Optimization of zinc phosphate coating on 7075-T6 aluminum alloy

A zinc phosphate coating process on 7075-T6 aluminum alloy has been significantly improved through a combined approach of titanium colloid pretreatment, pH level adjustment, fluoride additive and ZnO/H₃PO₄ ratio adjustment. In particular, optimum phosphate coatings were formed in coating baths with a ZnO/H₃PO₄ ratio of 0.205 and 0.256. Coating morphology studied by SEM reveals that the adjustment in the coating procedure produces an improved crystalline coating layer with high coverage and small grain size. For coatings formed in a bath with a ratio of 0.205, the coverage of the crystalline patches on top of the amorphous coating base is almost complete. The chemical composition of the coating layers has been characterized by XPS and SIMS. The crystalline and amorphous coating phases formed in the bath with a ratio of 0.205 were found to have compositions given schematically as Zn_x(PO₄) and Zn_xAl_y(PO₄), respectively. In contrast, neither coating phase formed in the bath with a ratio of 0.256 shows the presence of Al.     

Preparation and Characterization of Forsterite (Mg2SiO4) Xerogels

Mg2SiO4 gels were prepared from alkoxide precursors, and the formation of the forsterite crystal phase was studied after heat treatments up to 1200°C. Prehydrolyzed TEOS in solution with 2-methoxyethanol was mixed with Mg(OEt)2, and the solution was hydrolyzed using excess water. The resultant gels were dried at 100°C to form xerogels which were subsequently powdered. These powders were characterized using thermal analysis (DTA and TGA), surface area analysis (BET), X-ray diffraction (XRD) and transmission electron microscopy (TEM).DTA and XRD indicated that forsterite crystallized at 770°C, and by 1000°C the powders were predominantly crystalline. BET gave powder surface areas between 400 and 550 m2 g–1. TEM revealed angular particles with sizes between 0.2 and 2 m. The low temperature of crystallization of forsterite indicates a high degree of intimate mixing between the precursor alkoxides, although XRD indicated some degree of inhomogeneity.     

Validation of the LacTek test applied to spiked extracts of tissue samples: determination of performance characteristics

LacTek tests are competitive enzyme-linked immunosorbent assays intended for rapid detection of antimicrobial residues in bovine milk. In this study, the LacTek test protocol was modified for use with extracts of bovine tissue to detect beta-lactam, tetracycline, and sulfamethazine residues. Test performance characteristics--precision, accuracy, ruggedness, practicability, and analytical specificity and sensitivity--were investigated. Results suggest that LacTek tests can be easily adapted to detect antimicrobial residues in extracts of lean ground beef. However, positive samples may not contain residues at violative concentrations (i.e., Canadian maximum residue limits), and therefore, additional analysis would be required for final confirmation and quantitation (e.g., chromatography).     

Surface Functionalization Methods to Enhance Bioconjugation in Metal-Labeled Polystyrene Particles

Lanthanide-encoded polystyrene particles synthesized by dispersion polymerization are excellent candidates for mass cytometry based immunoassays, however they have previously lacked the ability to conjugate biomolecules to the particle surface. We present here three approaches to post-functionalize these particles, enabling the covalent attachment of proteins. Our first approach used partially hydrolyzed poly(N-vinylpyrrolidone) as a dispersion polymerization stabilizer to synthesize particles with high concentration of -COOH groups on the particle surface. In an alternative strategy to provide -COOH functionality to the lanthanide-encoded particles, we employed seeded emulsion polymerization to graft poly(methacrylic acid) (PMAA) chains onto the surface of these particles. However, these two approaches gave little to no improvement in the extent of bioconjugation. In our third approach, seeded emulsion polymerization was subsequently used as a method to grow a functional polymer shell (in this case, poly(glycidyl methacrylate) (PGMA)) onto the surface of these particles, which proved highly successful. The epoxide-rich PGMA shell permitted extensive surface bioconjugation of NeutrAvidin, as probed by an Lu-labeled biotin reporter (ca. 7 × 10(5) binding events per particle with a very low amount of non-specific binding) and analyzed by mass cytometry. It was shown that coupling agents such as EDC were not needed, such was the reactivity of the particle surface. These particles were stable and the addition of a polymeric shell was shown did not affect the narrow lanthanide ion distribution within the particle interior as analyzed by mass cytometry. These particles represent the most promising candidates for the development of a highly multiplexed bioassay based on lanthanide-labeled particles to date.     

Selection of a synthetic glycan oligomer from a library of DNA-templated fragments against DC-SIGN and inhibition of HIV gp120 binding to dendritic cells

We report the synthesis of a nucleic acid-encoded carbohydrate library, its combinatorial self-assembly into 37,485 pairs and a screen against DC-SIGN leading to the identification of consensus ligand motifs. A prototypical example from the selected pairs was shown to have enhanced binding. A dendrimer incorporating the selected motifs inhibited gp120's binding to dendritic cells with higher efficiency than mannan.     

High-throughput 3D spheroid culture and drug testing using a 384 hanging drop array

Culture of cells as three-dimensional (3D) aggregates can enhance in vitro tests for basic biological research as well as for therapeutics development. Such 3D culture models, however, are often more complicated, cumbersome, and expensive than two-dimensional (2D) cultures. This paper describes a 384-well format hanging drop culture plate that makes spheroid formation, culture, and subsequent drug testing on the obtained 3D cellular constructs as straightforward to perform and adapt to existing high-throughput screening (HTS) instruments as conventional 2D cultures. Using this platform, we show that drugs with different modes of action produce distinct responses in the physiological 3D cell spheroids compared to conventional 2D cell monolayers. Specifically, the anticancer drug 5-fluorouracil (5-FU) has higher anti-proliferative effects on 2D cultures whereas the hypoxia activated drug commonly referred to as tirapazamine (TPZ) are more effective against 3D cultures. The multiplexed 3D hanging drop culture and testing plate provides an efficient way to obtain biological insights that are often lost in 2D platforms.     

An efficient synthesis of 3-(N-piperidinemethyl)-2,2,5,5-tetramethyl-1-oxy-3-pyrroline,a promising radioprotector for cancer radiotherapy

Nitroxides can ameliorate the toxic effects of radiation during cancer therapy. Nitroxides are paramagnetic and can be used in magnetic resonance imaging (MRI) and electron paramagnetic resonance imaging (EPRI) to monitor in vivo oxidative stress status. Compound 5 (3-(N-piperidinemethyl)-2,2,5,5-tetramethyl-1-oxy-3-pyrroline) was found to be the most effective nitroxide radioprotector. An efficient synthesis for this promising radioprotector was developed.     

The synthesis and fluxional behavior of the first [2.1.2.1] metacyclophane

8,15,23,30-Tetramethyl[2.1.2.1]metacyclophane,4, is synthesised. Variable temperature ¹Hmr and ¹³Cmr spectra indicate that 4e is the most likely conformation and that at temperatures above 50°C the molecule is fluxional (ΔG^≠₃₂₃ = 15.4 kcal/mole).     

Intramolecular Stacking in Ternary Complexes Containing Uridine 5′-Triphosphate, 2,2′-Bipyridyl,and a Divalent Metal Ion

The stability constants of the ternary complexes containing UTP, 2,2′-bipyridyl (bipy), and Co²⁺, Ni²⁺, Cu²⁺, or Zn²⁺ (M²⁺) have been determined by potentiometric titrations (Table 1). Changes in stability are quantified by Δlog K_M = log K–log K. For the Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ systems Δlog K_M is 0.10, ?0.13, 0.36, and 0.15, respectively. All these ternary complexes are considerably more stable than would be expected on statistical grounds; indeed, for Co²⁺, Cu²⁺, and Zn²⁺, UTP^4? binds more tightly to M (bipy)²⁺ than to M²⁺. An UV. difference spectroscopic study suggests that stacked adducts between bipyridyl and the pyrimidine moiety of uridine are formed. ¹H-NMR. studies of the bipy/uridine, bipy/UTP, and bipy/UTP/Zn²⁺ systems (Figs. 1 and 2) confirm the presence of stacking in the binary adducts and in the ternary complex. There is also evidence for the existence of the stacked protonated complex, Zn(bipy) (HUTP)^?, with the proton at the γ-phosphate group. The acidity constant of this ternary complex has been measured (Fig. 3). The observed stability enhancement of stacked adducts by the formation of a metal ion bridge is discussed (Fig. 4) and biological implications are indicated.     

Cinnamate ester containing liquid crystalline side chain polymers

The synthesis of methacrylate esters of 4-cyanophenyl-(4-(ω-hydroxyalkyloxy)) cinnamates, with spacer lengths of 2 and 6 methylene units and the synthesis of the corresponding acrylate ester with a spacer of 2 methylene units are described. The methacrylate monomers were polymerized by free radical polymerization, both as homopolymers and as copolymers with the analogous benzoate monomer of spacer length 6. The acrylate ester could not be polymerized successfully under the same reaction conditions. Polymers were characterized by NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry, and thermo-optic observations. Of the monomers prepared, only the cinnamate with a hexamethylene spacer shows a mesophase, seen on supercooling of the melt. All of the polymers prepared were liquid crystalline, with smectic behavior predominating in the polymethacrylates with the longer spacer group. A narrow nematic region is seen just below the clearing temperature with a range of 3–9°C, nematic character is increased in the copolymer series with the degree of incorporation of the cinnamate monomer with the spacer group of length 2.