Application of electrochemical impedance spectroscopy in characterization of structural changes of printing plates

The porous structure of the aluminium oxide surface of lithographic printing plate (PP) has a most significant influence on the quality of the imprints. This study presents the results of application of electrochemical impedance spectroscopy (EIS) in characterization of PPs' porous structures and their changes during chemical processing. Two common PP types—thermal and conventional—were investigated. The influence of the processing solution’s working age on topographical changes of PP surface and associated change in the impedance spectra are investigated and discussed. The equivalent electrical circuit models reproducing the observed EIS spectra are proposed. Based on these models two mechanisms of surface’s topography changes responsible for degradation of PP performance due to the processing are identified and discussed.     

Negatively charged phospholipids trigger the interaction of a bacterial Tat substrate precursor protein with lipid monolayers

Folded proteins can be translocated across biological membranes via the Tat machinery. It has been shown in vitro that these Tat substrates can interact with membranes prior to translocation. Here we report a monolayer and infrared reflection-absorption spectroscopic (IRRAS) study of the initial states of this membrane interaction, the binding to a lipid monolayer at the air/water interface serving as a model for half of a biological membrane. Using the model Tat substrate HiPIP (high potential iron-sulfur protein) from Allochromatium vinosum, we found that the precursor preferentially interacts with monolayers of negatively charged phospholipids. The signal peptide is essential for the interaction of the precursor protein with the monolayer because the mature HiPIP protein showed no interaction with the lipid monolayer. However, the individual signal peptide interacted differently with the monolayer compared to the complete precursor protein. IRRA spectroscopy indicated that the individual signal peptide forms mainly aggregated β-sheet structures. This β-sheet formation did not occur for the signal peptide when being part of the full length precursor. In this case it adopted an α-helical structure upon membrane insertion. The importance of the signal peptide and the mature domain for the membrane interaction is discussed in terms of current ideas of Tat substrate-membrane interactions.     

The effect of the number of carbohydrate moieties on the azaphthalocyanine properties

A series of azaphthalocyanines (AzaPc) bearing one, two, four or eight isopropylidene-protected galactosyl units was prepared by azide-alkyne click reaction or by classical Pc template cyclotetramerization of the corresponding dicyanopyrazine and AzaPc properties important for photodynamic therapy were compared. All compounds absorbed at long wavelengths (above 650 nm) and belonged to strong singlet oxygen producers (Φ(Δ) = 0.58-0.64) retaining significant fluorescence emission (Φ(F) = 0.026-0.23). The only exception was the compound with four isopropyliden-protected galactosyl units where partial aggregation was observed. Removal of protecting groups increased the polar character of all AzaPc. However, only AzaPc bearing eight galactoses was found to be water-soluble (105 mg mL(-1)) but noticeably aggregated in water as well as in organic solvents (DMF, DMSO). Amphiphilic AzaPc bearing one deprotected galactose was incorporated into the lipidic bilayer of liposomes in a nonaggregated form. Liposomes may therefore be a suitable delivery system for this amphiphilic photosensitizer.     

Determination of sibiromycin and its natural derivatives using new analytical and structural approaches

A new separation and quantification method using ultra high-performance liquid chromatography (UHPLC) with UV detection was developed for the detection of sibiromycin in fermentation broth of Streptosporangium sibiricum. The solid phase extraction method based on cation-exchange was employed to pre-concentrate and purify fermentation broth containing sibiromycin prior to UHPLC analysis. The whole assay was validated and showed a linear range of detector response for the quantification of sibiromycin in a concentration from 3.9 to 250.0 μg mL⁻¹, with correlation coefficient of 0.999 and recoveries ranging from 71.66 ± 3.55% to 74.76 ± 5.18%. Method limit of quantification of the assay was determined as 0.18 μg mL⁻¹ and was verified with resulting RSD of 9.6% and accuracy of 97.6%. The developed assay was used to determine the sibiromycin production in 12 different fermentation broths. Moreover, several natural sibiromycin analogues/derivatives were described with pilot characterization using off-line mass spectrometry: the previously described dihydro-sibiromycin (DH-sibiromycin) and tentative bis-glycosyl forms of sibiromycin and its dihydro-analogue.     

Electrochemical detection of DNA binding by tumor suppressor p53 protein using osmium-labeled oligonucleotide probes and catalytic hydrogen evolution at the mercury electrode

In this paper, we present an electrochemical DNA–protein interaction assay based on a combination of protein-specific immunoprecipitation at magnetic beads (MBIP) with application of oligonucleotide (ON) probes labeled with an electroactive oxoosmium complex (Os,bipy). We show that double-stranded ONs bearing a dT₂₀ tail labeled with Os,bipy are specifically recognized by the tumor suppressor p53 protein according to the presence or absence of a specific binding site (p53CON) in the double-stranded segment. We demonstrate the applicability of the Os,bipy-labeled probes in titration as well as competition MBIP assays to evaluate p53 relative affinity to various sequence-specific or structurally distinct unlabeled DNA substrates upon modulation of the p53-DNA binding by monoclonal antibodies used for the immunoprecipitation. To detect the p53-bound osmium-labeled probes, we took advantage of a catalytic peak yielded by Os,bipy-modified DNA at the mercury-based electrodes, allowing facile determination of subnanogram quantities of the labeled oligonucleotides. Versatility of the electrochemical MBIP technique and its general applicability in studies of any DNA-binding protein is discussed. Figure

?     

Natural radioactivity around former uranium mine,Gabrovnica in Eastern Serbia

Gabrovnica near Kalna village was the first uranium mine established in Yugoslavia. In 1963, the Nuclear Energy Commission began operating the mine and mill. Between 1964 and 1966, the staff at Kalna extracted and produced an estimated 900 kg of UO₂ and 400 kg of uranium metal. The Kalna ore was of poor quality, containing very low uranium content, which required higher-cost mining and refining methods. That was the main reason for closing this mine. This paper presents results obtained by measuring the activity concentration of soil samples measured by gamma spectrometry and also indoor ²²²Rn activity concentrations in houses in the nearby village Kalna. There is a presence of elevated radioactivity levels in the most of the measured samples. The mine was never officially decommissioned. The results obtained might be useful for the future decommissioning procedure.     

On the adsorption of extended viologens at the electrode|electrolyte interface

Extended viologens represent a group of organic molecules intended to be used as molecular wires in molecular electronic devices. Adsorption properties of a novel series of extended viologen molecules were studied at the mercury electrode|electrolyte interface. These compounds form compact monolayers around the potential of zero charge with a constant differential capacitance value of 2.5 ± 0.2 μF cm(-2) independent of temperature, length of the molecule, and its bulk concentration. At more negative potentials their reduction in the adsorbed state takes place. We showed that the adsorption process is diffusion controlled and time needed to fully cover the electrode surface is independent of the electrode potential. A modified Koryta equation was employed for the calculation of the surface concentration of the adsorbates leading to the value of 5.3 × 10(-11) mol cm(-2) for the shortest wire and to 1.6 × 10(-11) mol cm(-2) for the longest one. Based on the space filling model and the differential capacitance value in the compact film region, it was postulated that these molecules lay flat on the electrode surface.     

Sucrose ester-based biocompatible microemulsions as vehicles for aceclofenac as a model drug: formulation approach using D-optimal mixture design

We assessed the functionality of sucrose esters (sucrose laurate, myristate, palmitate, and stearate), relatively innocuous nonionic surfactants, in formulation of biocompatible microemulsions. The putative influence of surfactant structure on the extension of microemulsion region was explored through the construction of the pseudo-ternary phase diagrams for the isopropyl myristate/sucrose ester-isopropyl alcohol/water system, using the titration method and mixture experimental approach. Minor changes in surfactant tail length strongly affected the microemulsion area boundaries. D-optimal mixture design proved to be highly applicable in detecting the microemulsion regions. Examination of conductivity, rheology, and thermal behavior of the selected sucrose laurate and sucrose myristate-based microemulsions, upon dilution with water, indicated existence of percolation threshold and suggested the phase inversion from water-in-oil to oil-in-water via a bicontinuous structure. Atomic force micrographs confirmed the suggested type of microemulsions and were valuable in further exploring their inner structure. The solubilization capacity of aceclofenac as a model drug has decreased as the water volume fraction in microemulsion increased. High surfactant concentration and the measured solubility of aceclofenac in microemulsion components suggested that the interfacial film may mostly contribute to aceclofenac solubilization.     

Thermal curing and water re‐exposure of silane–PVA/PVAc complex film on glass fiber surface

Because glass fiber reinforced composites are in industrial demand, chemistry and topography of the glass fiber sizing are of interest. Silane–PVA/PVAc (polyvinyl alcohol/polyvinyl acetate) complex film on the glass fiber surface is studied during thermal curing and water re‐exposure by using atomic force microscopy. The complex film consists of silane with the honeycomb structure film and PVA/PVAc with the hexagonal close pack structure of ellipsoidal shaped microspheres (270 × 620 nm). The thermal curing at 100 °C is leading to the evaporation of water contained in the microspheres. Because of water evaporation, the average roughness value of 1‐min thermal curing decreases from initial 7.3 to only 2.7 nm. Such a collapse of microsphere is followed by an intermixing between silane film and PVA/PVAc microspheres leading to a change of silane honeycomb structure along with silane tips. The average value of the silane honeycomb structure wall width decreases from 144 nm to 54 nm, for curing times of 15 and 30 min, respectively. A re‐exposure to an aqueous environment after 100 °C curing leads to almost completely restored microspheres regarding shape and size. The average complex film thickness increases from 180 nm for thermal curing for 30 min to 225 nm for water re‐exposed film. Interestingly, the pits in the microsphere structure are observed presumably because of the tips from intermixing. The thermal curing at 200 °C enhances the intermixing, and after 15 min, an intramixing is suggested to occur between PVAc core and PVA shell of the microsphere. The water re‐exposure after 15 min of 200 °C curing leads to a re‐containing of water but without restored microsphere structure; Because of the intramixing, leaving the silane–PVA/PVAc film is not complex anymore. Copyright © 2014 John Wiley & Sons, Ltd.     

Effect of surface and interlayer structure on the fluorescence of rhodamine B-montmorillonite: modeling and experiment

The surface and interlayer structure of rhodamine B (RhB)-montmorillonite for various guest concentrations has been studied using a combination of X-ray powder diffraction and molecular modeling (molecular mechanics and molecular dynamics) in the Cerius(2) modeling environment. The joint effect of surface and interlayer structure on the fluorescence spectrum has been observed and discussed in relation to the position and orientation of RhB(+) cations with respect to the silicate layer. Structural analysis showed that the surface and interlayer structures are different as to the arrangement of RhB(+) cations, and both of them strongly depend on the guest concentration in the intercalation solution and on the method of preparation. The repeated intercalation of montmorillonite by rhodamine B used in the present work allowed obtaining RhB-montmorillonite in the maximum degree of ion exchange for every sample.