A conservative,thermodynamically consistent numerical approach for low Mach number combustion. Part I: Single-level integration

We present a numerical approach for low Mach number combustion that conserves both mass and energy while remaining on the equation of state to a desired tolerance. We present both unconfined and confined cases, where in the latter the ambient pressure changes over time. Our overall scheme is a projection method for the velocity coupled to a multi-implicit spectral deferred corrections (SDC) approach to integrate the mass and energy equations. The iterative nature of SDC methods allows us to incorporate a series of pressure discrepancy corrections naturally that lead to additional mass and energy influx/outflux in each finite volume cell in order to satisfy the equation of state. The method is second order, and satisfies the equation of state to a desired tolerance with increasing iterations. Motivated by experimental results, we test our algorithm on hydrogen flames with detailed kinetics. We examine the morphology of thermodiffusively unstable cylindrical premixed flames in high-pressure environments for confined and unconfined cases. We also demonstrate that our algorithm maintains the equation of state for premixed methane flames and non-premixed dimethyl ether jet flames.     

Synthesis and pharmacological evaluation of 3-amino-1-(5-indanyloxy)-2-propanol derivatives as potent sodium channel blockers for the treatment of stroke

In investigating potent sodium (Na(+)) channel blockers for the treatment of ischemic stroke, we synthesized a novel series of 3-amino-1-(5-indanyloxy)-2-propanol derivatives and evaluated their inhibitory effects on neuronal Na(+) channels. The 3-amino-1-(5-indanyloxy)-2-propanol derivatives exhibited potent blocking activity for Na(+) channels and a significantly low affinity for dopamine D(2) receptors, which demonstrates a minimal clinical risk for extrapyramidal side effects. In particular, compound 4b, a 3-amino-1-(5-indanyloxy)-2-propanol derivative bearing a benzimidazole moiety, showed desirable neuroprotective activity in a rat transient middle cerebral artery occlusion model. Furthermore, compound 4b displayed a high binding affinity for neurotoxin receptor site 2 of the Na(+) channels, which suggests that 4b would act as a use-dependent Na(+) channel blocker in sustained depolarization during ischemic stroke.     

Development of high-radiation-sensitive polymer gel for magnetic resonance imaging in three-dimensional dosimetry

We developed a high radiation sensitive polymer gel by modifying the amounts of the gel components and the temperature for the gel preparation. We evaluated its relaxation time linearity against dose and compared the measured dose distribution with the calculated one. For the relaxation time-dose linearity, irradiations were carried out with a linear accelerator using 6 MV photons and doses ranging from 0-5.0 Gy. The relationship between dose and R(2) value (reciprocal of T(2) relaxation time) was measured and it had good linearity over a wide range (0.3-5 Gy). The measured dose distributions were in good agreement with calculated ones. Since the present gel has higher sensitivity and it is synthesized more easily at lower cost than conventional polymer gels, we expect to see improved three-dimensional (3D) dosimetry using it.     

Fabrication of marker area to align TEM tomographic tilt series of rod-shaped specimens

In this study, we present a new method for placing markers for alignment of tomographic tilt-series of rod-shaped specimen before 3D reconstructions. By this method, markers (gold nanoparticles) were placed only on the carbon layer (referred to as the "marker area") deposited for protecting the specimen surface against ion beam irradiation; this placement was achieved by vacuum evaporation of gold with the help of a mask fabricated adjacent to the specimen. Experimental results showed that the use of the proposed method facilitates the identification of the markers in the alignment process, because the image of the marker area consists of simple high-contrast images of the gold nanoparticles on the carbon layer. The performance of the proposed method was successfully verified experimentally by applying it to a high-density Au/SiO? nanocomposite material as a test specimen.     

Rapid determination of 137Cs in environmental samples--purification of 137Cs by ammonium molybdophosphate column separation]

A rapid method for the determination of 137Cs in environmental samples was proposed. The principal technic employed in this study is based on column separation of 137Cs using ammonium molybdophosphate mixed with glass fiber to eliminate contribution of natural radionuclides such as 40K and 87Rb. The separation of cesium from potassium and rubidium was performed by the elution with 0.5m ammonium nitrate solution. The time required for separation of cesium was five hours as compared with the conventional cation exchange separation which required thirteen hours. The chemical yield of cesium carrier was normally more than 90 percent. The results obtained were compared with that by the conventional methods using Bio-Rex cation exchange separation and the good agreement between the two methods was obtained.     

A Facile Synthesis of 3,4-Diamino-2,5-Diacylthieno[2,3-b]Thiophenes from Disodium(Dimercaptomethylene)Malononitrile and α-Halo Ketones

Various kinds of α-halo ketones readily reacted with disodium (dimercaptomethylene)malononitrile to give the corresponding 34-diamino-2,5-diacylthieno-[2,3-b]thiophenes in good to excellent yields. The reaction was successfully extended to the synthesis of a thienothiophene derivative having two sydnone rings by using the 4-(bromoacetyl)sydnone.     

Synthesis and crystal structure of 5-methyl-5,10-dihydrophenarsazine

The X-ray crystal structure of 5-methyl-5,10-dihydrophenarsazine, C₁₃H₁₂NAs, has been determined. The crystals are orthorhombic, space group P2₁2₁2₁, a = 8.511(4), b = 5.690(1), c = 23.535(9) Å, V = 1139.7(1.0)A³, and Z = 4. Least-squares refinement converged to R = 0.049 and Rw = 0.045. The central ring is in a boat conformation and the 5-methyl group is in the axial position with respect to the central ring. The folding angle between the planes of the two benzo rings is 154.1(4)°.     

Rational Design of [13C,D14]Tert‐butylbenzene as a Scaffold Structure for Designing Long‐lived Hyperpolarized 13C Probes

Dynamic nuclear polarization (DNP) is a technique to polarize the nuclear spin population. As a result of the hyperpolarization, the NMR sensitivity of the nuclei in molecules can be dramatically enhanced. Recent application of the hyperpolarization technique has led to advances in biochemical and molecular studies. A major problem is the short lifetime of the polarized nuclear spin state. Generally, in solution, the polarized nuclear spin state decays to a thermal spin equilibrium, resulting in loss of the enhanced NMR signal. This decay is correlated directly with the spin‐lattice relaxation time T₁. Here we report [¹³C,D₁₄]tert‐butylbenzene as a new scaffold structure for designing hyperpolarized ¹³C probes. Thanks to the minimized spin‐lattice relaxation (T₁) pathways, its water‐soluble derivative showed a remarkably long ¹³C T₁ value and long retention of the hyperpolarized spin state.     

Synthesis of thermosensitive hydrogels from acryloyloxyethyl trialkyl phosphonium chloride–N‐isopropylacrylamide–N,N′‐methylenebisacrylamide terpolymers and their temperature dependence of water absorption

Thermosensitive polymer hydrogels were prepared by the copolymerization of three kinds of acryloyloxyethyl trialkyl phosphonium chlorides (AETRs) with alkyl chains of different lengths, with N‐isopropyl acrylamide (NIPAAm) and N,N′‐methylenebisacrylamide (MBAAm). The water content of the AETR–NIPAAm–MBAAm terpolymers obtained at molar ratios of the crosslinking agent greater than 2 decreased with increasing temperature and decreased sharply around 35 °C. However, the water contents of the AETR–NIPAAm–MBAAm (X/100/1) terpolymers obtained at a molar ratio of 1 of the crosslinking agent increased once with increasing temperature and then decreased from 3 to around 40 °C. The water contents of the AETR–NIPAAm–MBAAm (3/100/1 or 2) terpolymers decreased with the increasing length of alkyl chains in phosphonium groups in the terpolymers. The water contents of the AETR–NIPAAm–MBAAm terpolymers increased by the addition of a small amount of urea and then decreased with increasing urea concentration. However, the water contents decreased abruptly with the addition of NaCl. The AETR–NIPAAm–MBAAm terpolymers exhibited high adsorption for sodium dodecylbenzene sulfonate but no adsorption for sodium benzene sulfonate. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1505–1514, 2001