One-pot synthesis of polyrotaxanes via acyclic diene metathesis polymerization of supramolecular monomers

A one-pot synthesis of polyrotaxanes has been developed. The method employs a supramolecular monomer comprising a polymerizable ammonium salt and crown ether, in combination with dynamic ADMet polymerization. Ultimately, highly efficient complexation, polymerization, and end-capping were accomplished in a single operation to yield polyrotaxanes with M(w) up to 19.3 kDa and >80% of the repeat units being complexed.     

LC-ESI-MS-MS Method for Monitoring Dopamine,Serotonin and Their Metabolites in Brain Tissue

A rapid and precise LC-ESI-MS-MS method for the parallel identification and quantification of dopamine, serotonin and their metabolites (homovanillic acid, 3-methoxytyramine, 3,4-dihydroxyphenylacetic acid and 5-hydroxyindolacetic acid) from rat brain tissue without any pre-analysis adjustment of the sample such as pre-concentration or derivatization has been developed. In particular, the reaction-monitoring mode was selected for its extremely high degree of selectivity and the stable-isotope-dilution assay for its high precision of quantification. Alternation the ionization polarity in the course of mass spectrometry detection enabled to determine substances susceptible to various ionization modes in only one analysis run. This fact, in combination with an easy pre-treatment step, constitutes the method straightforward and time undemanding. The developed method was characterized with a high precision (≤19.5%, determined as RSD), an acceptable accuracy (≥82.0%, determined as recovery), a low limit of detection (≤0.40 ng/100 mg brain tissue) and a low limit of quantification (≤0.42 ng/100 mg brain tissue). The method has been applied in a recent animal study. The levels of the studied neurotransmitters have been determined in the rat brain hippocampus, prefrontal cortex, and striatum in an animal model of schizophrenia induced by an acute dose of a dizocilpine.     

Short- and long-term stability of lyophilised melatonin-loaded lecithin/chitosan nanoparticles

The aim of this study was to establish a freeze-drying process for melatonin-loaded lecithin/chitosan nanoparticles (NPs) to preserve their chemical and physical stability for a longer time period that what is possible in an aqueous suspension. Glucose and trehalose were investigated as potential excipients during freeze-drying of NP suspensions. Lecithin/chitosan NPs were characterised by mean diameter and zeta potential, ranging between 117.4 and 328.5 nm and 6.7 and 30.2 mV, respectively, depending on the lecithin type and chitosan content in the preparation. Melatonin loadings were up to 7.1%. For all lecithin/chitosan NPs, no notable differences in the mean particle size, size distribution, zeta potential or melatonin content were observed before or immediately after the lyophilisation process or after 7 months of storage at 4 °C. The residual moisture contents of lyophilisates with glucose and trehalose immediately after the lyophilisation process varied between 4.0-4.8% and 2.4-3.0%, respectively. All lecithin/chitosan NPs had a fully amorphous nature after the freeze-drying process, as indicated by modulated differential scanning calorimetry. NP lyophilisates with glucose had a low glass transition temperature (ca. 5 °C), confirming that lyophilisation with glucose as a cryoprotectant was not appropriate. All lyophilisates with trehalose had a glass transition temperature above the room temperature, allowing formation of the cake without a collapse of the structure, which was capable of preserving its characteristics and appearance following 7 months of storage at 4 °C.     

Tetramers Cu4(μ4-O)(η-X)6(L4): Analysis of structural data

This review summarizes structural parameters for forty five Cu₄(μ₄-O)(η-X)₆(L₄) tetramers. There are four types of structurally equal core units, CuCl₃ON, CuCl₃OO, CuCl₃OCl and CuBr₃ON. There are also tetramers which contain structurally unequal core units: CuCl₃ON (x2) and CuCl₂BrON (x2); CuCl₃ON (x1), CuCl₂BrON (x2) and CuCl₃OCl (x1). There is a tendency for an elongated Cu?Cu separation as well as Cu–L bond distances with increase of the covalent radius of the coordinating atom(s). Tetrahedral distortion around oxygen atom (OCu₄) increases in the order: 1.67° (CuCl₃OCl) < 2.10° (CuCl₃ON) < 2.11° (CuCl₃OO′) < 2.27° (CuBr₃ON). The mean Cu–Cl–Cu bridge angle of 80.5° is about 4.0° more open than that of a Cu–Br–Cu (76.5°). The cluster Cu₁₆O₄Br₇Cl₁₇(4-Mepy)₁₆ (4-Mepy = 4-methylpyridine) contains four crystallographically independent tetramers: Cu₄OBrCl₅(4-Mepy)₄ (1), Cu₄OBrCl₅(4-Mepy)₄ (2) Cu₄OBr₂Cl₄(4-Mepy)₄ (3) and Cu₄OBr₃Cl₃(4-Mepy)₄ (4), which is a unique example of stereoisomerism. There are other examples which exist in two isomeric forms. Another contains two or even four crystallographically independent tetramers within the same crystal, differing mostly by degree of distortion and is an examples of distortion isomerism. Pairs of Cu₄OCl₆(n-Meim)₄ (n-Meim = n-methylimidazole) (n = 1 or 2) are examples of ligand isomerism.     

Relativistic effects in spectroscopy and photophysics of heavy-metal complexes illustrated by spin–orbit calculations of [Re(imidazole)(CO)3(phen)]+

Spin–orbit coupling (SOC) is an essential factor in photophysics of heavy transition metal complexes. By enabling efficient population of the lowest triplet state and its strong emission, it gives rise to a very interesting photophysical behavior and underlies photonic applications such as organic light emitting diodes (OLED) or luminescent imaging agents. SOC affects excited-state characters, relaxation dynamics, radiative and nonradiative decay pathways, as well as lifetimes and reactivity. We present a new photophysical model based on mixed-spin states, illustrated by relativistic spin–orbit TDDFT and MS-CASPT2 calculations of [Re(imidazole)(CO)₃(1,10-phenanthroline)]⁺. An excited-state scheme is constructed from spin–orbit (SO) states characterized by their energies, double-group symmetries, parentages in terms of contributing spin-free singlets and triplets, and oscillator strengths of corresponding transitions from the ground state. Some of the predictions of the relativistic SO model on the number and nature of the optically populated and intermediate excited states are qualitatively different from the spin-free model. The relativistic excited-state model accounts well for electronic absorption and emission spectra of Re^I carbonyl diimines, as well as their complex photophysical behavior. Then, we discuss the SO aspects of photophysics of heavy metal complexes from a broader perspective. Qualitative SO models as well as previous relativistic excited-state calculations are briefly reviewed together with experimental manifestations of SOC in polypyridine and cyclometallated complexes of second- and third row d⁶ metals. It is shown that the relativistic SO model can provide a comprehensive and unifying photophysical picture.     

Use of disposable open tubular ion exchange pre-columns for in-line clean-up of serum and plasma samples prior to capillary electrophoretic analysis of inorganic cations

A simple analytical system using disposable, open-tubular ion exchange clean-up precolumns coupled in-line to capillary electrophoresis for direct injection of biological samples is presented. The clean-up precolumns were prepared from fused silica capillaries by thermally initiated layer-by-layer polymerization of poly(butadiene-maleic acid) (PBMA) directly on the capillary wall. Typically, 6 cm long precolumns with 4-layers of PBMA were used for sample pretreatment. A robust and reproducible coupling between the precolumn (75 μm ID) and the analytical capillary (50 μm ID) was achieved using an inexpensive, commercially available low dead volume union. No extra dispersion of the analyte zones was observed. Proteins and other high molecular weight compounds from biological sample matrices were retained on the cation-exchanger sites of the precolumn, which eliminated their adsorption on analytical capillary walls and ensured stable electroosmotic flow and migration times of target analytes. Unretained small inorganic cations migrated freely into the analytical capillary for separation and detection. Applicability of the sample clean-up procedure was proved by determination of major inorganic cations in blood serum and plasma samples using capillary electrophoresis with contactless conductivity detection. Separations were performed in background electrolyte solution consisting of 15 mM L-arginine, 12.5 mM maleic acid, 3 mM 18-crown-6 at pH 5.5 and repeatabilities of migration times and peak areas were below 1.5% and 7.3%, respectively. Less than 1 μL of biological sample was required for injection.     

Retention behaviour of imidazolium ionic liquid cations on 1.7 μm ethylene bridged hybrid silica column using acetonitrile-rich and water-rich mobile phases

The potential of 1.7 μm ethylene bridged hybrid silica phase was investigated for the separation of twelve imidazolium-based ionic liquid cations. U-shaped retention profile was observed for all solutes with an increase in retention at both low and high acetonitrile content. Chromatographic behaviour of imidazolium cations in both hydrophilic interaction chromatography (HILIC) and per aqueous liquid chromatography (PALC) modes was studied by varying key parameters such as buffer concentration and pH, acid additive, organic modifier and column temperature. Experimental data provided some evidences that under PALC conditions cationic solutes are retained predominantly by mixed hydrophobic/ion-exchange interactions. In the HILIC mode, both partitioning and ion-exchange interactions are responsible for the retention of solutes. Compared to PALC, HILIC provided significantly higher efficiencies with less or even no peak tailing, better separation selectivity and greater resistance to overload. In PALC mode gradient elution was required to achieve adequate retentivity of all solutes but selectivity was not sufficient to distinguish between solutes with very similar hydrophobicity. In contrast, under HILIC conditions twelve solutes were almost completely resolved in less than 4 min by using isocratic elution. Summarizing, it could be concluded that ethylene bridged hybrid silica column providing a dual retention mechanism offers the possibility of selecting between the two retention modes with opposite separation selectivity, just by changing the composition of the mobile phase.     

Enhanced comprehensive two-dimensional gas chromatographic resolution of polychlorinated biphenyls on a non-polar polysiloxane and an ionic liquid column series

A total of 196 out of 209 polychlorobiphenyl (PCB) congeners were resolved using GC×GC-TOFMS with a non-polar/ionic liquid column series consisting of poly(50%-n-octyl-50%-methyl)siloxane and (1,12-di(tripropylphosphonium)dodecane bis(trifluoromethansulfonyl)amide) in the first and second dimension, respectively. It has been found that 13 PCB congeners overlap in five doublets (CB12+CB13, CB62+CB75, CB70+CB76, CB97+CB125 and CB153+CB168) and one triplet (CB90+CB101+CB113). All toxic, "dioxin like" congeners were separated with no interferences from any PCB congener. The 109 PCBs present in Aroclor 1242 and the 82 PCBs present in Aroclor 1260 were resolved GC×GC-TOFMS analysis on this column set.     

On-line two-dimensional liquid chromatography-tandem mass spectrometric determination of estrogens in sediments

The development of an on-line system for the simultaneous determination of α-estradiol, β-estradiol, estrone and 17α-ethynylestradiol in river sediments is described. The analytes were extracted from sediments by microwave-assisted extraction. A crude extract was directly analysed by a heart-cutting two dimensional high-performance liquid chromatography-ion trap-tandem mass spectrometry with an atmospheric pressure photoionization source operating in the positive mode. The method shows excellent performance in terms of accuracy, precision, and sensitivity. The accuracy of each estrogen was in the range of 98.8-107.1%. Intra-batch and inter-batch precisions were in the range of 6.2-7.0% and 8.3-9.5%, respectively. The limits of detection ranged from 90 to 250 pg g(-1). A significant reduction in the total analysis time and a reduction in sample manipulation are the main advantages of the proposed method. Finally, the method was applied on real sediment samples.