthesized by the proposed method have equivalent DNA recovery abilities to PAMAM-MNPs prepared by the conventional divergent synthesis method. In optimized conditions, 96% of λDNA was recovered using G6 PAMAM-PE-MNPs. Therefore, the method for preparing PAMAM-MNPs and PAMAM-PE-MNPs proposed in this study will be a novel approach for producing DNA carriers for efficient DNA purification by magnetic separation.     

Preparation of alkyl-modified silicon nanosheets by hydrosilylation of layered polysilane (Si6H6)

Alkyl-modified crystalline silicon nanosheets 2 were synthesized and maintained the crystal structure of a Si(111) plane, in which the dangling silicon bond is stabilized by capping with the alkyl group. 2 was characterized using UV-vis, Fourier transform-infrared, and X-ray photoelectron spectroscopies; X-ray diffraction; and X-ray absorption near edge structure analysis. A model structure is proposed that has a periodicity through the nanosheet surface.     

Structures and Reaction Mechanism of Novel Metal-Carbene Complexes Derived from Hypervalent Diazadiselenathiapentalenes

Abstract

Novel metal-carbene complexes (4) with a metallapentalene framework have been obtained from hypervalent diazadiselenathiapentalenes (3) by treating with Pt(PPh₃)₄, Pd(PPh₃)₄ and RhCl(PPh₃)₃. X-Ray investigations revealed that the central hypervalent sulfur atom in 3 was substituted by a metal atom to form M-Se bonds in the resultant metallapentalene framework.     

Syntheses,Structures, and Reactivities of Sulfur-Containing Cycloalkenes

Sulfur-containing cycloalkenes possessing disulfide units 1, 2, and 3 were obtained by oxidation of cis-disodium ethene-1,2-dithiolate, and their crystal structures were determined by the X-ray crystallographic analyses. Compound 1 was found to give the ring expansion product 3 in acetonitrile even at room temperature and also form reactive thioaldehyde under irradiation.     

Morphological studies of a hydrogen-bonded LC polymer obtained by photopolymerization in LC solvents

Anisotropic morphologies and the phase behaviour of a hydrogen-bonded LC polymer obtained by photopolymerization in two kinds of LC solvent are discussed. The hydrogen-bonded LC monomer, 4-(6-acryloyloxyhexyloxy) benzoic acid (A6OBA), was photopolymerized in 4-cyano-4′-hexyloxybiphenyl (6OCB) and in 4-cyano-4′-undecyloxybiphenyl (11OCB), which show a nematic phase and a smectic A phase, respectively. After photo-polymerization, the LC media were removed by extraction and the pure polymer was observed by scanning electron microscopy. SEM images showed that the polymer possessed fibrous morphology with a fibre diameter of a few micrometers, based on polymerization-induced phase separation. The overall geometries reflected typical LC characteristics such as schlieren and focal-conic fan textures. It was found that the hydrogen bond between benzoic acid groups in the monomer was rigid enough to fix the anisotropic phase-separated structure forming during the early stage of phase separation; however, it could not permanently maintain the fibre structure due to dissociation at elevated temperature. X-ray measurements revealed that a well developed layer structure of the hydrogen-bonded mesogen existed in the polymer obtained from the smectic phase of 11OCB, whereas a polymer layer structure could develop only partially from the nematic phase of 6OCB.     

Electrothermal atomic absorption spectrometric determination of cadmium in environmental samples with niobium wire preconcentration method

A preconcentration method by adsorption of cadmium on a niobium wire was developed for the environmental waters, followed by electrothermal atomic absorption spectrometry with a tungsten tube atomizer. After the preconcentration, the niobium wire was directly inserted into the tungsten tube atomizer. In the preconcentration (adsorption) process of cadmium, the optimal immersing time was 60?s. The effects of large amounts of concomitants on the preconcentration of cadmium were evaluated. When 10³–10⁴ fold excess of matrix elements existed in aqueous solution at pH 4 and 9, the cadmium response was profoundly affected by the matrix elements. However, the cadmium absorption signal was not significantly influenced at pH 7. Therefore, pH 7 was selected for the application into the real environmental samples. Under the optimal conditions, the detection limit (3S/N) for cadmium by the niobium wire preconcentration method was 7.0?pg?mL^?1 and the relative standard deviation was 6.8%. The method with preconcentration on a niobium wire was applied to the determination of cadmium in water and proved to be sensitive, simple and convenient. Because this preconcentration method can be utilized in the in situ treatment of trace cadmium in environmental water samples, it was unnecessary to carry the water samples to the analytical work place. The technique was shown to be useful for the determination of cadmium in environmental water samples at 0.1–1?µg?L^?1 levels.     

Efficient synthesis of (±)-8,14-cedranoxide using electrochemical method as a key step

(±)-8,14-Cedranoxide has been synthesized starting from 3,4-dimethoxyphenol, wherein 6-acetoxymethyl-2,6-dimethyl-9-methoxytricyclo[5.3.1.0^1,5]undec-9-en-8,11-dione as a key intermediate has been produced efficiently by means of electrochemical methods.     

Remark on the Helmholtz decomposition in domains with noncompact boundary

Let \(\varOmega \) be a domain in \(\mathbb {R}^{d+1}\) whose boundary is given as a uniform Lipschitz graph \(x_{d+1}=\eta (x)\) for \(x \in \mathbb {R}^d\) . For such a domain, it is known that the Helmholtz decomposition is not always valid in \(L^p(\varOmega )\) except for the energy space \(L^2 (\varOmega )\) . In this paper we show that the Helmholtz decomposition still holds in certain anisotropic spaces which include vector fields decaying slowly in the \(x_{d+1}\) variable. In particular, these classes include some infinite energy vector fields. For the purpose, we develop a new approach based on a factorization of divergence form elliptic operators whose coefficients are independent of one variable.