Transamination Studies on N-(1-Alkenylthio)phthalimides and Related Compounds. Synthesis of 1-Alkenesulfenamides and 1-Alkenesulfonamides(1)

In an attempt to develop a method for the general preparation of 1-alkenesulfenamides, some N,N-bis(trimethylsilyl)-1-alkenesulfenamides (4) were converted to a number of nitrogen functionalized analogs through desilylation and acylation procedures. Mono- and dibenzoylated derivatives 5aand 6a did not undergo transamination reactions with simple amines. Transamination reactions could be achieved once compounds 4 were converted to thiophthalimides 7. The transamination products 8 are unstable to chromatography, but could be oxidized to 1-alkenesulfonamides 9 using MCPBA. Some of the sulfenamides 8 may be stable to distillation. 3-(Alkenylthioimino)phthalides 11, isomers of thiophthalimides 7, also react with amines, but the process of ring opening accompanies transamination. It was found that the transamination reactions of 11 probably involve the intermediacy of isomers 7.     

The Reactivity of Bis(para‐methoxyphenyl)telluroxide towards Triflic Acid and Diphenylphosphinic Acid. Theoretical Considerations of the Protonation and Hydration Process of Diorganotelluroxanes

The reaction of (p‐MeOC₆H₄)₂TeO with two equivalents of HO₃SCF₃ and HO₂PPh₂ provided the tetraorganoditelluroxanes (F₃CSO₃)(p‐MeOC₆H₄)₂TeOTe(p‐MeOC₆H₄)₂(O₃SCF₃) ( 1 ) and (Ph₂PO₂)(p‐MeOC₆H₄)₂TeOTe(p‐MeOC₆H₄)₂(O₂PPh₂)·2 Ph₂PO₂H ( 2 ) in good yields. Compounds 1 and 2 were characterized by solution and solid‐state ³¹P and ¹²⁵Te NMR spectroscopy, IR spectroscopy, electrospray mass spectrometry, conductivity measurements and single crystal X‐ray diffraction. In solution, compound 1 undergoes an electrolytic dissociation and reversibly reacts with traces of water to give the mononuclear cation [(p‐MeOC₆H₄)₂TeOH]⁺ and triflate anions. Theoretical aspects of the protonation and hydration of model telluroxanes R₂TeO (R = H, Me, Ph) were investigated by preliminary DFT calculations and compared to the corresponding selenoxanes R₂SeO. The tellurium dihydroxides R₂Te(OH)₂ seem to be more stable than the hydrogen‐bonded complexes R₂TeO·H₂O.     

Alanine racemase free energy profiles from global analyses of progress curves

Free energy profiles for alanine racemase from Bacillus stearothermophilus have been determined at pH 6.9 and 8.9 from global analysis of racemization progress curves. This required a careful statistical design due to the problems in finding the global minimum in mean square for a system with eight adjustable parameters (i.e., the eight rate constants that describe the stepwise chemical mechanism). The free energy profiles obtained through these procedures are supported by independent experimental evidence: (1). steady-state kinetic constants, (2). solvent viscosity dependence, (3). spectral analysis of reaction intermediates, (4). equilibrium overshoots for progress curves measured in D(2)O, and (5). the magnitudes of calculated intrinsic kinetic isotope effects. The free energy profiles for the enzyme are compared to those of the uncatalyzed and the PLP catalyzed reactions. At pH 6.9, PLP lowers the free energy of activation for deprotonation by 8.4 kcal/mol, while the inclusion of apoenzyme along with PLP additionally lowers it by 11 kcal/mol.     

Homolytic displacement at carbon: XI. Intramolecular homolytic displacement as a route to cyclopentane and tetrahydrofuran derivatives from hex-5-enyl- andhex-3-oxo-5-enylcobaloximes

5-Methylhex-5-enylcobaloxime reacts with carbon tetrachloride and with fluorotrichloromethane at 80–100°C to give substantially pure 1-methyl-1-(β,β,β-trichloroethyl)- and 1-methyl-1-β-fluoro-β,β-dichloroethyl)-cyclopentane. Hex-5-enylco-baloxime also gives trichloroethylcyclopentane from carbon tetrachloride, but the yield is dependent on the concentration of carbon tetrachloride. Similar cyclisation to give trichloroethyl- or fluorodichloroethyltetrahydrofuran is observed in the reactions of hex-3-oxo-5-enylcobaloxime with carbon tetrachloride and fluorotrichloromethane. However, no cyclisation was observed in the reactions of the ester, hex-2-one-3-oxo-5-enylcobaloxime, with carbon tetrachloride. These reactions are believed to take place by attack of a polyhalogenomethyl radical at the terminal unsaturated carbon of the organic ligand, followed either by an intramolecular homolytic displacement in which the carbon radical at position-5 attacks carbon-1 with displacement of cobaloxime(II), or by a halogen atom abstraction.     

The dose dependence of cyclobutane dimer induction and repair in UVB-irradiated human keratinocytes

UVB and UVA components of the solar spectrum or from artificial UV-sources might be important etiological factors for the induction and development of skin cancer. In particular, deficiencies in the capacity to repair UV-induced DNA-lesions have been linked to this phenomenon. However, until now only limited data are available on the biological and physical parameters governing repair capacity. We have, therefore, developed a flowcytometric assay using fluorescence-labeled monoclonal antibodies to study the dose-dependence of induction and repair of UVB-induced cyclobutane pyrimidine dimers in a spontaneously immortalized keratinocytic cell line (HaCaT). Our results show that the kinetics of recognition and incision of UVB-induced DNA lesions slows down by a factor of about 3 in a dose range of 100-800 J m-2. Furthermore, a thorough analysis of repair kinetics indicates that this reduction in repair capacity might not be dependent on saturation of enzymatic repair capacity (Michaelis-Menten) but may be caused by a UV-induced impairment of enzymes involved in DNA repair. Because this effect is evident in vitro at doses comparable to the minimal erythemal dose in vivo, our results might have significant impact on risk assessment for UV-induced carcinogenesis.     

Synthesis and photochemistry of side-chain liquid crystal polymers based on cinnamate esters

The syntheses of three methacrylate monomers with cinnamate ester side-chains and of a further monomer with a corresponding cinnamide side-chain are described. Two of the monomers, with isomeric structures, were thermotropic liquid crystals. Although the clearing points were very similar the crystal melting points differed by 8°C. One compound also exhibited a monotropic smectic phase, behavior not shown by its isomer. The other two monomers were not liquid crystalline. The monomers were polymerized by free radical polymerization, both as homopolymers and as copolymers with methyl methacrylate. In the case of one of the mesogenic ester monomers, copolymers with a cyanophenyl benzoate monomer were also prepared. Three of the four monomers formed thermotropic liquid crystalline homopolymers and the copolymers with the benzoate monomer were also liquid crystalline. The monomers were considered as photoactive components of polymeric liquid crystals. As a preliminary investigation of their photochemistry, copolymers with methyl methacrylate were prepared and irradiated in solution with a broad-band source. Under these conditions two of the materials show a facile photo-Fries rearrangement of the aryl cinnamate ester group. © 1992 John Wiley & Sons, Inc.     

Oxidation of alcohols by transition metal complexes—iv : The rhodium catalysed synthesis of esters from aldehydes and alcohols

Both RhH(CO)PPh₃)₃ and a catalyst made in _situ from RhCl₃·3H₂O, PPh₃ and Na₂CO₃ catalyse the reaction of a range of aldehydes with simple primary alcohols to give esters together with alcohols formed by reduction of the aldehydes. The proportion of ester can be increased by adding an efficient hydrogen acceptor. The reaction can also be used to produce 5- and 7-membered lactones from aromatic dialdehydes. Propan-2-ol and the _{in situ} catalyst reduce some aromatic aldehydes to the corresponding alcohols without concomitant ester formation.     

Dimethyldihydropyrene-dehydrobenzoannulene hybrids: studies in aromaticity and photoisomerization

The synthesis and study of dehydrobenzoannulene (DBA)-dimethyldihydropyrene (DDP) hybrids as models for the investigation of aromaticity in weakly diatropic systems is reported. Three new monofused DBA-DDP hybrids have been synthesized, and their NMR spectra are discussed with regard to quantifying the aromaticity remaining in multibenzene-fused DBAs. Nucleus-independent chemical shifts, determined at a series of locations for each compound, bond lengths, and (1)H and (13)C NMR chemical shifts were calculated and used to probe the aromaticity of these hybrids. Systems where more than one annulene/DBA is fused to the DDP core have also been obtained, and their potential use in photoinduced isomerization applications is discussed.     

Surface passivation of luminescent colloidal quantum dots with poly(dimethylaminoethyl methacrylate) through a ligand exchange process

Polydimethylaminoethyl methacrylate (PDMAEMA) was used as a multidentate ligand to modify the surface of CdSe/ZnS core-shell colloidal quantum dots in toluene with trioctylphosphine oxide (TOPO) as the surface ligand. Adsorption of PDMAEMA was accompanied by release of TOPO. The process is free of agglomeration, and the modified nanocrystals become soluble in methanol. The photoluminescence properties are well-preserved in either toluene or methanol.     

Optimization of zinc phosphate coating on 7075-T6 aluminum alloy

A zinc phosphate coating process on 7075-T6 aluminum alloy has been significantly improved through a combined approach of titanium colloid pretreatment, pH level adjustment, fluoride additive and ZnO/H₃PO₄ ratio adjustment. In particular, optimum phosphate coatings were formed in coating baths with a ZnO/H₃PO₄ ratio of 0.205 and 0.256. Coating morphology studied by SEM reveals that the adjustment in the coating procedure produces an improved crystalline coating layer with high coverage and small grain size. For coatings formed in a bath with a ratio of 0.205, the coverage of the crystalline patches on top of the amorphous coating base is almost complete. The chemical composition of the coating layers has been characterized by XPS and SIMS. The crystalline and amorphous coating phases formed in the bath with a ratio of 0.205 were found to have compositions given schematically as Zn_x(PO₄) and Zn_xAl_y(PO₄), respectively. In contrast, neither coating phase formed in the bath with a ratio of 0.256 shows the presence of Al.