Three-component coupling of acylphosphonates and two carbonyl compounds promoted by low-valent samariums: one-Pot synthesis of beta-hydroxyphosphonates

Three-component coupling of acylphosphonates and two carbonyl compounds leading to beta-hydroxyphosphonates has been achieved with low-valent samariums. Thus, acylphosphonates reacted with aldehydes in the presence of semicatalytic amounts of samarium metal or SmI(2) to give acyloxyphosphonates in good yields. The second coupling reaction of the acyloxyphosphonates with aldehydes or ketones promoted by SmI(2) afforded beta-hydroxyphosphonates instead of olefins. Moreover, these two reactions could be carried out in one pot.     

Novel rearrangement of twisted 2,4-di-alkyl 2-trans-4-trans pentadienals: An approach to cyclopentenones based on molecular mechanical consideration

Rearrangement of 2,4-di-$\text{trans}$-pentadienals $\text{IVa-d}$ was described as a consequence of the successive alkyl substitutions on the C-2 and C-4 positions. ¹H-FT nmr spectroscopy suggested that the reaction involves ketene $\text{VIII}$ as an intermediate.     

Reaction of 3,4-disubstituted 1,2,5-oxadiazole 2-oxides with dipolarophiles : Substituent and solvent effect on the reaction courses

A variety of symmetrically or unsymmetrically 3,4-disubstituttd furoxans such as dicyano, dialkyl, diacyl, bis(phenylsulfonyl), N.N'-dialkyldicarbamoyl, 3(or 4)-methyl-4(or -3)-phenyl(or nitro, ethoxy, phenoxy, phenylthio, pyrrolidinyl, phenylsulfonyl), 3(or 4)-ethyl-4(or -3)phcnyl, and 3(or 4)-ethoxy-4(or -3)-phenylsulfonylruroxan reacted with dipolarophiles in toluene or xylene at the refluxing temperature to give nitrone-type 1,3-dipolar cycloadducts, 5-substituted 1-aza-2,8-dioxabicyclo-[3.3.0]octanes and/or 3-substituted 2-isoxazoline 2-oxides. On the other hand, some of the furoxans gave 2-isoxazolines via nitrile oxide 1,3-dipolar cycloaddition in a toluene (or xylene)-DMF solvent at the refluxing temperature.     

The study in the relationship between serum calcium and serum parathyroid hormone (PTH) by employing the various kits of PTH assay

In order to evaluate the influences of serum PTH assay in the various concentrations of serum calcium, we divided into three groups which serum calcium had below 8.0 mg/dl, 8.2 mg/dl to 9.8 mg/dl and above 10.0 mg/dl at random samples and assayed PTH in serum sample, using various kits of PTH assay obtained from commercial sources. Our results suggested that the measurement of serum PTH influenced by the concentration of serum calcium and therefore, should be taken an attention of serum calcium in each sample.     

Encapsulating property of ap-t-butylcalix[6]arene derivative: Formation of charge-transfer complexes of alkadienes with iodine in the presence of octopus-type calix[6]arene

This paper deals with the ability ofp-tert-butylcalix[6]arene derivative1, which has six 3,6,9-trioxadecyl substituents at the phenolic oxygens, to encapsulate CT complexes of alkadienes with iodine. By adding I₂ to alkadienes in CH₂Cl₂ in the presence of1, the absorbance at 363 nm, which was ascribed to I ₃ ^– ion, increased in the order: 1,5-hexadiene<1,9-decadiene 1,7-octadiene. The reactivity features of the CT complexes in the presence of1 are discussed.     

Discrete palladium clusters that consist of two mutually bisecting perpendicular planes

The construction of novel molecules with unprecedented alignments of the constituent elements has revolutionized the field of functional materials. The arrangement of two or more planar subunits in a mutually perpendicular fashion is a frequently encountered approach to produce novel functional materials. Previous examples of such materials can be categorized into two well-investigated families: spiro-conjugated and dumbbell-shaped structures, wherein the two planes are aligned orthogonally via a single atom or an axis, respectively. This article describes a third family: reaction of [Pd(CN^tBu)₂]₃ with Sn₃Me₈ or Ge₆Me₁₂ afforded a Pd₇Sn₄ cluster and a Pd₈Ge₆ cluster that consist of two mutually bisecting perpendicular planes. In the Pd₇Sn₄ cluster, the two equivalent Pd₅Sn₂ planes share three palladium atoms that include a dihedral angle of 85.6°.

The construction of Pd₇Sn₄ and Pd₈Ge₆ clusters that consist of two mutually bisecting perpendicular planes was accomplished by the reaction of [Pd(CN^tBu)₂]₃ with Me₃Sn–SnMe₂–SnMe₃ or Ge₆Me₁₂.     

Effect of pressure on the solubilities ofo-,m- andp-xylene in water

The solubilities of o-, m- and p-xylene in water were measured at 25.0°C up to 250, 385, and 50 MPa, respectively. The solubility increased with increasing pressure up to 120 MPa (50 MPa for p-xylene) and then decreased. The reaction volumes, V^o accompanying the dissolution at 0.1 MPa were estimated as –3.6±0.5, –3.4±0.5, and –4.1±0.5 cm³-mol^–1 for o-, m-, and p-xylene, respectively, from the pressure dependences of the solubilities. The limiting partial molar volumes, of p- and o-xylene in water under high pressure were estimated from V^o and the molar volume of the xylene. The partial molar volumes decreased with increasing pressure. The reaction volume for the formation of intra-molecular pairwise hydrophobic interaction between the methyl groups, as proposed by Ben-Naim, is discussed for the V^o of p- and o-xylene at 0.1 MPa.     

Oxime-based salen-type tetradentate ligands with high stability against imine metathesis reaction

Although salen and its analogues are versatile chelate ligands in inorganic and organometallic chemistry, synthesis of unsymmetrical salen derivatives consisting of two different salicylideneimine moieties is difficult because of the C=N bond recombination. To develop stable analogues of salen-type ligands, we synthesized a series of new ligands salamo (=1,2-bis(salicylideneaminooxy)ethane) on the basis of O-alkyl oxime instead of the imine moiety. Eight salamo ligands 1a-h were prepared in 64-88% yields as colorless crystals from the corresponding salicylaldehydes 2a-h. The crystal structure of 1a-c suggests that the oxime-OH form is more predominant than the keto-NH form. The reaction of 2a-e with excess 1,2-bis(aminooxy)ethane gave monooximes 3a-e in 59-86%, which further reacted with a different salicylaldehyde to afford unsymmetrical salamo ligands 4-8 as stable crystals in 51-70%. No reaction took place when a mixture of salamo derivatives 1a and 1b was treated at 40 degrees C in H2O/MeCN (5:95). However, the metathesis reaction of salen derivatives 9a and 9b completed in 2 h to give a statistical mixture. Monooxime 3b was much more stable than monoimine 11 which is difficult to be isolated. These results indicate the extremely high stability of the salamo derivatives 1 and precursors 3.     

An Efficient Method for the Conjugation of Hydrophilic and Hydrophobic Components by Solid‐Phase‐Assisted Disulfide Ligation

Chemical conjugation between hydrophilic and hydrophobic components is difficult because of their extremely different solubility. Herein, we report a new versatile method with a solid‐phase‐assisted disulfide ligation to overcome the difficulty of conjugation attributed to solubility. The method involves two steps in a one‐pot process: 1) loading of a hydrophobic molecule onto a resin in an organic solvent, and 2) release of the solid‐supported hydrophobic molecule as a conjugate with a hydrophilic molecule into an aqueous solvent. This strategy allows the use of a suitable solvent system for the substrates in each step. Conjugates of a water‐insoluble drug, plinabulin, with hydrophilic carriers that could not be prepared by solution‐phase reactions were obtained in moderate yields (29–45 %). This strategy is widely applicable to the conjugation of compounds with solubility problems.     

Synthesis,Structure, Optical,and Electrochemical Properties of Triple‐ and Quadruple‐Decker Co‐facial Tetrathiafulvalene Arrays

Understanding the details of the electronic structure in face‐to‐face arranged tetrathiafulvalenes (TTFs) is very important for the design of supramolecular functional materials and superior conductive organic materials. This article is a comprehensive study of the interactions among columnar stacked TTFs using trimeric (trimer) and tetrameric (tetramer) TTFs linked by alkylenedithio groups (‐S(CH₂)_nS‐, n=1–4) as models of triple‐ and quadruple‐decker TTF arrays. Single‐crystal X‐ray analyses of neutral trimeric TTFs revealed that the three TTF moieties are oriented in a zigzag arrangement. Cyclic voltammetry measurements (CV) reveal that the trimer and tetramer exhibited diverse reversible redox processes with multi‐electron transfers, depending on the length of the ‐S(CH₂)_nS‐ units and substituents. The electronic spectra of the radical cations, prepared by electrochemical oxidation, showed charge resonance (CR) bands in the NIR/IR region (1630–1850 nm), attributed to a mixed valence (MV) state of the triple‐ and quadruple‐decker TTF arrays. In the trimeric systems, the dicationic state (+2; 0.66 cation per TTF unit) was found to be a stable state, whereas the monocationic state (+1) was not observed in the electronic spectra. In the tetrameric system, substituent‐dependent redox processes were observed. Moreover, π‐trimers and π‐tetramers, which show a significant Davydov blueshift in the spectra, are formed in the tricationic (trimer) and tetracationic (tetramer) state. In addition, these attractive interactions are strongly dependent on the length of the linkage unit.