Gold nanoparticles fabricated by pulsed laser ablation in supercritical CO2

Nanosecond pulsed laser ablation (PLA) of gold plate with an excitation wavelength of 532?nm was carried out in supercritical CO₂ (scCO₂) to fabricate gold nanoparticles. Surface morphology of the gold plate after irradiation and the crater depth after PLA were observed by scanning electron microscopy and laser scanning microscopy, while extinction spectra of gold nanoparticles collected in the glass slide was measured by UV?CVis spectrophotometer. The gold plate was ablated at various scCO₂ densities and irradiation times at constant temperature of 40??C. The ablation was also conducted at atmospheric condition with air to evaluate the environmental dependence of ablation. Both surface morphology of the irradiated gold plate and crater depth formation were significantly affected by the changes in scCO₂ density, the surrounding environment, and irradiation time. As expected, the increasing scCO₂ density resulted in a deeper ablation crater, however, the deepest crater was obtained at a density of 0.63?g/cm³ or pressure of 10?MPa. Gold nanoparticles generated by PLA in scCO₂ have been confirmed at the spectra band near 530?nm.     

Comparison of two preparation methods of supported Li?Ni catalyst on alumina for selective oxidation of methane

Lithium-added nickel catalysts on alumina were prepared for CO₂ reforming of methane by two methods, precipitation and impregnation. Performances of the catalysts were investigated by TG, CO-adsorption and SEM analysis. The catalyst with ratio of Li/Ni=1.0 prepared by precipitation method has high nickel dispersion, catalytic activity and stability for CO₂ reforming of methane.     

Kinetic study on the dehydration of tert‐butyl alcohol catalyzed by ion exchange resins

The dehydration of tert‐butyl alcohol (TBA) in the liquid phase was studied by using an ion exchange resin, Amberlyst 15 (A15) in the H⁺ form. Experiments were carried out both in a semi‐batch reactor and in a continuous stirred tank reactor (CSTR) with wet or dry resins. The results with the dry resin in the semi‐batch reactor were different from those with the wet resin due to the swelling of resin in the presence of water. However, the results in CSTR agreed well with those in the semi‐batch reactor using the wet resin. A rate equation that considered the inhibition of water was formulated. The experimental results agreed well with the calculated ones. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 854–859, 1999     

Mechanisms and kinetics of living radical polymerizations

The polymerization rates and activation processes of several variants of living radical polymerization (LRP) are discussed on the basis of recent experimental and theoretical results. Because of bimolecular termination, which is inevitable in LRP as well as in conventional radical polymerization, the time‐conversion curves of LRP have several characteristic features depending on the experimental conditions, such as the presence or absence of conventional initiation. Despite the presence of termination (and initiation, in some cases), polymers obtained by LRP can have a low polydispersity, provided that the number of terminated chains is small compared to the number of potentially active chains. A large rate constant of activation, k_act, is another fundamental requisite for low polydispersities. Systematic experimental investigation into k_act has clarified the exact mechanisms of activation in several LRP systems. The magnitudes of k_act was found to largely differ from system to system.     

Development of hydrogenated ring‐opening metathesis polymers

New hydrogenated ring‐opening metathesis polymers with excellent thermal and optical properties were developed. These polymers were prepared by the ring‐opening metathesis polymerization of ester‐substituted tetracyclododecene monomers followed by the hydrogenation of the main‐chain double bond. The degree of hydrogenation was an important factor for the thermal stability of the polymers, and as complete hydrogenation as possible was necessary to obtain a thermally stable polymer. The completely hydrogenated ring‐opening polymer derived from 8‐methyl‐8‐methoxycarbonyl‐substituted monomer has a glass‐transition temperature of 171 °C and a 5% weight‐loss temperature of 446 °C. This polymer has excellent thermal and optical properties because of its bulky and unsymmetrical polycyclic structure in the main chain and is an alternative to glass or other transparent polymers such as poly(methyl methacrylate) and polycarbonate resin. This polymer has also been used in a wide variety of applications, such as optical lenses, optical disks, optical films, and optical fiber. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4661–4668, 2000     

Dual-wavelength spectrophotometry: Part VI. Qualitative and quantitative analysis by means of first-derivative spectra

Derivative spectrophotometry has many important applications, e.g. detecting trace chemicals in mixture and analyzing isomers or turbid samples, but such measurements have been difficult instrumentally. The first-derivative spectrum can be recorded easily by using dual-wavelength measurements, if the two wavelengths λ₃ and λ₂ are set very close to each other (usually 1–2 nm apart) and scanned simultaneously. Practical applications of derivative spectra in the analysis of rare earths and phenol mixtures are described.