Photoinitiators with functional groups. VII. Covalently bonded camphorquinone—amines

Camphorquinone (CQ), a widely used photoinitiator (PI) in dental applications, was covalently bonded to aromatic amines to enhance the rate of electron and proton transfer effect due to the close vicinity of the diketone and the amine group. 10‐bromocamphorquinone and 10‐bromomethylcamphorquinone were selected as suitable precursors for esterification with the carboxyl group containing aromatic amines based on 4‐dimethylaminobenzoic acid. Properties of the new photoinitiating systems were investigated by UV spectroscopy and differential scanning photocalorimetry in lauryl acrylate. Compared to physical mixtures, in all cases similar or even better performance was obtained. Surprisingly, 10‐acetyl derivatives 7 – 9 and 18 especially, were found to be highly reactive. Compared to CQ/ethyl 4‐dimethylaminobenzoate, the rate of photopolymerization was increased by a factor of up to 2. Intramolecular reaction was confirmed by photo‐differential scanning calorimetry experiments with varying PI concentrations. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4948–4963, 2004     

Accurate electrical and spectroscopic properties ofX 1Σ+ BeO from coupled-cluster methods

Summary This paper reports a series of coupled-cluster (CC) calculations through CCSDT on the theoretically challenging ground state of the BeO molecule. Along with CC methods, quadratic configuration interaction (QCI) approximations to CC theory have been used (QCISD and QCISD(T)), which show several dramatic failings. Equilibrium electrical properties (, _xx , and _zz ) and basic spectroscopic properties (r _e, _e,D _e, and infrared intensity (I)) have been computed. Basis set and electron correlation effects are analyzed in order to arrive at accurate values of the dipole moment and polarizability, which are not known experimentally. For the dipole moment, we obtain a value of 6.25 D, with an uncertainty of about 0.1 D. For _xx and _zz , we suggest respective values of 32 and 36 atomic units (a.u.) and error bars of about 1 and 2 a.u. With extended basis sets, the spectroscopic propertiesr _e, _e, andD _e are reproduced to high accuracy, which is the first time this has been achieved for this species byab initio methods. At the highest calculation levels,I is predicted to be very small. AlthoughI has not been measured, some support for this prediction comes from a recent infrared study of BeO-rare gas complexes. The QCI methods are shown to be much more sensitive to basis set, and even with large basis sets yield values of _zz andI which differ from CC results by an order of magnitude and three orders of magnitude, respectively. These differences doubtless arise from the importance of single excitations (T ₁) for this molecule, as several terms involvingT ₁ are neglected in the QCISD approximation compared with CCSD. We also report CC calculations with Brueckner orbitals, which yield results similar to those obtained with restricted Hartree-Fock orbitals.     

Voltammetric behavior of DNA modified with osmium tetroxide 2,2'-bipyridine at mercury electrodes

Osmium tetroxide complexes with nitrogen ligands (L) are probes of DNA structure and electroactive labels of DNA. Here adducts of single-stranded (ss) DNA with osmium tetroxide 2,2'-bipyridine (DNA-Os,bipy) were studied by cyclic voltammetry for the first time. It was found that at neutral pH DNA-Os,bipy produces three redox couples in the potential range between 0 and -1 V (peaks I-III) and a cathodic peak at about -1.3 V (peak IV). The latter peak decreased with increasing scan rate, and peaks arising from the forward and reverse scans exhibited the same direction, suggesting catalytic nature of the electrode process. We concluded that this peak corresponds to the known differential pulse voltammetric (polarographic) peak of DNA-Os,L adducts for which catalytic hydrogen evolution is responsible. In contrast, currents of cathodic peaks II and III increased almost linearly with increasing scan rate, suggesting involvement of adsorption in the electrode processes. Adsorptive stripping square-wave voltammetry was used to analyze the DNA-Os,bipy at low concentrations. It was shown that at neutral pH, peak III can offer sensitivity in the ppb range, which is only little lower than that reached by catalytic peak IV. The latter peak is, however, superior in sensitivity at acid pH values.     

Photometrische Wismutbestimmung mit Brenzcatechinviolett

Zusammenfassung Es wurden die Bedingungen der photometrischen Wismutbestimmung mit Brenzcatechinviolett bei der WellenlÄnge _max=580 nm ausgearbeitet und der Einflu\ der Fremdionen untersucht. Das Lambert-Beersche Gesetz gilt in den Konzentrationsgrenzen 0,0–6,2 g Bi/ml bei 1,6 cm Schichtdicke.

---

Summary A method is given for the photometric determination of bismuth using pyrocatechol violet, at the wave-length of _max=580 nm. Interferences by foreign ions have been examined. Beer's law is obeyed from 0.0 to 6.2 g Bi/ml (1,6 cm cuvettes).

---

---

Als erste Mitteilung dieser Reihe soll die Arbeit: Malát, M.: Naturwissenschaften 48, 569 (1961) betrachtet werden.     

Rapid determination of 90Sr in urine samples using AnaLig® Sr-01

This paper describes the use of IBC’s AnaLig^® Sr-01 molecular recognition technology product to effectively and selectively pre-concentrate, separate, and recover strontium from urine samples. This method uses two-stage columns separation consisting of two different commercial products Eichrom’s Pre-filter Material and AnaLig^® Sr-01 column from IBC Advanced Technologies. This method does not involve co-precipitation of strontium as phosphates and oxalates from urine samples. The new rapid method separates strontium-90 with high chemical recovery.     

Impact of silica environment on hyperfine interactions in 𝜖-Fe2O3 nanoparticles

Magnetic nanoparticles have found broad applications in medicine, especially for cell targeting and transport, and as contrast agents in MRI. Our samples of ??-Fe₂O₃ nanoparticles were prepared by annealing in silica matrix, which was leached off and the bare particles were then coated with amorphous silica layers of various thicknesses. The distribution of particle sizes was determined from the TEM pictures giving the average size ～20 nm and the thickness of silica coating ～5; 8; 12; 19 nm. The particles were further characterized by the XRPD and DC magnetic measurements. The nanoparticles consisted mainly of ??-Fe₂O₃ with admixtures of ～1 % of the α phase and less than 1 % of the γ phase. The hysteresis loops displayed coercivities of ～2 T at room temperature. The parameters of hyperfine interactions were derived from transmission Mössbauer spectra. Observed differences of hyperfine fields for nanoparticles in the matrix and the bare ones are ascribed to strains produced during cooling of the composite. This interpretation is supported by slight changes of their lattice parameters and increase of the elementary cell volume deduced from XRD. The temperature dependence of the magnetization indicated a two-step magnetic transition of the ??-Fe₂O₃ nanoparticles spread between ～85 K and ～150 K, which is slightly modified by remanent tensile stresses in the case of nanoparticles in the matrix. The subsequent coating of the bare particles by silica produced no further change in hyperfine parameters, which indicates that this procedure does not modify magnetic properties of nanoparticles.     

Improving detector signal processing with pulse height analysis in Mössbauer spectrometers

A plenty of different programming techniques and instrument solutions are used in the development of Mössbauer spectrometers. Each of them should provide a faster spectrum accumulation process, increased productivity of measurements, decreased nonlinearity of the velocity scale, etc. The well known virtual instrumentation programming method has been used to design a computer-based Mössbauer spectrometer. Hardware solution was based on two commercially-available PCI modules produced by National Instruments Co. Virtual Mössbauer spectrometer is implemented by the graphical programming language LabVIEW 7 Express. This design environment allows to emulate the multichannel analyzer on the digital oscilloscope platform. This is a novel method based on Waveform Peak Detection function which allows detailed analysis of the acquired signal. The optimal treatment of the detector signal from various detector types is achieved by mathematical processing only. As a result, the possibility of an increase of signal/noise ratio is presented.     

РАСПРЕДЕЛЕНИЕ ЗВЕЗД, ОБУСЛОВЛЕННЫ Х КОСМИ ЧЕСКИМ ИЗЛУЧЕНИЕМ, В ЛДЕРНЫХ ЗМУЛЬСИЯХ

---

On the star distribution, caused by the cosmic rays in nuclear emulsions

     

ФОТОЯДЕРНЫЙ ЭФФЕКТ Н А НИКЕЛЕ, МЕДИ И ЦИНКЕ

, - 17,6 , . , (8±4)·10^–23, (7±4)·10^–23 (4±2)·10^{–23 2}. , - .