Electrochemistry of Cobalta Bis(dicarbollide) Ions Substituted at Carbon Atoms with Hydrophilic Alkylhydroxy and Carboxy Groups

In this study we explore the effect on the electrochemical signals in aqueous buffers of the presence of hydrophilic alkylhydroxy and carboxy groups on the carbon atoms of cobalta bis(dicarbollide) ions. The oxygen-containing exo-skeletal substituents of cobalta bis(dicarbollide) ions belong to the perspective building blocks that are considered for bioconjugation. Carbon substitution provides wider versatility and applicability in terms of the flexibility of possible chemical pathways. However, until recently, the electrochemistry of compounds substituted only on boron atoms could be studied, due to the unavailability of carbon-substituted congeners. In the present study, electrochemistry in aqueous phosphate buffers is considered along with the dependence of electrochemical response on pH and concentration. The compounds used show electrochemical signals around −1.3 and +1.1 V of similar or slightly higher intensities than in the parent cobalta bis(dicarbollide) ion. The signals at positive electrochemical potential correspond to irreversible oxidation of the boron cage (the C2B9 building block) and at negative potential correspond to the reversible redox process of (CoIII/CoII) at the central atom. Although the first signal is typically sharp and its potential can be altered by a number of substituents, the second signal is complex and is composed of three overlapping peaks. This signal shows sigmoidal character at higher concentrations and may be used as a diagnostic tool for aggregation in solution. Surprisingly enough, the observed effects of the site of substitution (boron or carbon) and between individual groups on the electrochemical response were insignificant. Therefore, the substitutions would preserve promising properties of the parent cage for redox labelling, but would not allow for the further tuning of signal position in the electrochemical window.     

Excitation of Electronic States of N<Subscript>2</Subscript> in Radio-Frequency Electric Field by Electron Impact

Excitation of electronic states of the N₂ molecule by electron impact is recognized as an essential process in nitrogen plasmas that strongly impacts their chemical reactivity and other properties. Many surface and coating technologies are based on radio-frequency plasma discharges in nitrogen. In this paper the electron impact excitation rate coefficients for singlet and triplet electronic states of the N₂ molecule have been calculated in non-equilibrium conditions in the presence of a radio-frequency electric field. A Monte Carlo simulation has been performed in order to determine non-equilibrium electron energy distribution functions within one period of the electric field. By using these distribution functions, the excitation rate coefficients have been obtained in the frequency range from 13.56 up to 500 MHz, at reduced electric field values from 200 to 700 Td.     

High-speed energy efficient selective removal of large area copper layer by laser induced delamination

An indirect laser-induced method for selective removal of large copper areas from a printed circuit board is theoretically and experimentally investigated. The results show that the threshold condition for the process involves phase transition of the epoxy-based substrate resin. Optimal parameters for maximizing process speed are found and discussed.     

Highly oriented crystalline Er:YAG and Er:YAP layers prepared by PLD and annealing

High quality, thick, highly oriented crystalline thin films of Yttrium Aluminum Garnet (Y₃Al₅O₁₂) and Yttrium Aluminum Perovskite (YAlO₃) doped with Erbium were prepared by pulsed laser deposition. Samples were created in vacuum or oxygen environment. Depositions were arranged at room temperature, or at high substrate temperatures ranging from 800 to 1100 °C. Amorphous layers were annealed by laser, or in oven (argon flow, temperatures in range from 1200 to 1400 °C). Fused silica and sapphire (0 0 0 1) were used as substrates. Properties of films were characterized by X-ray diffraction, atomic force microscopy, and by photoluminescence measurement. Size of crystalline grains was in the range 116-773 nm. Thickness of layers was up to 17 μm.     

The Bremsstrahlung Equation for the Spin Motion in?Electromagnetic?Field

The influence of the bremsstrahlung on the spin motion is expressed by the equation which is the analogue and generalization of the Bargmann-Michel-Telegdi equation. The new constant is involved in this equation. This constant can be immediately determined by the experimental measurement of the spin motion, or it follows from the classical limit of quantum electrodynamics with radiative corrections.     

Eigenvalue estimates for Schrödinger operators on metric trees

We consider Schrödinger operators on radial metric trees and prove Lieb–Thirring and Cwikel–Lieb–Rozenblum inequalities for their negative eigenvalues. The validity of these inequalities depends on the volume growth of the tree. We show that the bounds are valid in the endpoint case and reflect the correct order in the weak or strong coupling limit.     

Vapor pressure of selected aliphatic alcohols by ebulliometry. Part 2

Vapor pressures of six pentanols, 2-methyl-1-butanol (CAS Registry Number 137-32-6), 2-methyl-2-butanol (CAS Registry Number 75-85-4), 3-methyl-1-butanol (CAS Registry Number 123-51-3), 3-methyl-2-butanol (CAS Registry Number 598-75-4), 2-pentanol (CAS Registry Number 6032-29-7) and 3-pentanol (CAS Registry Number 584-02-1), were measured by the precision ebulliometry over an approximate pressure range from 9 to 99 kPa. The absolute uncertainties in pressure and temperature are estimated to be less than or equal to 7 Pa and 0.02 K, respectively. The results are represented by the Antoine equation and compared with available literature data.     

Fast and efficient separation of cytokinins from auxin and abscisic acid and their purification using mixed-mode solid-phase extraction

A method for separation of cytokinins from auxin and abscisic acid, which allows further separation of cytokinin ribotides from cytokinin bases, ribosides and glucosides and their purification on a single Oasis MCX column was developed. Due to the mixed reversed-phase and cation-exchange mode of the Oasis MCX sorbent the cationic cytokinin bases, ribosides and glucosides as well as the anionic auxin, abscisic acid and cytokinin ribotides are retained and can be sequentially eluted by solvents containing different concentrations of methanol and ammonium hydroxide. Characteristics of the method are high recoveries of analyzed phytohormones and their sufficient purity for quantification by HPLC–ELISA (RIA) or HPLC–MS.     

Purification of the specific immunoglobulin G1 by immobilized metal ion affinity chromatography using nickel complexes of chelating porous and nonporous polymeric sorbents based on poly(methacrylic esters). Effect of polymer structure

Ni2+ complexes of the chelating nonporous and porous bead sorbents based on methacrylic esters crosslinked with ethylene dimethacrylate were used in isolation of the horseradish peroxidase-specific immunoglobulin IgG1 from the crude mouse ascitic fluid by immobilized metal ion affinity chromatography (IMAC). Iminodiacetic and aspartic acids were attached to porous poly(glycidyl methacrylate) beads differing in size, morphology and chemical composition. Ethylenediaminetriacetic acid and quinolin-8-ol chelating groups were attached mainly to the surface hydroxyl groups in nonporous poly(diethylene glycol methacrylate) beads through spacers. The latter sorbents exhibited better kinetic characteristics than the former but a very low IgG1 sorption capacity. In a single-step IMAC procedure, the best efficiency in the specific IgG1 purification was obtained with porous sorbents (recovery 92%, purity 73%). Differences in IMAC separations are discussed from the point of view of morphology of polymer beads as well as of the type and concentration of chelating ligands.